BS EN 10225 Grade S355G2+N Offshore Platform Steel Plate Suppliers in india, view Price
S355G2+N Plate
En 10225 S355G2+N Steel Plate
S355G2+N Mild Steel Plate
S355g2+N Structural Steel Plate
S355G2+N Offshore Platform Steel Plate
S355G2+N Offshore Structural Steel Plates
Keep S355G2+N Structural Steel Plates Ready Stock for immediate Dispatch
They are available in 3mm to 300mm thickness and in 300mm to 18000mm length. En 10225 S355G2+N Steel Plates are put through tests such as flux cored arc welding (FCAW) and submerged arc welding (SAW). this helps in understanding the cold cracking sensitivity and hardenability.
As per the European specification for weldable structure EN 10225 Grade S355G2+N Offshore Platform Steel Plate used in these offshore structures should not be more than 150mm in thickness. This standard also defines sections up to 63mm thickness with an exception of those BS en10225 S355g2+N that are in a rolled condition which is permitted up to a thickness of 25mm only. The allowed thickness of seamless hollow section is up to 40mm and that of high-frequency electric resistance weld S355g2+N Mild Steel Plate up to 20mm.
S355G2+N Offshore Structural Steel Plates are designed to be used in the offshore sector. However not in steel supplied for fabricating subsea pipeline, process equipment, and risers. In the case of a hollow section formed by the S355g2+N Structural Steel Plate with seam fusion-welded this standard covers only the requirements of the material and is primarily applicable in the north sea sector. S355G2+N Offshore Platform Steel Plates are primarily used to construct various offshore platforms that are used to drill oil from the sea bed.
We stock and supplies S355g2+N Mild Steel Plate form up to 300mm thickness or as per client requirement
The S355G2 is high-yield non-alloy steel. It is used to make offshore platforms. This grade is also used to make S355G2+N Steel Plates that are used in offshore platforms. They are widely used for welded construction on these offshore platforms in critical sections. S355G2+N Plates are used in tubular joints, intersections, and stiffened plate construction.
- Thickness: 6mm-300mm
- Rolling Type: offshore and Oil platform steel plate
- Standard: EN 10225
- Treatment Heat : Normalized
- Density: 7.085 g/centimeter ³
- Length: 3000mm-18000mm
- Number: 1.8801
- Grade : S355G2
- Width: 1500mm-4200mm
- Standard: EN 10225: 2009
- Classification: Alloy quality steel
Description |
Price |
| 6mm thick S355G2+N plate |
US$ 618.00-US$ 760.00 / Ton |
| carbon mild S355G2+N Hot cold rolled plate |
US$ 300.00-US$ 420.00 / Ton |
| Grade S355G2+N Carbon Shipbuilding Plate | US$ 520.00-US$ 610.00 / Metric Ton |
| 20 mm thick size 4x8 S355G2+N standard plate |
US$ 630.00-US$ 890.00 / Ton |
| S355G2+N MS Carbon Plate | US$ 670.00-US$ 680.00 / Ton |
Buy S355g2+N Structural Steel Plate in specific size, surface finish and thickness online and save cost
Si |
C |
P |
Mn |
S |
Mo |
Cr |
0.050 |
0.020 |
0.0035 |
0.090 to1.065 |
0.0030 |
0.010 |
0.030 |
Alt min.0 |
Ni |
N |
Cu |
Nb |
V |
Ti |
0.0020 |
0.050 |
0.0015 |
0.035 |
0.0060 |
0.012 |
0.0030 |
| Rm - Tensile strength (MPa) (+N) | 470 to 630 |
| Nominal thickness (mm): | to 16 | 16 to 25 |
| ReH - Minimum yield strength (MPa) (+N) | 355 | 345 |
| KV - Impact energy (J) (+N) | -20° 50 |
| A - Min. elongation Lo = 5,65 √ So (%) (+N) | 22 |
Warning! Only for reference
| EU EN |
England BS |
|
| S355G2 |
|
Standard |
Grade |
Maximum Thickness (mm) |
Minimum Thickness (mm) |
EN10025 - 3 |
S355 NL |
200 |
6 |
EN10025 - 3 |
S460 NL |
80 |
6 |
EN10025 - 4 |
S355 ML |
100 |
10 |
Dillinger |
DI-MC TMCP Plates |
100 |
10 |
Dillinger |
Dillimax 690T |
200 |
6 |
EN10025 - 6 |
