S700MC Steel Plate

EN 10149-2 S700MC High Yield Structural Steels Plates Suppliers in india at lowest Possible Price

 

Manufacturer of Strenx 700 MC Plates in different length or cut to size at distributor price

 

Steel plates can be made up of various grades of steel. These grades are divided as per their properties. S700MC Steel Plate is one such type of plate that has good weldability and bending properties. It is heat-treated using a tempering and quenching process. These s700mc plates are widely used in demanding load-bearing structures. It is a high-yield structural steel grade produced in compliance with EN 10149. The S700MC Steel Plate is available in 3350mm in width and 14630 in length. They are available in hot rolled structured steel that is made from cold forming.

 

EN 10149-2 S700MC steel plates have a guaranteed high yield strength that helps in reducing the weight through downgauging.  Therefore when weight reduction is required in the conventional structural steel grade these S700MC High Yield Steel plates are used. It is easy to weld these plates and this reduces transportation costs as well. When compared to standard steel grades the superior steel grades such as Strenx 700 MC Plates allow a significant improvement to wear resistance. Many a time these EN 10149-2 Grade S700MC Plates are economical and easier to process. 

 

EN 10149-2 S700MC High Yield Structural Steels Plates are ideally used in aerial platforms, telescopic handlers, truck trailers, and telescopic cranes. Emphasis is given on strength and weight reduction properties. 700 Heavy Steel Plates should be welded with welding energy of up to 1.5 kJ/cm per mm of thickness. This helps in preserving the mechanical properties of the base metal. If proper care of S700 MC Steel Plates is not taken then the heat affected zone may become soft. The extent of softening and the width of the soft zone depend on the heat applied during welding. Lower heat inputs are recommended in  S700 MC EN 10149-2 structural steel Plates when joint strength and toughness are prioritized. 

 

 

We have a huge stock of Grade S700MC High Yield Steel plate in specific thickness, Contact Victor Steel now

 

•  Grade : S700MC
•  Widths: 1250 milimeter & 1500 milimeter
•  Thickness:  4, 3, 5, 8, 6, 10,12 milimeter
•  Lengths: Up to 14 m
•  Classification: Steel
•  Number:1.8974
•  Standard: EN 10149-2: 1996

 

 

 

 

Know in detail about exact specification of S700 MC EN 10149-2 structural steel Plates with best price Ex Mumbai

 

 

 

• Cranes
• Automotive industry
• Farm machinery
• Truck chassis assemblies
• Earth moving machines

 

 

Are you searching your specific size and length in 700 Heavy Steel Plates? Check our stock with price list

 

 

 

 

 

 

 

 

• Testing
• Forming Drilling/ Machining
• Cutting
• Grinding

 

 

• Flaring Test
• Chemical Analysis – Spectro Analysis
• Pitting Resistance Test
• Flattening Test
• Micro and MacroTest
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Intergranular Corrosion (IGC) Test
• Positive Material Identification – PMI Testing

 

• Test Certificates (NACE MR0103, NACE MR0175)
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Heat Treatment Charts
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• FGeneralized System of Preferences (GSP)
• Certificate of Origin (by Chamber of Commerce or Embassy)
• Fumigation Certificates
• Commercial Invoice (with HS Code)
• Raw Material Test Reports
• Packing List (number of boxes, net weight and gross weight, Marks and Numbers)
• Material Test Certificates (accord. to EN 10204 3.1 and EN 10204 3.2)