ASTM A815 2205 Duplex Stainless Steel Buttweld Fittings Manufacturer in india
Duplex 2205 Pipe Fittings
Duplex S31803 Stainless Steel Buttweld Fittings
Duplex UNS S32205 Forged Fittings
2205 Duplex Stainless Steel Seamless Fittings
ASTM A815 Duplex Steel Welded Pipe Fittings
WERKSTOFF NR. 1.4462 Socket Weld Fittings
Duplex 2205 Fittings Suppliers in Mumbai, Call for small piece of Duplex UNS S32205 Elbow/Tee/Reducer to test before buying
A fitting is used to change the direction of the pipe. The simplest way to do it is to bend the pipe. However, it will stretch and thin out the outer walls of the pipe. It will also thicken the inner wall of the pipe. 2205 duplex stainless steel fittings are renowned for having austenitic and ferritic microstructures. They display the properties of both classes. Improved localized corrosion resistance is displayed by ASME SA815 Duplex Steel Butt Weld Pipe Fittings when compared to 316 and 317 grades.
Ordinary steel fittings are sensitive to chloride stress corrosion cracking. However, ASME SA815 Duplex Pipe Reducers are better as they restrain deformities and avoid corrosion cracking even under high temperatures. UNS S31803 Duplex Steel Tee is said to have amazing toxic resistance and elasticity due to which they are used in the gas desulfurization industry. WERKSTOFF NR. 1.4462 End Cap have high resistance to intergranular corrosion and are therefore used in terminating connections.
Duplex S31803 Stainless Steel Buttweld Fittings are used in desalination, Boiler manufacturers, and brewing tanks. They are usually lower in cost and have a lower percentage of alloying elements. They are available in ASTM A 815. A812, and ASME SA 815, SA 812 specifications. We at Victor Steel provide Duplex 2205 Pipe Fittings as per the specific requirements of our customers in various sizes and with different pressure ratings. Customer satisfaction is our top priority. Also, we are one of the few manufacturers in India that can weld, form, and bend these duplex stainless steel fittings in different sizes and shapes.
Table Of Content
Readily Available ASME SA815 UNS S31803 Long Radius Elbow stock for immediate Dispatch, Always check weight before buying Duplex Steel Tee
| Specifications Standard | ASTM A815 /ASME SA815 |
|---|---|
| Duplex 2205 Pipe Fittings Size Range | Welded Fittings: 1/2″ – 48″
Seamless Fittings: 1/2″ – 10″ |
| Connection | Welding |
| Type | DN15 to DN1200 |
| Origin & Mills | Indian, European, Korean, Japanese, Ukraine, USA, Russian |
| Radius of bending | R=3D, 1D, 8D, 10D, 5D, 2D, Custom MSS Sp-43, 6D |
| Duplex 2205 Pipe Fittings Manufacturing process | Forge, Press, Cast, Push etc. |
| Thickness | SCH10, SCH40, XS, SCH30, SCH 160, SCH 80, SCH 140, SCH60, SCH20, STD , SCH 120, SCH 100, XXS |
| Pressure Ratings | 2000#, 150#, 6000#, 3000#, 9000# |
| Export to | Abu Dhabi , Gimhae-si, Pimpri-Chinchwad,Montreal, Ankara, Ludhiana, Rajkot, Damilimeteram, Santiago, Noida, Karachi, Gujarat, Janeiro, Melbourne, Surat, Kuwait, Tau, Manama, Hyderabad, Ernakulam, Thiruvananthapuram, Ranchi, Nagpur, Gurgaon, Riyadh, Howrah, Baroda, Indore, Chennai, Bogota, Mexico, Bangalore, Ahvaz, Kanpur, Vadodara, Tehran, Perth, London, Khobar, Lagos, Sydney, India, Mumbai, Kolkata, Istanbul, Caracas, Muscat, Coimbatore, Jamshedpur, Courbevoie, Calgary, Bengaluru, Ahmedabad, New Delhi, Port-of-Spain |
| End Connections: |
socket weld and Threaded |
| Duplex 2205 Pipe Fittings manufacturer | 90º Tee, Elbows, Pipe Cap, Stub End, 45º Elbows, Crosses, Pipe Bend, Reducers |
| Dimensions | ASME B16.28, BS4504, MSS-SP-43, ASME/ANSI B16.9, BS1560, BS4504, BS10 |
| Elbows | Angle : 2.0D, 1.5D, 5D, 3D, 1.0D, 6D, 4D, 2.5D, 7D-40D . Standard: JISB2312, MSS SP-75, 22.5 deg, JISB2313, 30deg, ASME B16.9, 180 deg, 45 deg, JISB2311 BS, DIN2605, 90 deg, GB ISO |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate Third Party Inspection Report, etc |
ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content. It protects them from corrosion. These pipes tend to become brittle at a temperature exceeding 300 degrees C. Duplex UNS S32205 Pipe Elbow displays a tensile strength of 1,16,000 psi 800 MPa and yield strength of 80,000 psi 550 MPa.
