SCH 40 Carbon Steel Seamless Pipe Suppliers in India, view CS ERW Pipe Price per meter
Carbon Steel Pipe
Carbon Steel Seamless Pipe
Carbon Steel Erw Pipe
Carbon Steel Welded Pipe
SCH 40 Carbon Steel Pipe
Black CS Rectangular Tubing
FBE and Epoxy Lined Carbon Steel Pipe available according to international standards and specifications
Carbon Steel Boilers Tubes use surface coating techniques that are economical and with a wide usable range. Carbon Steel Rectangular Tubing also uses a corrosion-resistant alloying technique with complete structure and high tightness. When these Carbon Steel Square Pipe are compared to nickel-based alloy pipe it can be noticed that their weight and price is reduced and the strength has increased. Epoxy Coated Carbon Steel Pipe has 10-15 % more service life as compared to corrosion resistant alloy steel. Epoxy Lined Carbon Steel Pipe can operate in a temperature range of -35 degrees C to 300 degrees C.
CS Seamless pipes are produced using a billet to manufacture a pipe that has no joint or seam. Whereas a Carbon Steel Welded Pipe has a seam since it is formed by using a plate that is rolled into a hollow pipe and joined by welding. These welded FBE Lined carbon steel pipes have a uniform wall thickness that can be inspected for defects. Carbon Steel Erw Pipe is also said to be environment friendly as it can be recycled. They can be made in thin walls and hence Carbon Steel Pipe Price Per Meter is cheaper than other stainless steel.
Coated Carbon Steel pipes are heavier and long lasting. PTFE Lined carbon steel pipes are widely used in the USA and Europe to construct homes that are resistant to tornadoes, fire, hurricanes, and earthquakes. Low Carbon Steel pipes may suffer from yield point runout whereas mild carbon seamless steel pipes may display low tensile strength. Besides these disadvantages, Large Diameter Carbon Steel Pipes are widely used in forging and automobile components. galvanized carbon steel pipe can be used in springs and high strength wires. They can also be used to make axel, knives, and punches. We have been manufacturing and supplying these black carbon steel pipes to our customers worldwide due to these properties.
Table Of Content
Large Diameter Coated Carbon Steel Pipe Manufacturer in india, Before Buy Check CS Seamless Pipe Weight and Thickness chart
Carbon Steel Pipe Pipes and tubes are made up of various materials. Elements such as carbon, nickel, chromium, are widely used as base elements. One such pipe is the Carbon Steel Pipe which is high in hardness. Carbon Steel Pipe Suppliers in India recommend these pipes as they have good strength and are less expensive. The ductility of these Carbon Steel tubes is low. It is used as a base pipe for bimetallic combination tubing. Carbon Steel Seamless Pipe displays high mechanical performance, high weldability, and safety. Moreover, these SCH 40 Carbon Steel Pipe also display high resistance to corrosion, good weldability, and high operational convenience.
- Standard: API 5L GR.B, ASTM A 106 GR.A, B & C., ASTM / ASME A 53 GR. A & B , API 5L GR.B, API 5L X 42
- Dimensions: ASME, ASTM and API
- Size (ERW Pipes): 1/2” NB to 24” NB
- Size (Seamless Pipes): 1/2” NB to 60” NB
- Size (SAW Pipes): 16” NB to 100” NB
- Form: Rectangular, Hydraulic, Square, Round Etc
- Schedule: SCH 80, SCH XXS, SCH 40, SCH XS, SCH 160 All Schedules, upto 12mm thk
- Specialized in: Large Diameter Size
- End: Beveled End, Plain End, Threaded
- Type : ERW / Seamless /Fabricated / Welded / LSAW Pipes
- Length : Double Random, Single Random & Cut Length.
| description | Price |
| Carbon Seamless Steel pipes Tube | US $ 600.0-1300.0 / Piece |
| Seamless Carbon Steel pipes | US $ 600.0-700.0 / Ton |
| Welded Carbon Steel pipes | US $ 550.0-800.0 / Ton |