S690QL |
200 |
6 |
Dillinger |
Dillimax 890 T |
100 |
6 |
EN10025 - 6 |
S890QL |
100 |
6 |
En 10225 S355G2+N Steel Plate stock are produced as per international standards
- Ultrasonic test under ASTM A435, EN 10160, A578, A577
- Low temperature impacting test
- Z TEST (Z15, Z35, Z25 )
- Shot blasting and Painting,Cutting and welding as per end user’s demand
- under EN 10204 FORMAT 3.1/3.2 Issued Orginal Mill test certificate
| Maximum thickness (mm) | Minimum thickness (mm) |
| 20 | 5 |
| 40 | |
| 20 | |
| 40 | |
| 80 | |
| 50 | |
| 80 | |
| 50 | |
| 80 | |
| 50 | |
| 80 | |
| 50 | |
| 30 |
| Carbon Steel Gauge Width and Length | Estimated Weight per Sheet | Weight Lbs. per Sq. Ft. |
|---|---|---|
| 10 ga.0 (.0135") x 48 x 120 | 226.08 | 5.0670 |
| 7 ga.0 (.01874") x 48 x 120 | 314.08 | 7.0871 |
| 11 ga.0 (.0120") x 48 x 96 | 161.03 | 5.0040 |
| 11 ga.0 (.0120") x 36 x 120 | 151.02 | 5.0040 |
| 11 ga.0 (.0120") x 48 x 144 | 241.09 | 5.0040 |
| 11 ga.0 (.0120") x 48 x 120 | 201.06 | 5.0040 |
| 12 ga.0 (.0105") x 36 x 120 | 132.03 | 4.0410 |
| 11 ga.0 (.0120") x 60 x 96 | 252.00 | 5.0040 |
| 12 ga.0 (.0105") x 60 x 120 | 220.05 | 4.0410 |
| 12 ga.0 (.0105") x 48 x 120 | 176.04 | 4.0410 |
| 14 ga.0 (.0075") x 48 x 120 | 126.00 | 3.0150 |
| 14 ga.0 (.0075") x 36 x 120 | 94.050 | 3.0150 |
| 16 ga.0 (.0060") x 48 x 96 | 80.064 | 2.0520 |
| 16 ga.0 (.0060") x 36 x 120 | 75.060 | 2.0520 |
| 16 ga.0 (.0060") x 60 x 120 | 126.00 | 2.0520 |
| 16 ga.0 (.0060") x 48 x 120 | 100.08 | 2.0520 |
| 18 ga.0 (.0048") x 48 x 120 | 80.064 | 2.0016 |
| 18 ga.0 (.0048") x 36 x 120 | 60.048 | 2.0016 |
| 20 ga.0 (.0036") x 48 x 120 | 60.048 | 1.0512 |
| 20 ga.0 (.0036") x 36 x 120 | 45.036 | 1.0512 |
| 22 ga.0 (.0030") x 48 x 96 | 40.032 | 1.0260 |
| 22 ga.0 (.0030") x 36 x 120 | 37.080 | 1.0260 |
| 22 ga.0 (.0030") x 48 x 120 | 50.040 | 1.0260 |
| 24 ga.0 (.0024") x 48 x 120 | 40.032 | 1.0008 |
| 24 ga.0 (.0024") x 36 x 120 | 30.024 | 1.0008 |
| 26 ga.0 (.0018") x 48 x 120 | 30.024 | .07560 |
| 26 ga.0 (.0018") x 36 x 120 | 22.068 | .07560 |
| 28 ga.0 (.0015") x 36 x 120 | 18.090 | .06300 |
Type of analysis |
PCM (%) | |
Cast |
0.043 |
- |
Product |
0.043 |
0.024 |
Cast |
0.043 |
- |
Product |
0.043 |
0.024 |
Cast |
0.043 |
- |
Product |
(0.043) |
0.022 |
Cast |
0.043 |
- |
Product |
0.043 |
0.024 |
Product |
(0.041) |
0.021 |
Product |
(0.043) |
0.022 |
Product |
0.043 |
0.024 |
Product |
(0.041) |
0.021 |
Group |
BS 7191:1989 |
EN 10225:2009 |
API 2W |
1 |
355D |
S355G2+N | |
1 |
355E |
||
1 |
355D |
S355G5+M |
|
1 |
355E |
S355G6+M |
|
2 |
355EM |
S355G7+N |
|
2 |
355EM |
S355G7+M |
|
3 |
355EMZ |
S355G8+N |
|
3 |
355EMZ |
S355G8+M |
|
2 |
S355G9+N |
||
2 |
S355G9+M |
||
3 |
S355G10+N |
||
3 |
S355G10+M |
API 2W-50 |
|
 |
 |
 |
|
JSW Steel Ltd. |
POSCO |
Salzgitter AG |
Nippon Steel & Sumitomo Metal |
 |
 |
 |
 |
APERAM |
Essar Steel |
SSAB |
JFE Steel Corporation |
- mechanical manufacturing
- Structural application in freight cars, transmission towers, dump trucks, cranes, trailers
- ship building
- palm oil equipments and machineries
- construction,
- power plant
- oil and gas platforms
| Europe, United Arab Emirates (UAE), Romania, Norway | En 10225 S355G2+N Plates |
| Philippines, Chile, Canada, Iran | BS en10225 S355g2+N |
| Malaysia, Egypt, Los Alamos -Mexico | S355G2+N Plates |
| Sweden, Netherlands, Malaysia, Russia | S355g2+N Mild Plates |
| Dammam -KSA, UK, Philippines, Poland | S355g2+N Structural Plates |
| Singapore, United Kingdom -UK, NY 12203 (USA), Malaysia | S355G2+N Offshore Platform Plates |
| Czechia, Malaysia, Thailand, Japan | S355G2+N Offshore Structural Plates |
| Qatar, Singapore, Europe, Malaysia | EN 10225 Grade S355G2+N Offshore Platform Plates |