| Description | Duplex 2205 Pipe Fittings Price in india |
|---|---|
| 45 Degree Duplex 2205 Stainless Steel Elbow Pipe Fitting |
US $ 1 / Piece |
| Stainless Steel Duplex 2205 Bw Pipe Fittings Elbow | US $ 1.2 / Piece |
| Duplex 2205 Uns31803 Eccentric Concentric Reducer | US $ 1 / Piece |
| ANSI Forged Pipe Fittings Uns31803 A182f51 2205 Duplex Stainless Steel Threadolet |
US $ 1 / Piece |
| Duplex 2205 Bw Pipe Fittings Elbow | US $ 2.5-50 / Piece |
| 2205 Duplex Stainless Steel Equal Tee |
US $ 1 / Piece |
| Duplex Stainless Steel 2205 Stub End |
US $ 1-15 / Piece |
| 90d Saf2205 Duplex 2205 Seamless Stainless Steel Dn50 Elbow | US $ 1 / Piece |
| Lr Sr ASME B16.9 Factory-Made Duplex Stainless Steel 2205 S31803 90 Degree Elbow | US $ 1 / Piece |
| S31803 (2205, 00Cr22Ni5Mo3) Pipe Elbows | US $ 0.5 / Piece |
In the event that it's not all that much difficulty, note This is an expected Price of Duplex 2205 Pipe Elbow in India. Mercifully don't stop for a second to connect with us latest 2205 Duplex Stainless Steel Fittings Price in India. Furthermore compare our Price and other ASTM A815 Duplex 2205 Pipe Fittings Suppliers in India and China.
Duplex 2205 Pipe Fittings Pressure Rating (psig) |
||||||||||||
NPS (inch) |
OD (inch) |
Pipe Schedule |
Wall Thick. (in) |
Temperature |
||||||||
200 Fitting |
100 Fitting |
400 Fitting |
300 Fitting |
500 Fitting |
||||||||
Allowable Stress (Pressure Rating) |
||||||||||||
16700 |
16700 |
15500 |
16700 |
14400 |
||||||||
| 1 1/2" | 1.0900 | 40 | 0.0145 | 1629 | 1629 | 1512 | 1629 | 1404 | ||||
| 1.0900 | 80 | 0.0200 | 2303 | 2303 | 2138 | 2303 | 1986 | |||||
| 1.0900 | 160 | 0.0281 | 3362 | 3362 | 3120 | 3362 | 2899 | |||||
| 2" | 2.0375 | 40 | 0.0154 | 1371 | 1371 | 1272 | 1371 | 1182 | ||||
| 2.0375 | 80 | 0.0218 | 1985 | 1985 | 1843 | 1985 | 1712 | |||||
| 2.0375 | 160 | 0.0344 | 3283 | 3283 | 3047 | 3283 | 2831 | |||||
| 3" | 3.0500 | 40 | 0.0216 | 1301 | 1301 | 1208 | 1301 | 1122 | ||||
| 3.0500 | 80 | 0.0300 | 1844 | 1844 | 1712 | 1844 | 1590 | |||||
| 3.0500 | 160 | 0.0438 | 2787 | 2787 | 2587 | 2787 | 2403 | |||||
| 4" | 4.0500 | 40 | 0.0237 | 1102 | 1102 | 1023 | 1102 | 950 | ||||
| 4.0500 | 80 | 0.0337 | 1596 | 1596 | 1482 | 1596 | 1377 | |||||