| Round Black Carbon Seamless Steel pipes | US $ 500.0-1500.0 / Ton |
| Sch40 seamless and Welded Carbon Steel pipes | US $ 520-850 / Ton |
| High Precision Ms/Gi/Oiled/Painted Hollow Section Carbon ERW Steel pipes | US $ 650-900 / Ton |
| pipes Carbon or Low-Alloy Steel (Machanical and Hydraulic) | US $ 0.85-1 / kg |
| NB | Size | OD | 40S | 5S | 10S | S10 | S20 | S40 | S60 | XS/80S | S80 | S100 | S120 | S140 | S160 | XXS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
| 1/8” | 10.029 | 1.02 | 1.073 | 2.041 | ||||||||||||
| 1/4” | 13.072 | 1.07 | 2.024 | 3.002 | ||||||||||||
| 3/8” | 17.015 | 1.07 | 2.031 | 3.02 | ||||||||||||
| 15 | 1/2” | 21.034 | 2.08 | 1.07 | 2.01 | 2.077 | 3.073 | 3.073 | 4.078 | 7.047 | ||||||
| 20 | 3/4” | 26.067 | 2.09 | 1.07 | 2.01 | 2.087 | 3.091 | 3.091 | 5.056 | 7.082 | ||||||
| 25 | 1” | 33.04 | 3.04 | 1.07 | 2.08 | 3.038 | 4.055 | 4.055 | 6.035 | 9.009 | ||||||
| 32 | 1 1/4” | 42.016 | 3.06 | 1.07 | 2.08 | 3.056 | 4.085 | 4.085 | 6.035 | 9.07 | ||||||
| 40 | 1 1/2” | 48.026 | 3.07 | 1.07 | 2.08 | 3.068 | 5.008 | 5.008 | 7.014 | 10.02 | ||||||
| 50 | 2” | 60.033 | 3.09 | 1.07 | 2.08 | 3.091 | 5.054 | 5.054 | 9.074 | 11.01 | ||||||
| 65 | 2 1/2” | 73.003 | 5.02 | 2.01 | 3.01 | 5.016 | 7.001 | 7.001 | 9.053 | 14 | ||||||
| 80 | 3” | 88.09 | 5.05 | 2.01 | 3.01 | 5.049 | 7.062 | 7.062 | 11.01 | 15.02 | ||||||
| 90 | 3 1/2” | 101.06 | 5.07 | 2.01 | 3.01 | 5.074 | 8.008 | 8.008 | ||||||||
| 100 | 4” | 114.03 | 6 | 2.01 | 3.01 | 6.002 | 8.056 | 8.056 | 11.01 | 13.05 | 17.01 | |||||
| 125 | 5” | 141.03 | 6.06 | 2.08 | 3.04 | 6.055 | 9.053 | 9.053 | 12.07 | 15.09 | 19.01 | |||||
| 150 | 6” | 168.03 | 7.01 | 2.08 | 3.04 | 7.011 | 10.097 | 11 | 14.03 | 18.03 | 22 | |||||
| 200 | 8” | 219.01 | 8.02 | 2.08 | 3.08 | 6.04 | 8.018 | 10.03 | 12.07 | 12.07 | 15.01 | 19.03 | 20.06 | 23 | 22.02 | |
| 250 | 10” | 273.01 | 9.03 | 3.04 | 4.02 | 6.04 | 9.027 | 12.07 | 12.07 | 15.01 | 19.03 | 21.04 | 25.04 | 28.06 | 25.04 | |
| 300 | 12” | 323.09 | 9.05 | 4 | 4.06 | 6.04 | 10.03 | 14.03 | 12.07 | 17.05 | 21.04 | 25.04 | 28.06 | 33.03 | 25.04 | |
| 350 | 14” | 355.06 | 9.05 | 4 | 4.08 | 6.04 | 7.09 | 11.01 | 15.01 | 12.07 | 19.01 | 23.08 | 27.08 | 31.08 | 35.07 | |
| 400 | 16” | 406.04 | 9.05 | 4.02 | 4.08 | 6.04 | 7.09 | 12.07 | 16.07 | 12.07 | 21.04 | 26.02 | 31 | 36.05 | 40.05 | |
| 450 | 18” | 457.02 | 9.05 | 4.02 | 4.08 | 6.04 | 7.09 | 14.03 | 19.01 | 12.07 | 23.08 | 29.04 | 34.09 | 39.07 | 45.02 | |
| 500 | 20” | 508 | 9.05 | 4.08 | 5.05 | 6.04 | 9.05 | 15.01 | 20.06 | 12.07 | 26.02 | 32.05 | 38.01 | 44.05 | 50 | |
| 550 | 22” | 558.08 | 9.05 | 4.08 | 5.05 | 6.04 | 9.05 | 22.02 | 12.07 | 28.06 | 34.09 | 41.03 | 47.06 | 54 | ||
| 600 | 24” | 609.06 | 9.05 | 5.05 | 6.04 | 6.04 | 9.05 | 17.05 | 24.06 | 12.07 | 31 | 38.09 | 46 | 52.04 | 59.05 | |
| 650 | 26” | 660.04 | 9.05 | 7.09 | 13 | 12.07 | ||||||||||
| 700 | 28” | 711.02 | 9.05 | 7.09 | 13 | 12.07 | ||||||||||
| 750 | 30” | 762 | 9.05 | 6.04 | 7.09 | 7.09 | 13 | 12.07 | ||||||||
| 800 | 32” | 812.08 | 9.05 | 7.09 | 13 | 17.05 | 12.07 | |||||||||
| 850 | 34” | 863.06 | 9.05 | 7.09 | 13 | 17.05 | 12.07 | |||||||||
| 900 | 36” | 914.04 | 9.05 | 7.09 | 13 | 19.01 | 12.07 |
| Carbon Steel Pipes Types | Carbon Steel Pipes Wall thickness | Out diameter | Length |
|---|---|---|---|
| Black Carbon Steel ERW Pipes(As per need) | As per need | 1/2" NB – 24" NB | Custom |
| Welding Carbon Steel Pipes (Available + As per need) | As per need | 1/2" NB – 24" NB | Custom |
| Carbon Steel Seamless Pipes (As per need) | SCH 10 /SCH 5 / SCH 80 /SCH 40 / SCH 160 | 1/2" NB – 60" NB | Custom |
| Carbon Steel SAW Pipes | As per need | 16" NB – 100" NB | Custom |
| Over | NPS [DN Designator] | Under | ||
| in. | mm | in. | mm | |