| 4.0500 | 160 | 0.0531 | 2611 | 2611 | 2424 | 2611 | 2552 | |||||
| 5" | 5.0563 | 40 | 0.0258 | 965 | 965 | 896 | 965 | 832 | ||||
| 5.0563 | 80 | 0.0375 | 1428 | 1428 | 1325 | 1428 | 1231 | |||||
| 5.0563 | 160 | 0.0625 | 2474 | 2474 | 2296 | 2474 | 2133 | |||||
| 6" | 6.0625 | 40 | 0.0280 | 877 | 877 | 814 | 877 | 756 | ||||
| 6.0625 | 80 | 0.0432 | 1379 | 1379 | 1280 | 1379 | 1189 | |||||
| 6.0625 | 160 | 0.0719 | 2382 | 2382 | 2211 | 2382 | 2054 | |||||
| 8" | 8.0625 | 40 | 0.0322 | 771 | 771 | 716 | 771 | 665 | ||||
| 8.0625 | 80 | 0.0500 | 1218 | 1218 | 1131 | 1218 | 1050 | |||||
| 8.0625 | 160 | 0.0906 | 2298 | 2298 | 2133 | 2298 | 1982 | |||||
| 10" | 10.0750 | 40 | 0.0365 | 699 | 699 | 649 | 699 | 603 | ||||
| 10.0750 | 80 | 0.0594 | 1159 | 1159 | 1075 | 1159 | 999 | |||||
| 10.0750 | 160 | 1.0125 | 2289 | 2289 | 2124 | 2289 | 1974 | |||||
100% Radiography Tested Welded and Seamless Duplex 2205 Pipe Fittings
| Products | Size | |
Sizes 1/2″ – 48″ |
||
| Duplex Elbows – Short Radius | Duplex Crosses | |
| Duplex Elbows – Long Radius | Duplex Stub Ends | |
| Duplex 45° Elbows | Duplex 180° LR Return Bends | |
| Duplex Reducing Elbows | Duplex Reducing Crosses | |
| Duplex Fabricated Tees | Duplex Pipe Bends / Piggable Bends | |
| Duplex Tees | Duplex 180° SR Return Bends | |
| Duplex Concentric Reducers | Duplex Pipe Nipples | |
| Duplex Reducers | Duplex Couplings | |
| Duplex 3D Elbow | Duplex End Caps | |
| Duplex Eccentric Reducers | Duplex Forged/Plate Cut Rings | |
| Duplex 5D Elbow | Duplex Forged / Plate Circles | |
Duplex Threaded and Socket Weld Pipe Fittings
| Products | Size | |
Sizes 1/8″ – 4″ Pressure Ratings – |
||
| 45° Elbows | Reducers | |
| 90° Elbows | Couplings | |
| Tees | Caps | |
| Street Elbows | Inserts | |
| Crosses | Unions | |
View latest price & ready sizes of ASME B16.9 Duplex Stainless Steel Seamless Fittings Ex Mumbai
| NOMINAL PIPE SIZE | ALL FITTINGS | ALL FITTINGS | 180 DEG RETURN BENDS | REDUCERS | ELBOWS AND TEES | 180 DEG RETURN BENDS | CAPS |
|---|---|---|---|---|---|---|---|
| NPS | ID at End (1), (3), (4) |
OD at Bevel (1), (2) | Centre-to- Centre O | Overall Length H | Centre -to- End Dimension A, B, C, M | Alignment of Ends U | Overall Length E |
| ½ to 2½ | 0.003 | 0.006 -0.003 |
0.025 | 0.006 | 0.006 | 0.003 | 0.012 |
| 3 to 3 ½ | 0.006 | 0.006 | 0.025 | 0.006 | 0.006 | 0.003 | 0.012 |
| 4 | 0.006 | 0.006 | 0.025 | 0.006 | 0.006 | 0.003 | 0.012 |
| 5 to 8 | 0.006 | 0.009 -0.006 |
0.025 | 0.006 | 0.006 | 0.003 | 0.025 |
| 10 to 18 | 0.012 | 0.016 -0.012 |
0.038 | 0.009 | 0.009 | 0.006 | 0.025 |
| 20 to 24 | 0.019 | 0.025 -0.019 |
0.038 | 0.009 | 0.009 | 0.006 | 0.025 |
| 26 to 30 | 0.019 | 0.025 -0.019 |
… | 0.019 | 0.012 | … | 0.038 |
| 32 to 48 | 0.019 | 0.025 -0.019 |
… | 0.019 | 0.019 | … |
| Duplex Steel S31803 Seamless Pipe Fittings | Duplex Steel S32205 Welded Pipe Fittings |
| Duplex Steel Pipe Fittings | Duplex Steel 2205 Buttweld Pipe Fittings |
| Duplex Steel UNS S31803 Pipe Elbow | Duplex Steel Buttweld Tee |
| ASTM A815 Duplex Steel Welded Pipe Fittings | ASME SA815 Duplex Pipe Fittings |
| Duplex Butt weld Fittings | 2205 Duplex Steel Pipe End Cap |
| Duplex Stainless Stubends | Ferritic / Austenitic Duplex Pipe Fittings E |
| Duplex Steel DIN 1.4462 Pipe Tee | Duplex Steel 2205 Cross |
| 2205 Duplex Buttweld Reducer | ANSI Duplex Steel Pipe Fittings |
| Duplex Steel UNS S32205 45deg.Elbow | Duplex Steel 90deg. LR Elbow |
| ANSI B16.9 Duplex Buttweld Fitting | 2205 Duplex End Pipe Cap |
| Duplex Steel 2205 Buttweld Reducing Nipple | Duplex Steel Short Radius Elbow |
Nominal Pipe Size |
45° Elbow |
90° Elbow |
OD |
180° Returns |
||||
(inch.) |
LR |
SR |
LR |
LR |
||||
Radius (inch.) |
Center to Face (inch.) |
Center to Face (inch.0) |
Center to Face (inch.0) |
(inch) |
(millimeter) |
Back to face (inch.) |
Center to Center (inch.) |
|
1/2 |
5/8 |
– |
1 1/2 |
0.0840 |
21.03 |
1 7/8 |
2 |
|
3/4 |
7/16 |
– |
1 1/8 |
1.0050 |
26.07 |
1 11/16 |
2 1/4 |
|
1 |
7/8 |
1 |
1 1/2 |
1.0315 |
33.04 |
2 3/16 |
3 |
|
1 1/4 |
1 |
1 1/4 |
1 7/8 |
1.0660 |
42.02 |
2 3/4 |
3 3/4 |
|
1 1/2 |
3 |
1 1/8 |
1 1/2 |
2 1/4 |
1.0900 |
48.03 |
3 1/4 |
4 1/2 |
2 |
4 |
1 3/8 |
2 |
3 |
2.0375 |
60.03 |
4 3/16 |
6 |
2 1/2 |
5 |
1 3/4 |
2 1/2 |
3 3/4 |
2.0875 |
73.00 |
5 3/16 |
7 1/2 |
3 |
6 |
2 |
3 |
4 1/2 |
3.0500 |
88.09 |
6 1/4 |
9 |
3 1/2 |
7 |
2 1/4 |
3 1/2 |
5 1/4 |
4.0000 |
101.06 |
7 1/4 |
10 1/2 |
4 |
8 |
2 1/2 |
4 |
6 |
4.0500 |
114.03 |
8 1/4 |
12 |
5 |
10 |
3 1/8 |
5 |
7 1/2 |
5.0563 |
141.03 |
10 5/16 |
15 |