| 1/64 (0.0015) | 0.04 | 1/8 to 1-1/2 [6 to 40], incl | 1/64 (0.0015) | 0.04 |
| 1/32 (0.0031) | 0.08 | Over 1-1/2 to 4 [40 to 100], incl | 1/32 (0.0031) | 0.08 |
| 1/16 (0.0062) | 1.06 | Over 4 to 8 [100 to 200], incl | 1/32 (0.0031) | 0.08 |
| 3/32 (0.0093) | 2.04 | Over 8 to 18 [200 to 450], incl | 1/32 (0.0031) | 0.08 |
| 1/8 (0.0125) | 3.02 | Over 18 to 26 [450 to 650], incl | 1/32 (0.0031) | 0.08 |
| 5/32 (0.0156) | 4.00 | Over 26 to 34 [650 to 859], incl | 1/32 (0.0031) | 0.08 |
| 3/16 (0.0187) | 4.08 | Over 34 to 48 [850 to 1200], incl | 1/32 (0.0031) | 0.08 |
we can help with all Carbon Steel Square/ Rectangular Tubing need, check Seamless Carbon Steel Boiler Tubes Schedule chart
| Size | Other Diameter | WT | Gallon | Weight | Pipe I.D | Section Modulus | Standard to XXHY | Schedule Pipes # |
| 1/2 | 0.084 | 0.0109 | .00158 | 0.085 | 0.0622 | .00407 | STD | 40 |
| 0.0147 | .00122 | 1.009 | 0.0546 | .00478 | XHY | 80 | ||
| 0.0188 | .00088 | 1.031 | 0.0464 | .00528 | 160 | |||
| 3/4 | 1.005 | 0.0113 | .00277 | 1.013 | 0.0824 | .00705 | STD | 40 |
| 0.0154 | .00225 | 1.048 | 0.0742 | .00853 | XHY | 80 | ||
| 0.0219 | .00153 | 1.095 | 0.0612 | .01006 | 160 | |||
| 1 | 1.0315 | 0.0133 | .00449 | 1.068 | 1.0049 | .01328 | STD | 40 |
| 0.0179 | .00374 | 2.017 | 0.0957 | .01606 | XHY | 80 | ||
| 0.0250 | .00271 | 2.085 | 0.0815 | .01904 | 160 | |||
| 1 1/4 | 1.066 | 0.0140 | .00777 | 2.027 | 1.0380 | .02346 | STD | 40 |
| 0.0191 | .00666 | 3.000 | 1.0278 | .02913 | XHY | 80 | ||
| 0.0250 | .00549 | 3.077 | 1.0160 | .03421 | 160 | |||
| 1 1/2 | 1.090 | 0.0145 | .01058 | 2.072 | 1.0610 | .03262 | STD | 40 |
| 0.0200 | .00918 | 3.063 | 1.0500 | .04118 | XHY | 80 | ||
| 0.0281 | .00730 | 4.086 | 1.0338 | .05079 | 160 | |||
| 2 | 2.0375 | 0.0109 | .01898 | 2.064 | 2.0157 | .04205 | 10 | |
| 0.0154 | .01743 | 3.066 | 2.0067 | .05606 | STD | 40 | ||
| 0.0218 | .01534 | 5.003 | 1.0939 | .07309 | XHY | 80 | ||
| 0.0250 | .01434 | 5.068 | 1.0875 | .08045 | ||||
| 0.0281 | .01344 | 6.029 | 1.0813 | .08666 | ||||
| 0.0344 | .01161 | 7.047 | 1.0687 | .09806 | 160 | |||
| 2 1/2 | 2.0875 | 0.0120 | .02833 | 3.053 | 2.0635 | .06870 | 10 | |
| 0.0203 | .02487 | 5.080 | 2.0469 | 1.00640 | STD | 40 | ||
| 0.0216 | .02435 | 6.014 | 2.0443 | 1.01169 | ||||
| 0.0250 | .02301 | 7.002 | 2.0375 | 1.02468 | ||||
| 0.0276 | .02202 | 7.067 | 2.0323 | 1.03386 | XHY | 80 | ||
| 0.0375 | .01842 | 10.002 | 2.0125 | 1.06371 | 160 | |||
| 3 | 3.050 | 0.0120 | .04336 | 4.034 | 3.0260 | 1.00411 | ||
| 0.0156 | .04147 | 5.058 | 3.0188 | 1.03122 | ||||
| 0.0172 | .04064 | 6.012 | 3.0156 | 1.04265 | ||||
| 0.0188 | .03984 | 6.066 | 3.0124 | 1.05342 | ||||
| 0.0216 | .03840 | 7.058 | 3.0068 | 1.07241 | STD | 40 | ||
| 0.0250 | .03672 | 8.069 | 3.0000 | 1.09372 | ||||
| 0.0281 | .03521 | 9.067 | 2.0938 | 2.01207 | ||||
| 0.0300 | .03431 | 10.026 | 2.0900 | 2.02253 | XHY | 80 | ||
| 0.0438 | .02811 | 14.034 | 2.0624 | 2.08774 | 160 | |||
| 3 1/2 | 4.00 | 0.0120 | .05768 | 4.098 | 3.0760 | 1.03776 | 10 | |
| 0.0226 | .05136 | 9.012 | 3.0548 | 2.03939 | STD | 140 | ||
| 0.0250 | .04998 | 10.002 | 3.0500 | 2.06001 | ||||
| 0.0281 | .04821 | 11.017 | 3.0438 | 2.08562 | ||||
| 0.0318 | .04617 | 12.052 | 3.0364 | 3.01400 | XHY | 80 | ||
| 4 | 4.05 | 0.0120 | .07404 | 5.062 | 4.0260 | 1.07612 | 10 | |
| 0.0156 | .07156 | 7.024 | 4.0188 | 2.02354 | ||||
| 0.0188 | .06942 | 8.067 | 4.0124 | 2.06296 | ||||
| 0.0203 | .06838 | 9.032 | 4.0094 | 2.08173 | ||||
| 0.0219 | .06725 | 10.002 | 4.0062 | 3.00184 | ||||
| 0.0237 | .06613 | 10.080 | 4.0026 | 3.02145 | STD | 40 | ||
| 0.0250 | .06528 | 11.036 | 4.0000 | 3.03611 | ||||
| 0.0281 | .06326 | 12.067 | 3.0938 | 3.07021 | 60 | |||
| 0.0312 | .06126 | 13.097 | 3.0876 | 4.00273 | ||||