6 |
12 |
3 3/4 |
6 |
9 |
6.0625 |
168.03 |
12 5/16 |
18 |
8 |
12 |
5 |
8 |
12 |
8.0625 |
219.01 |
16 5/16 |
24 |
10 |
15 |
6 1/4 |
10 |
15 |
10.0750 |
273.01 |
20 3/8 |
30 |
12 |
18 |
7 1/2 |
12 |
18 |
12.0750 |
323.09 |
24 3/8 |
36 |
| NPS | Outside diameter D |
45° Long Rad Center to End B |
90° Long Rad Center to End A |
45° 3D Center to End B |
90° 3D Center to End A |
| 1/2 | 21.03 | 16 | 38 | ||
| 3/4 | 26.07 | 19 | 38 | 24 | 57 |
| 1 | 33.04 | 22 | 38 | 31 | 76 |
| 1¼ | 42.02 | 25 | 48 | 39 | 95 |
| 1½ | 48.03 | 29 | 57 | 47 | 114 |
| 2 | 60.03 | 35 | 76 | 63 | 152 |
| 2½ | 73 | 44 | 95 | 79 | 190 |
| 3 | 88.09 | 51 | 114 | 95 | 229 |
| 3½ | 101.06 | 57 | 133 | 111 | 267 |
| 4 | 114.03 | 64 | 152 | 127 | 305 |
| 5 | 141.03 | 79 | 190 | 157 | 381 |
| 6 | 168.03 | 95 | 229 | 189 | 457 |
| 8 | 219.01 | 127 | 305 | 252 | 610 |
| 10 | 273 | 159 | 381 | 316 | 762 |
| 12 | 323.08 | 190 | 457 | 378 | 914 |
| 14 | 355.06 | 222 | 533 | 441 | 1067 |
| 16 | 406.04 | 254 | 610 | 505 | 1219 |
| NPS | O.D. D |
45° Long Rad Center to End B |
90° Long Rad Center to End A |
45° 3D Center to End B |
90° 3D Center to End A |
| 18 | 457 | 286 | 686 | 568 | 1372 |
| 20 | 508 | 318 | 762 | 632 | 1524 |
| 22 | 559 | 343 | 838 | 694 | 1676 |
| 24 | 610 | 381 | 914 | 757 | 1829 |
| 26 | 660 | 406 | 991 | 821 | 1981 |
| 28 | 711 | 438 | 1067 | 883 | 2134 |
| 30 | 762 | 470 | 1143 | 946 | 2286 |
| 32 | 813 | 502 | 1219 | DIN 1.4462 | 2438 |
| 34 | 864 | 533 | 1295 | 1073 | 2591 |
| 36 | 914 | 565 | 1372 | 1135 | 2743 |
| 38 | 965 | 600 | 1448 | 1200 | 2896 |
| 40 | 1016 | 632 | 1524 | 1264 | 3048 |
| 42 | 1067 | 660 | 1600 | 1326 | 3200 |
| 44 | 1118 | 695 | 1676 | 1389 | 3353 |
| 46 | 1168 | 727 | 1753 | 1453 | 3505 |
| 48 | 1219 | 759 | 1829 | 1516 | 3658 |
| NOMINAL PIPE SIZE | OUTSIDE DIAMETER | END TO END | |
|---|---|---|---|
| Inch | P | D | H |
| 3/4 x 1/2 | 21.03 | 26.07 | 38 |
| 3/4 x 3/8 | 17.01 | 26.07 | 38 |
| 1 x 3/4 | 26.07 | 33.04 | 51 |
| 1 x 1/2 | 21.03 | 33.04 | 51 |
| 1 1/4 x 1 | 33.04 | 42.02 | 51 |
| 1 1/4 x 3/4 | 26.07 | 42.02 | 51 |
| 1 1/4 x 1/2 | 21.03 | 42.02 | 51 |
| 1 1/2 x 1 1/2 | 42.02 | 48.03 | 64 |
| 1 1/2 x 1 | 33.04 | 48.03 | 64 |
| 1 1/2 x 3/4 | 26.07 | 48.03 | 64 |
| 1 1/2 x 1/2 | 21.03 | 48.03 | 64 |
| 2 x 1 1/2 | 48.02 | 60.03 | 76 |
| 2 x 1 1/4 | 42.02 | 60.03 | 76 |
| 2 x 1 | 33.04 | 60.03 | 76 |
| 2 x 3/4 | 26.07 | 60.03 | 76 |
| 2 1/2 x 2 | 60.03 | 73 | 89 |
| 2 1/2 x 1 1/2 | 48.03 | 73 | 89 |
| 2 1/2 x 1 1/4 | 42.02 | 73 | 89 |
| 2 1/2 x 1 | 33.04 | 73 | 89 |
| 3 x 2 1/2 | 73 | 88.09 | 89 |
| 3 x 2 | 60.03 | 88.09 | 89 |
| 3 x 1 1/2 | 48.03 | 88.09 | 89 |
| 3 x 1 1/4 | 42.02 | 88.09 | 89 |
| 3 1/2 x 3 | 88.09 | 101.06 | 102 |
| 3 1/2 x 21/2 | 73 | 101.06 | 102 |
| 3 1/2 x 2 | 60.03 | 101.06 | 102 |
| 3 1/2 x 1 1/2 | 48.03 | 101.06 | 102 |
| 3 1/2 x 1 1/4 | 42.02 | 101.06 | 102 |
| 4 x 3 1/2 | 101.06 | 114.03 | 102 |
| 4 x 3 | 88.09 | 114.03 | 102 |
| 4 x 2 1/2 | 73 | 114.03 | 102 |
| 4 x 2 | 60.03 | 114.03 | 102 |
| 4 x 1 1/2 | 48.03 | 114.03 | 102 |
| 5 x 4 | 114.03 | 141.03 | 127 |
| 5 x 3 1/2 | 101.06 | 141.03 | 127 |
| 5 x 3 | 88.09 | 141.03 | 127 |
| 5 x 2 1/2 | 73 | 141.03 | 127 |
| 5 x 2 | 60.03 | 141.03 | 127 |
| 6 x 5 | 141.03 | 168.03 | 140 |
| 6 x 4 | 114.03 | 168.03 | 140 |
| 6 x 3 1/2 | 101.06 | 168.03 | 140 |
| 6 x 3 | 88.09 | 168.03 | 140 |
| 6 x 2 1/2 | 73 | 168.03 | 140 |
| 8 x 6 | 168.03 | 219.01 | 152 |
| 8 x 5 | 141.03 | 219.01 | 152 |
| 8 x 4 | 114.03 | 219.01 | 152 |
| 8 x 3 1/2 | 101.06 | 219.01 | 152 |
| 10 x 8 | 219.01 | 273.01 | 178 |
| 10 x 6 | 168.01 | 273.01 | 178 |
| 10 x 5 | 141.03 | 273.01 | 178 |
| 10 x 4 | 114.03 | 273.01 | 178 |
| 12 x 10 | 273.01 | 323.09 | 203 |
| 12 x 8 | 219.01 | 323.09 | 203 |
| 12 x 6 | 168.03 | 323.09 | 203 |
| 12 x 5 | 141.03 | 323.09 | 203 |
| 14 x 12 | 323.09 | 355.06 | 330 |
| 14 x 10 | 273.01 | 355.06 | 330 |
| 14 x 8 | 219.01 | 355.06 | 330 |
| 14 x 6 | 168.03 | 355.06 | 330 |
| 16 x 14 | 355.06 | 406.04 | 356 |
| 16 x 12 | 323.09 | 406.04 | 356 |
| 16 x 10 | 273.01 | 406.04 | 356 |
| 16 x 8 | 219.01 | 406.04 | 356 |
| 16 x 6 | 168.03 | 406.04 | 356 |
| 18 x 16 | 406.04 | 457 | 381 |
| 18 x 14 | 355.06 | 457 | 381 |
| 18 x 12 | 323.09 | 457 | 381 |
| 18 x 10 | 273.01 | 457 | 381 |
| 18 x 8 | 219.01 | 457 | 381 |
| 20 x 18 | 457 | 508 | 508 |
| 20 x 16 | 406.04 | 508 | 508 |
| 20 x 14 | 355.06 | 508 | 508 |
| 20 x 12 | 323.09 | 508 | 508 |
| 20 x 10 | 273.01 | 508 | 508 |
| 20 x 8 | 219.01 | 508 | 508 |
| 22 x 20 | 508 | 559 | 508 |
| 22 x 18 | 457 | 559 | 508 |