| 0.0337 | .05972 | 15.000 | 3.0826 | 4.02713 | XHY | 80 | ||
| 0.0438 | .05361 | 19.002 | 3.0624 | 5.01790 | 120 | |||
| 0.0531 | .04822 | 22.053 | 3.0438 | 5.08997 | 160 | |||
| 5 | 5.0563 | 0.0188 | 1.00979 | 10.080 | 5.0187 | 4.01161 | ||
| 0.0219 | 1.00716 | 12.051 | 5.0125 | 4.07279 | ||||
| 0.0258 | 1.00391 | 14.063 | 5.0047 | 5.04500 | STD | 40 | ||
| 0.0281 | 1.00204 | 15.087 | 5.0001 | 5.08644 | ||||
| 0.0312 | .099647 | 17.051 | 4.0939 | 6.04074 | ||||
| 0.0344 | .09696 | 19.019 | 4.0875 | 6.09358 | ||||
| 0.0375 | .09449 | 20.080 | 4.0813 | 7.04300 | XHY | 80 | ||
| 0.0500 | .08495 | 27.006 | 4.0563 | 9.02534 | 120 | |||
| 0.0625 | .07590 | 32.099 | 4.0313 | 10.07976 | 160 | |||
| 6 | 6.0625 | 0.0109 | 1.06748 | 7.059 | 6.0407 | 3.05769 | 5 | |
| 0.0134 | 1.06488 | 9.030 | 6.0357 | 4.03475 | 10 | |||
| 0.0156 | 1.06260 | 10.079 | 6.0313 | 5.00107 | ||||
| 0.0188 | 1.05937 | 12.094 | 6.0249 | 5.09351 | ||||
| 0.0203 | 1.05780 | 13.094 | 6.0219 | 6.03804 | ||||
| 0.0219 | 1.05620 | 15.000 | 6.0187 | 6.08261 | ||||
| 0.0250 | 1.05306 | 17.004 | 6.0125 | 7.06905 | ||||
| 0.0280 | 1.05008 | 18.099 | 6.0065 | 8.04958 | STD | 40 | ||
| 0.0312 | 1.04688 | 21.006 | 6.0001 | 9.03416 | ||||
| 0.0344 | 1.04391 | 23.010 | 5.0937 | 10.0111 | ||||
| 0.0375 | 1.04082 | 25.005 | 5.0875 | 10.0893 | ||||
| 0.0432 | 1.03541 | 28.060 | 5.0761 | 12.0224 | XHY | 80 | ||
| 0.0500 | 1.02909 | 32.074 | 5.0625 | 13.0711 | ||||
| 0.0562 | 1.02346 | 36.043 | 5.0501 | 14.09806 | 120 | |||
| 0.0625 | 1.01787 | 40.009 | 5.0375 | 16.01821 | ||||
| 0.0719 | 1.00977 | 45.039 | 5.0187 | 17.08243 | 160 | |||
| 0.0864 | .09784 | 53.021 | 4.0897 | 20.0025 | XXHY | |||
| 1.0000 | .08727 | 60.013 | 4.0625 | 21.07719 | ||||
| 1.0125 | .07809 | 66.014 | 4.0375 | 23.01237 |
| Nominal (MM) | Pipes size (inch) | Outer diameter MM | Schedule 20 | Schedule 30 | Schedule STD | Schedule 40 | Schedule 60 | Schedule Extra | Strong (XS) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1/8 | 10.3 | 1.73 | 0.37 | 1.73 | 0.357 | 2.41 | 0.47 | ||||||
| 6 | ¼ | 13.7 | 2.24 | 0.63 | 2.24 | 0.625 | 3.02 | 0.804 | ||||||
| 10 | 3/8 | 17.1 | 2.31 | 0.84 | 2.31 | 0.84 | 3.2 | 1.1 | ||||||
| 15 | ½ | 21.3 | 2.77 | 1.26 | 2.77 | 1.26 | 3.73 | 1.62 | ||||||
| 20 | ¾ | 26.7 | 2.87 | 1.69 | 2.87 | 1.68 | 3.91 | 2.2 | ||||||
| 25 | 1 | 33.4 | 3.38 | 2.5 | 3.38 | 2.5 | 4.55 | 3.24 | ||||||
| 32 | 11/4 | 42.2 | 3.56 | 3.39 | 3.56 | 3.38 | 4.85 | 4.47 | ||||||
| 40 | 11/2 | 48.3 | 3.68 | 4.05 | 3.68 | 4.05 | 5.08 | 5.41 | ||||||
| 50 | 2 | 60.3 | 3.9 | 5.44 | 3.9 | 5.44 | 5.5 | 7.48 | ||||||
| 65 | 21/2 | 73 | 5.2 | 8.63 | 5.16 | 8.63 | 7 | 11.41 | ||||||
| 80 | 3/8 | 88.9 | 5.5 | 11.3 | 5.5 | 11.3 | 7.62 | 15.3 | ||||||
| 90 | 31/2 | 1.6 | 5.74 | 13.57 | 5.74 | 13.57 | 8.08 | 18.63 | ||||||
| 100 | 4 | 114.3 | 6.02 | 16.07 | 6.02 | 16.07 | 8.56 | 22.3 | ||||||
| 125 | 5 | 141.3 | 6.6 | 21.77 | 6.55 | 21.77 | 9.53 | 30.9 | ||||||
| 150 | 6 | 168.3 | 7.11 | 28.26 | 7.11 | 28.26 | 10.97 | 42.5 | ||||||
| 200 | 8 | 219.1 | 6.35 | 33.3 | 7 | 36.8 | 8.2 | 42.5 | 8.2 | 42.5 | 10.3 | 53.1 | 12.7 | 64.6 |
| 250 | 10 | 273 | 6.35 | 41.7 | 7.8 | 51.3 | 9.27 | 60.3 | 9.27 | 60.3 | 12.7 | 81.5 | 12.7 | 81.5 |
| 300 | 12 | 323.9 | 6.35 | 49.7 | 8.4 | 65.2 | 9.53 | 73.8 | 10.3 | 79.7 | 14.3 | 109 | 12.7 | 97.4 |
| 350 | 14 | 355.6 | 7.92 | 68.1 | 9.53 | 81.3 | 9.53 | 81.3 | 11.13 | 94.3 | 15.1 | 126.4 | 12.7 | 107 |
| 400 | 16 | 406.4 | 7.92 | 77.9 | 9.5 | 93.3 | 9.53 | 93.3 | 12.7 | 123 | 16.7 | 160 | 12.7 | 123 |
| 450 | 18 | 457.2 | 7.92 | 87.8 | 11.1 | 122 | 9.53 | 105 | 14.3 | 156 | 19 | 206 | 12.7 | 130 |
| 500 | 20 | 508 | 9.53 | 117.2 | 12.7 | 155.1 | 9.53 | 177.2 | 15.1 | 183 | 20.6 | 248 | 12.7 | 155.1 |
| 550 | 22 | 558.8 | 9.53 | 129 | 12.7 | 171 | 9.53 | 129 | 22.2 | 294 | 12.7 | 171 | ||
| 600 | 24 | 609.6 | 9.53 | 141 | 14.3 | 210 | 9.53 | 141 | 17.4 | 255 | 24.5 | 355 | 12.7 | 187 |
| DN Designator | NPS Designator | Inside Diameter | Outside Diameter | Wall Thickness | Nominal Weight (Mass) per unit Length | |
| (mm) | (mm) | (mm) | Threads & Couplings (kg/m | Plain End (kg/m) | ||
| 6 | 1/8″ | 6.08 | 10.03 | 1.073 | 0.037 | 0.037 |
| 8 | 1/4″ | 9.02 | 13.07 | 2.024 | 0.063 | 0.063 |
| 10 | 3/8″ | 12.05 | 17.01 | 2.031 | 0.084 | 0.084 |
| 15 | 1/2″ | 15.08 | 21.03 | 2.077 | 1.027 | 1.027 |
| 20 | 3/4″ | 20.09 | 26.07 | 2.087 | 1.069 | 1.069 |
| 25 | 1″ | 26.06 | 33.04 | 3.038 | 2.05 | 2.05 |
| 32 | 1-1/4″ | 35.01 | 42.02 | 3.056 | 3.04 | 3.039 |
| 40 | 1-1/2″ | 40.09 | 48.03 | 3.068 | 4.004 | 4.005 |
| 50 | 2″ | 52.05 | 60.03 | 3.091 | 5.046 | 5.044 |
| 65 | 2-1/2″ | 62.07 | 73 | 5.016 | 8.067 | 8.063 |
| 80 | 3″ | 77.09 | 88.09 | 5.049 | 11.035 | 11.029 |
| 90 | 3-1/2″ | 90.01 | 101.06 | 5.074 | 13.071 | 13.057 |
| 100 | 4″ | 102.03 | 114.03 | 6.002 | 16.023 | 16.007 |
| 125 | 5″ | 158.02 | 141.03 | 6.055 | 22.007 | 21.077 |
| 150 | 6″ | 154.01 | 168.03 | 7.011 | 28.058 | 28.026 |
| 200 | 8″ | 202.07 | 219.01 | 8.018 | 43.073 | 42.055 |
| 250 | 10″ | 254.05 | 273 | 9.027 | 63.036 | 60.029 |
| 300 | 12″ | 304.08 | 323.08 | 9.052 | 76.021 | 73.078 |
| Tolerance, % | Outside Diameter, inch |
|---|---|
| +22.05/-12.05 | 3≤OD≤18, WT/OD≤5% |
| +20.00/-12.05 | 1/8≤OD≤2-1/2 |
| +22.05/-12.05 | OD≥20, WT/OD≤5% |
| +15.00/-12.05 | 3≤OD≤18, WT/OD>5% |
| +15.0/-12.05 | OD≥20, WT/OD>5% |
Carbon Steel Structural Steel Pipe
| Pipe Standard | ASTM A519, ASTM A53, JIS G3444, ASTM A500, EN 10219/10210, DIN1629 |
| Uses | mechanism Industry, General structure |
| Product | Seamless Structural Pipe, Structural Seamless Pipe |
| Size Range | WT: 6-35mm |
| OD: 73-630mm | |
| LENGTH: 6/5.8/12m/11.8 |
Carbon Steel Precision Steel Pipe
| Standard | ST35, EN 10305, ST45, ST37, DIN 2391, ST52, DIN 2445 |
| Uses | Mechanical Structures, Automative Parts, Hydraulic Equipment |
| Type | Seamless Tube/Pipe |
| Size Range | WT: 0.5 to 10mm |
| OD: 6mm to 114mm | |
| LENGTH: 6/5.8/12m/11.8 | |
| Heat Treatment | GBK(+A), NBK(+N), BK(+C), BKS(+SR), BKW(+LC) |
Carbon Steel Boiler Pipe
| Standard | ASTM A179, ASTM A192, ASTM A210, ASTM A209, JIS G3462, JIS G3461, DIN17175, JIS3463, EN 10216-2 |
| Application | boiling water tube, steam/superheated pipeline |
| Type | Seamless |
| Size | WT: 2.3 to 40mm |
| OD: 21.3 to 711mm | |
| LENGTH: 6/5.8/12/11.8m |
|
|
 |
 |
 |
 |
Arcelor Mittal |
Essar Steel |
ISMT Ltd. |
Jindal SAW Ltd. |
 |
 |
 |
 |
Maharashtra Seamless Ltd. |
MAN Industries Ltd. |
Sumitomo |
Nippon Steel & Sumitomo Metal |
 |
 |
 |
 |
Lalit Pipes & Pipes Ltd. |
Ratnamani Metals & Tubes |
Tenaris |
Tata Steel |
 |
 |
 |
 |
| JFE Steel Corporation | United States Steel | Tubos Reunidos | Vallourec & mannesman Tubes |
Know more about Galvanized Carbon Steel Pipe Material grades available in different sizes buy online and save cost
| Standard | Grade | |
| Seamless Tubes for Elevated Temperature | DIN 17175 | St35.8, St45.8, 10CrMo910, 15Mo3, 13CrMo44, STPL340, STB410, STB510, WB36 |
| Seamless Tubes | DIN 1629 / DIN 2391 | St37.0, St44.0, St52.0, St52.3 |
| Seamless Tubes | DIN 2440 | St33.2 |
| Seamless Pipes for Structural Purpose | DIN 2393 | RSt34-2, RSt37-2, RSt44-2, St52 |
- PMI Testing
- Flaring Test
- Chemical Analysis
- Pitting Resistance Test
- Flattening Test
- Mechanical Testing
- Hardness Test
- IGC Test
- Micro and MacroTest
Refer our Carbon Steel Pipe supplied to Asian countries and other continents of World
| Philippines, Dammam -KSA, Belgium, Indonesia | Carbon Seamless Steel Pipe |
| Europe, Qatar, Thailand, France | 24 inch seamless carbon steel pipe |