| 22 x 16 | 406.04 | 559 | 508 |
| 22 x 14 | 355.06 | 559 | 508 |
| 22 x 12 | 323.09 | 559 | 508 |
| 24 x 10 | 273.01 | 559 | 508 |
| 24 x 22 | 559 | 610 | 508 |
| 24 x 20 | 508 | 610 | 508 |
| 24 x 18 | 457 | 610 | 508 |
| 24 x 16 | 406.04 | 610 | 508 |
| 24 x 14 | 355.06 | 610 | 508 |
| 24 x 12 | 323.09 | 610 | 508 |
| 24 x 10 | 273.01 | 610 | 508 |
Duplex Pipe Fittings Manufacturer, WERKSTOFF NR. 1.4462 End Cap can be manufactured as required with short lead times.
Manufacturing Standards of Duplex 2205 Pipe Fittings
| ASME B16.28 2205 Pipe Fittings | |
|---|---|
| ASME B16.9 Pipe Fittings | Wrought Buttwelding Fittings Factory-Made |
| Mss SP75 Pipe Fittings | |
| MSS SP43 2205 Pipe Fittings | for Low Pressure, Corrosion Resistant Applications Wrought and Fabricated Butt-Welding Fittings |
| BS3799 Pipe Fittings | Specification for crewed and Socket-welding and Steel pipe fitting for the petroleum industry |
| MSS SP95 Pipe Fittings | Bull Plugs and Swage(d) Nipples |
| ASME B16.11 2205 Pipe Fittings | Threaded and Socket Welding Forged Fittings |
| Outside Diameter at Bevel (D) |
+ 1.06 - 0.08 |
1.06 | 1.06 | + 2.04 - 1.06 |
| Nominal Pipe Size | 1/2 to 2½ | 3 to 3½ | 4 | 5 to 8 |
| Center to End LR (A/B) | 2 | 2 | 2 | 2 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameter at Bevel (D) |
+ 4 - 3.02 |
+ 6.04 - 4.08 |
+ 6.04 - 4.08 |
+ 6.04 - 4.08 |
| Inside Diameter at End | 3.02 | 4.08 | + 6.04 - 4.08 |
+ 6.04 - 4.08 |
| Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
| Center to End LR (A/B) | 2 | 2 | 3 | 5 |
| Inside Diameter at End | 0.08 | 1.06 | 1.06 | 1.06 |
| Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
| Wall Thickness (t) | Not less than 87.05% of Nominal Wall Thickness | |||
UNS S32205 Long Radius Elbow Mechanical Behaviour
| Grades | Density (lb/in 3) | Melting Point (°F) | Density (g/centimeter 3) | Melting Point (°C) |
| S31803 / S32205 Fittings | 0.285 | 2588 to 2669 | 7.805 | 1420 to 1465 |
Chemical Resistance Guide of WERKSTOFF NR. 1.4462 End Cap
| Grade | C | Mn | Si | N | P | Cr | Fe | Ni | S | Mo |
| S32205 Fittings | 0.030 maximum | 2.00 maximum | 1.00 maximum | 0.8 to 0.20 | 0.030 maximum | 21.0 to 23.0 | 63.54 minimum | 4.50 to 6.50 | 0.020 maximum | 2.50 to 3.50 |