| Thailand, Czechia, Malaysia, Germany | MS carbon seamless steel pipe |
| Bangladesh, Malaysia, Finland, USA | 4 Inch sch10s Carbon Steel seamless pipe |
| Kuwait, South Africa, Brazil, Saudi Arabia (KSA) | Galvanized Carbon Seamless Steel Pipe |
| Singapore, Bahrain, Singapore, South Africa | Seamless schedule 40 carbon steel pipe |
| UK, Philippines, Nigeria, Australia | Black Seamless Carbon Steel Pipe |
| Hong Kong, Oman, UAE, Malaysia | 30 Inch seamless CS pipes |
| Iran, Chile, Singapore, Italy | 120mm cs galvanized Pipes |
| Norway, United Arab Emirates (UAE), Malaysia, Turkey | Seamless Welded Carbon Steel Pipe |
| Russia, Netherlands, Dubai, Malaysia | Seamless Carbon Steel Pipe |
| Mexico, Egypt, UK, Spain | 10#20#35#45# Carbon Seamless Steel Pipe |
| Malaysia, United Kingdom -UK, UAE, Europe | Carbon Pre Galvanized Welded Steel Gi Pipes |
| Maximum Allowable Pressure (psi) | ||||||||||||||
| NPS | Outside Diameter | Schedule | ||||||||||||
| (in) | (in) | 20 | 10 | 30 | STD | 40 | XXS | XS | 60 | 80 | 100 | 120 | 140 | 160 |
| 1/4 | 0.054 | 7985 | 7985 | 10798 | 10798 | |||||||||
| 3/8 | 0.0675 | 6606 | 6606 | 9147 | 9147 | |||||||||
| 1/2 | 0.084 | 6358 | 6358 | 17150 | 8575 | 8575 | 10908 | |||||||
| 3/4 | 1.005 | 5273 | 5273 | 14373 | 7187 | 7187 | 10220 | |||||||
| 1 | 1.0315 | 4956 | 4956 | 13340 | 6670 | 6670 | 9316 | |||||||
| 1 1/4 | 1.066 | 4133 | 4133 | 11276 | 5638 | 5638 | 7380 | |||||||
| 1 1/2 | 1.09 | 3739 | 3739 | 10316 | 5158 | 5158 | 7247 | |||||||
| 2 | 2.0375 | 3177 | 3177 | 8995 | 4498 | 4498 | 7097 | |||||||
| 2 1/2 | 2.0875 | 3460 | 3460 | 9408 | 4704 | 4704 | 6391 | |||||||
| 3 | 3.05 | 3024 | 3024 | 8400 | 4200 | 4200 | 6132 | |||||||
| 3 1/2 | 4 | 2769 | 2769 | 3896 | 3896 | |||||||||
| 4 | 4.05 | 2581 | 2581 | 7339 | 3670 | 3670 | 4769 | 5782 | ||||||
| 5 | 5.0563 | 2273 | 2273 | 6606 | 3303 | 3303 | 4404 | 5505 | ||||||
| 6 | 6.0625 | 2071 | 2071 | 6390 | 3195 | 3195 | 4157 | 5318 | ||||||
| 8 | 8.0625 | 1420 | 1574 | 1829 | 1829 | 4971 | 2841 | 2307 | 2841 | 3375 | 4085 | 4613 | 5147 | |
| 10 | 10.075 | 1140 | 1399 | 1664 | 1664 | 4558 | 2279 | 2279 | 2708 | 3277 | 3847 | 4558 | 5128 | |
| 12 | 12.075 | 961 | 1268 | 1441 | 1560 | 3843 | 1922 | 2160 | 2644 | 3244 | 3843 | 4324 | 5042 | |
| 14 | 14 | 1092 | 875 | 1313 | 1313 | 1533 | 1750 | 2079 | 2625 | 3283 | 3829 | 4375 | 4921 | |
| 16 | 16 | 956 | 766 | 1148 | 1148 | 1531 | 1531 | 2009 | 2585 | 3157 | 3733 | 4404 | 4882 | |
| 18 | 18 | 849 | 681 | 1192 | 1021 | 1530 | 1361 | 2042 | 2553 | 3147 | 3743 | 4252 | 4848 | |
| 20 | 20 | 919 | 613 | 1225 | 919 | 1455 | 1225 | 1989 | 2526 | 3138 | 3675 | 4288 | 4824 | |
| 22 | 22 | 835 | 557 | 1114 | 835 | 1114 | 1949 | 2506 | 3063 | 3619 | 4176 | 4733 | ||
| 24 | 24 | 766 | 510 | 1147 | 766 | 1405 | 1021 | 1978 | 2489 | 3126 | 3700 | 4210 | 4786 | |
| 30 | 30 | 817 | 510 | 1021 | 613 | 817 | ||||||||
| 32 | 32 | 766 | 478 | 957 | 574 | 1054 | ||||||||
| 34 | 34 | 721 | 450 | 901 | 540 | 992 | ||||||||
| 36 | 36 | 681 | 425 | 851 | 510 | 1021 | ||||||||
| 42 | 42 | 583 | 729 | 438 | 875 | |||||||||
- Ship Building
- Power Plants
- Paper & Pulp
- Refineries
- Boilers
- Condensers
- Heat Exchangers
- Test Reports of Raw Material
- Quality Assurance Plan (QAP)
- WPS/PQR, Welding Procedure Qualification Record,
- NABL approved Laboratory Test Reports
- Guarantee Letter
- Form A for the purposes of the Generalized System of Preferences (GSP)
- as per EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Material Traceability Records
- Heat Treatment Charts
- Commercial Invoice which includes HS Code
- Test Certificates certifying NACE MR0175/ MR0103
- Fumigation Certificates
- Surface Finishes: Dual, 3LPP, Galv, 3LPE, FBE Coal Tar, Oiled, FBE, Bare, Concrete Coating, Mill Varnish and Tape Wrap.
- End Finishes: Beveled, Threaded, Square Cut & Coupled.
| Grade B | Grade A | Grade C | |
| Yield strength, min, psi (MPa) | 35,000 (240) | 30,000 (205) | 40,000 (275) |
| Tensile strength, min, psi (MPa) | 60000 (415) | 48,000 (330) | 70,000 (485) |
| specification | Grade | Chemical Composition [%] | ||||||||||||||||||||
| C | Mn | P | S | Si | Cr | Mo | Cu | Ni | V | |||||||||||||
| Min | Max.0 | Min | Max.0 | Max.0 | Max.0 | Min.0 | Max | Min.0 | Max | Min.0 | Max | Max | Max | Max | ||||||||
| HYDROCARBON PROCESS INDUSTRY/STRUCTURAL/PRESSURE VESSEL TUBES | ||||||||||||||||||||||
| ASTM
A-106 |
A B c |
-
- - |
0.025
0.030 0.035 |
0.027
0.029 0.029 |
0.093
1.006 1.006 |
0.0035
0.0035 0.0035 |
0.0035
0.0035 0.0035 |
0.010
0.010 0.010 |
-
- - |
-
- - |
0.040
0.040 0.040 |
-
- - |
0.015
0.015 0.015 |
0.040
0.040 0.040 |
0.040
-
|
0.008
0.008 0.008 |
||||||
| ASTM
A-53 |
A B |
-
- |
0.025
0.030 |
-
- |
0.095
1.020 |
0.0050
0.0050 |
0.0045
0.0045 |
-
- |
-
- |
-
- |
0.040
0.040 |
-
- |
0.015
0.015 |
0.040 for S
0.040 for S |
0.040
0.040 |
0.008
0.008 |
||||||
| ASTM
A333 & A 334 |
1 6 |
- - |
0.030
0.030 |
0.040
0.029 |
1.006
1.006 |
0.0025
0.0025 |
0.0025
0.0025 |
-
0.010 |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
||||||
| SEAMLESS COLD DRAWN PRECISION STEEL TUBES FOR MECHANICAL APPLICATIONS/HYDRAULIC/PNEUMATIC POWER SYSTEMS | ||||||||||||||||||||||
| EN 10216-1 | P195 TR1 P235 TR1 |
0.013
0.016 |
0.07
1.02 |
0.0025
0.0025 |
0.002
0.002 |
0.035
0.035 |
0.03
0.03 |
0.008
0.008 |
0.03
0.03 |
0.03
0.03 |
||||||||||||
| EN 10305-1/
EN10305-4 |
E 235
E 355 |
0.017
0.022 |
1.02
1.06 |
0.0025
0.0025 |
0.0025
0.0025 |
|
0.035
0.055 |
0.002
0.002 |
||||||||||||||
| DIN 2391 | St - 45 St - 45 St - 52 |
- - - |
0.017
0.021 0.022 |
0.040
0.040 - |
-
- 1.060 |
0.0025
0.0025 0.0025 |
0.0025
0.0025 0.0025 |
-
- - |
0.035
0.035 0.055 |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
||||||
| EN 10216-2 | P235 GH | 0.016 | 1.02 | 0.0025 | 0.002 | 0.035 | 0.03 | 0.008 | 0.03 | 0.03 | 0.002 | |||||||||||
| BOILER/HEAT EXCHANGER/SUPERHEATER & CONDENSER TUBES | ||||||||||||||||||||||
| ASTM A179 | - | 0.006 | 0.018 | 0.027 | 0.063 | 0.0035 | 0.0035 | - | - | - | - | - | - | - | - | - | ||||||
| ASTM A192 | 0.006 | 0.018 | 0.027 | 0.063 | 0.0035 | 0.0035 | - | 0.025 | - | - | - | - | - | - | - | |||||||
| ASTM
A 210 |
A-1 C |
- - |
0.027
0.035 |
-
0.029 |
0.093
1.006 |
0.0035
0.0035 |
0.0035
0.0035 |
0.010
0.010 |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
||||||
| ASTM
A-519 |
SAE 1010 SAE 1018 SAE 1026 SAE 1035 SAE 1040 SAE 1518 SAE 1541 SAE 4130 |
0.008
0.015 0.022 0.032 0.037 0.015 0.036 0.028 |
0.013 0.020
0.028 0.038 0.044 0.021 0.044 0.033 |
0.030
0.060 0.060 0.060 0.060 1.010 1.035 0.040 |
0.060
0.090 0.090 0.090 0.090 1.040 1.065 0.060 |
0.0040
0.0040 0.0040 0.0040 0.0040 0.0040 0.0040 0.0040 |
0.0050
0.0050 0.0050 0.0050 0.0050 0.0050 0.0050 0.0040 |
-
- - - - - - 0.015 |
-
- - - - - - 0.035 |
-
- - - - - - 0.080 |
-
- - - - - - 1.010 |
-
- - - - - - 0.015 |
-
- - - - - - 0.025 |
-
- - - - - - - |
-
- - - - - - - |
-
- - - - - - - |
||||||
| ASTM
A 213 |
T-11 T-12 T-22 |
0.005
0.005 0.005 |
0.015
0.015 0.015 |
0.030
0.030 0.030 |
0.060
0.061 0.060 |
0.0025
0.0025 0.0025 |
0.0025
0.0025 0.0025 |
0.050
- - |
1.000
0.050 0.050 |
1.000
0.080 1.090 |
1.050
1.025 2.060 |
0.044
0.044 0.087 |
0.065
0.065 1.013 |
-
- - |
-
- - |
-
- - |
||||||