| S31803 Fittings | 0.030 maximum | 2.00 maximum | 1.00 maximum | 0.14 to 0.20 | 0.030 maximum | 22.0 to 23.0 | 63.72 minimum | 4.50 to 6.50 | 0.020 maximum | 3.0 to 3.5 |
Equivalent grade of ASME SA815 Duplex Steel Butt Weld Pipe Fittings
| STANDARD | UNS | |
| 2205 Pipe Fittings | S31803 / S32205 |
Do you belong to following locations Please see what we supply here
| Chile, Philippines,iran, Canada | Uns S32205, Duplex 2205 Stainless Steel Pipe Fitting Elbow Tee Reducer |
| United Arab Emirates (UAE), Europe, Norway, Romania | 2205 Duplex Stainless Steel Pipe Fittings |
| Netherlands, Sweden, Russia, Malaysia | Duplex Steel S31803, S32205 Butt Weld Fittings |
| Egypt, Malaysia, Mexico, Los Alamos -Mexico | Duplex 2205 S31803/S32205 a/SA815, a/SA182 No. 1.4462 Butt Weld Fittings |
| United Kingdom -UK, Singapore, Malaysia, NY 12203 (USA) | ASME B16.9 2205 Bw duplex Steel Schedule 40 Steel Pipe Fittings |
| UK, Dammam -KSA, Poland, Philippines | 180 Degree Saf2205 Duplex Steel Pipe Fitting Elbow |
| Singapore, Qatar, Malaysia, Europe | Olet 3000lb DN25 1 Inch High Pressure 2205 Threadolet |
| Malaysia, Czechia, Japan,Thailand | Duplex Stainless Steel 31803 Lap Joint Stub End with Flanges |
| China, Malaysia, Colombia, Bangladesh | Duplex Steel Elbows, Tees, Reducers |
| Philippines, South Africa, Taiwan, Kuwait | Bw Fitting-Duplex Steel Reducer (A815 WPS31803,WPS32205) |
| Malaysia, Bahrain, South Korea, Singapore | Duplex Concentric Reducer |
| Belgium, Philippines, Indonesia, UK | Butt Weld Lr Seamless Duplex Stainless Steel Elbow |
| Thailand, Oman, France, Hong Kong | Duplex Butt Welded Pipe Fitting Sch60 Elbow 6 Inch |
| Turkey, Malaysia, Germany | ASTM A815 Duplex Stainless Steel Elbow, Butt Weld Pipe Fittings Elbow, Tee |
| Finland, Dubai, USA, Malaysia | Duplex Stainless Steel Butt Welded Reducing Tee/Ss 2205 31803 ANSI B16.9 |
| Brazil, UK, Saudi Arabia (KSA), Spain | Dn25 1 Inch Duplex Steel 2205 Threadolet |
| Singapore, UAE, South Africa, Europe | ASME ANSI16.9 Bw Sch40 90d Elbow duplex Pipe Elbow |
| Nigeria, Ellington -United States, Australia, Canada | S31803 / S32205 Duplex Steel Forged Threaded Fittings |
| UAE, Singapore, Malaysia, Italy | Pipe Fittings 45 Degree duplex Steel Welding Press Elbow |