| BS 3059 Pt I | 320 | - | 0.016 | 0.030 | 0.070 | 0.0040 | 0.0040 | 0.010 | 0.035 | - | - | - | - | - | - | - | ||||||
| DIN 1629 | St- 37.00
St - 52 |
-
- |
0.017
0.022 |
-
- |
-
- |
0.0040
0.0040 |
0.0040
0.0035 |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
||||||
| ASTM A335 |
P-11 P-12 P-22 |
0.005
0.005 0.005 |
0.015
0.015 0.015 |
0.030
0.030 0.030 |
0.060
0.061 0.060 |
0.0025
0.0025 0.0025 |
0.0025
0.0025 0.0025 |
0.050
- - |
1.000
0.050 0.050 |
1.000
0.080 1.090 |
1.050
1.025 2.060 |
0.044
0.044 0.087 |
0.065
0.065 1.013 |
-
- - |
-
- - |
-
- - |
||||||
| BS 3059 Pt II | 622-490 | 0.008 | 0.015 | 0.040 | 0.070 | 0.0030 | 0.0030 | - | 0.050 | 2.000 | 2.050 | 0.090 | 1.020 | - | - | - | ||||||
| DIN 17175 | St - 35.08
St - 45.08 |
-
- |
0.017
0.021 |
0.040
0.040 |
0.080
1.020 |
0.0040
0.0040 |
0.0040
0.0040 |
0.010
0.010 |
0.035
0.035 |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
-
- |
||||||
| RAILWAYS | ||||||||||||||||||||||
| IS:1161 | YST-210
YST-240 YST-310 |
-
- - |
0.012
0.016 0.025 |
-
- - |
0.060
1.020 1.030 |
0.0040
0.0040 0.0040 |
0.0040
0.0040 0.0040 |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
-
- - |
||||||
| IS:1239 Pt I | - | - | - | - | - | 0.0050 | 0.0050 | - | - | - | - | - | - | - | - | - | ||||||
British Standard of Coated Carbon Steel Pipe
| Standard | Grade | Types |
| BS 3059 | 410, 360, 460, 440, 490 | for Heat Exchangers and Boiler Seamless Steel Tubes |
| BS 970 | Carbon Steel | for Machine Structure Seamless Steel Tubes |
Standard |
Grade | |
| for High Temperature Service Seamless Carbon Steel Pipe | ASTM A106 | Gr.C, Gr.B |
| Hot-Dipped Zinc-Coated and Black Seamless Steel Pipes | ASTM A53 | Gr.B, Gr.A, Gr.C |
| for High Pressure Seamless Carbon Steel Boiler Tubes | ASTM A192 | Low Carbon Steel |
| Carbon Steel Feedwater Heater Tubes Seamless Cold-Drawn | ASTM A556 | B2, A2 |
| Condenser and Heat-Exchanger Tubes Seamless Cold-Drawn Low-Carbon Steel | ASTM A179 | Low Carbon Steel |
| Superheater and Boiler Tubes Seamless Medium-Carbon Steel | ASTM A210 | C, A1 |
| Heat-Exchanger and Condenser Tubes for Seamless Cold-Drawn Intermediate Alloy Steel | ASTM A199 | T22, T5 |
| for Mechanical Tubing Seamless Alloy and Carbon Steel | ASTM A333 | Gr.3, Gr.1, Gr.6 |
| Seamless Austenitic and Ferritic Alloy Steel Superheater, Boiler and Heat-Exchanger Tubes | ASTM A213 | T5, T11, T9, T22, T12, T91 |
| for Low Temperature Use Welded and Seamless Alloy Steel and Carbon Steel Pipes | ASTM A334 | Gr.6, Gr.1 |
| ASTM | JIS G 3454 | ASME | BS | DIN | NK | ABS | ISO | LRS | DNV |
| A53 A | STPG 370 | SA53 A | 3601 320 | 1626 ust37.00 | KSTPG 38 | ABS 2 | 2604 II TW4 | Sec 2 320 | Sec 4-B-TS360 |
| 2604 III TS4 | Sec 2 360 | ||||||||
| A135 A | SA135 A | 3601 360 | 1626 st37.00 | ABS 8 | 2604 II TS5 | Sec 3 320 | Sec 4-B-TW360 | ||
| 2604 III TW5 | Sec 3 360 | ||||||||
| 1629 st37.00 | 2604 II TS6 | ||||||||
| 2604 III TW6 | |||||||||
| A53 B | STPG 410 | SA53 B | 3601 430 | 1626 st44.00 | KSTPG 42 | ABS 3 | 2604 II TS9 | Sec 2 410 | Sec 4-B-TS410 |
| 2604 III TW9 | Sec 4-B-TW410 | ||||||||
| A135 B | SA135 B | 1629 st44.00 | ABS 9 | 2604 II TS10 | Sec 3 410 | Sec 4-B-TS430 | |||
| 2604 III TW10 | Sec 4-B-TW430 | ||||||||
| 1626 st52.00 | 2604 II TS13 | Sec 2 460 | Sec 4-B-TS500 | ||||||
| 2604 III TW13 | Sec 4-B-TW500 | ||||||||
| 1629 st52.00 | 2604 II TS14 | Sec 2 490 | |||||||
| 2604 III TW14 | Sec 3 460 |
