Astm B161 Alloy 200 seamless pipe and tube Suppliers in india
Nickel 200 Pipe
Nickel 200 Tube
Nickel 200 Seamless Pipe
Alloy 200 welded pipe
Nickel 200 Seamless Tube
Nickel 200 Welded Tube
Nickel Tube Suppliers, buy directly from ASME SA161 UNS N02200 Welded Pipe and Tube manufacturer in India
A Variety of pipes made out of different metals and alloys are available in the market. The requirement varies from one industry to the other. If you are into an industry like oil drilling, marine equipment, heat exchanger, or pharma equipment manufacturing, that requires good strength and high corrosion resistance pipes then Nickel 200 pipes are ones you might be looking at. Nickel pipes also have a large variety.
Alloy UNS UN02200 round pipes are used in food processing along with the defense and aerospace industry. Whereas, alloy 200 hollow pipes are compatible with flowing seawater and high-velocity seawater. 200 alloy EFW pipes are usually prone to severe attacks by local organisms and are uses in the paper pulping industry.
Nickel has the property to resist corrosion even when exposed to high temperatures. Furthermore, Nickel is also a good conductor of electricity, has low vapor pressure, and low gas content. On the other hand, an alloy is a mixture of 2 metals. When nickel is mixed with other metals like copper it derives the property of nickel as well as copper, manganese, and iron. Nickel 200 pipes and alloy 200 pipes can be classified into Seamless, ERW, EFW, Welded, DOM, CDW, Fabricated, and so on.
These properties of nickel are inherited in the nickel 200 pipes. When Nickel is molded into Nickel 200 seamless pipes (UNS N02200) it possesses the quality of being corrosion resistant. But, they are still good conductors of electricity. It also possesses magnetic and mechanical properties. Nickel 200 pipes are available in various dimensions and shapes and can be cold drawn, hot drawn, bright annealed, hot extruding, and solid solution.
Specifications of nickel pipes are as follows
- Nickel 200 welded pipes: ASME SB725, SB730, and ASTM B725, B730,
- Nickel 200 seamless pipes: ASTM B161, B163, and ASME SB161, SB163
WERKSTOFF NR. 2.4066 Welded tubing can be molded as per required length into a square, oval, round, rectangle, hydraulic, etc. Ideally, the standard dimension of these UNS N02200 Welded Pipe and tubes are ANSI B36.19M and ANSI B36.10. The melting point of Nickel 200 pipes and tubes is 1446 °C (2635 °F) with a density of 8.9gm/cm3. It provides a tensile strength of 67000-psi, 462-MPa. It also provides a yield strength of 21500-psi, 148-MPa (o.2% offset).
Ni200 bush hex pipes can be used between a working temperature of 1200 degrees F to 2250 degrees F. A temperature of 1600 degrees F or above is maintained for hot forming followed by heavy forming of custom Nickel 200 pipes. To remove internal stress and make the metal tough ASME SB161 Nickel 200 Pipe requires a temperature between 1300 degrees F to 1600 degrees F. Annealing ASTM B161 nickel 200 Hollow Pipe requires the temperature to be monitored along with the time it is exposed to this temperature. These parameters influence the mechanical properties and structure of the ni200 bush hex pipe.
Table Of Content
Best Price & Fast Delivery of Ni200 Erw, Hollow and Bush Hex Pipe, check Nickel 200 pipe price
The ends of these Nickel 200 pipes and alloy 200 pipes can either be plain or beveled or it can even be treaded. Nickel 200 and Alloy 200 pipes are available approximately at Rs.2400 per kg in India and are the cheapest compared to other manufacturers. Manufacturers in the USA supply Nickel pipes at around Rs.3400 and Japan at around Rs.2800. Apart from those mentioned above we at Victor Steel provide a variety of nickel pipes and tubes like WERKSTOFF NR. 2.4066 Welded tubing, nickel 200 tube, Alloy 200 seamless pipe, nickel 200 seamless tubes, and many more at a cost affordable to you without compromising on the quality of it.
| Description | Nickel 200 pipe Price in india |
|---|---|
| Cold Rolled Nickel 200/Alloy 200 Nickel/Pipe with Polished Finish | US $ 2400-2600 / Ton |
| Pure Nickel Seamless Pipe | US $ 11.24-13.48 / kg |
| Nickel 200 Uns N02200 Corrosion Resistant Tube/Pipe | US $ 10 / Ton |
| Nickel 200 Pure Nickel Tube/Nickel Pipe | US $ 30-60 / kilograms |
| Nickel 200 Seamless Pipe Corrosion Resistant 4X0.3mm |
US $ 8-10 / Meter |
| Material Ni 200 Welded Nickel Tube/Pipe | US $ 8-10 / Meter |
| Polished 200 Nickel Tube/Pipe with Small Diameter | US $ 29-45 / kg |
| Pure Nickel Uns No2200 Tube Pipe for Heat Exchanger |
US $ 8-10 / Meter |
| Nickel Alloy Pipe Nickel 200 Tube | US $ 20 / KG |
| Nickel Alloy Welded Pipes |
US $ 1800-2300 / Ton |
In the event that it's not all that much difficulty, note This is an expected Price of Nickel 200 Pipe in India. Mercifully don't stop for a second to connect with us latest Alloy 200 Tube Price in India. Furthermore compare our Price and other ASME SB161 Nickel 200 Pipe Suppliers in India and China.
| ASTM Specification | UNS N02200/ ASTM B161 ASME SB161, ASME SB-163 |
|---|---|
| International Specification | BS 3073, BS 3072, Werkstoff Nr. 2.4060, BS 3075, BS 3074, BS 3076, NA11 DIN 17750, 17740, 17752, 17751,17754, 17753 |
| Standard | DIN, ASME, EN, JIS, GB, AISI, NF, DS, SAE, DTD, ASTM, AMS, TOCT, |
| Size of Seamless Pipe | Wall thickness.: 0.05- 20 milimeter, 4 - 219 milimeter |
| Size of Welded Pipe | 5.0 to 1219.02 milimeter |
| size of EFW Pipe | 5.0 to 1219.02 milimeter |
| Seamless Tube Size | 3.35 milimeter To 101.6 milimeter OD |
| Welded Tube Size | 6.35 milimeter To 152 milimeter OD |
| Bwg & Swg | 18 Swg., 14 20 Swg., Swg. Swg., 12 16 Swg., 10 Swg. |
| Tubing wall thickness | 0.020" –0.220", (custom wall thicknesses available) |
| Pipe Schedule | SCH160, SCH40S, SCH30, SCH120, SCH20, SCH80, SCH60, SCH5, SCH10S, SCH40, SCH80, XXS, XS, SCH10, STD, SCH140, |
| Length | Standard & Cut length , Single Random, Double Random Pipe |
| Finish | AP (Annealed & Pickled), BA (Bright & Annealed), NO.1, 2B, Polished, MF, HL, NO.4, Mirror finish, BA, 8K etc |
| End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Form | Hydraulic, Rectangular, Coiled, Square, Hollow, Round, Straight Pipes/tubes, “U” Shape, Pan Cake Coils, Boiler, LSAWetc. |
| Application | Dairy Pipe, Oil Pipe/tube, Gas Pipe/tube, Fluid Pipe/tube, Boiler Tube, Heat exchanger Tube |
| Type | Seamless /ERW/ EFW / Welded / Fabricated /CDW /DOM/CEW Nickel 200 Pipe |
| Marking | Heat No. (Or as per need.), Thickness, OD, Grade, Standard Length |
| Value Added Service | Expansion and Draw as per needed Length and Size, , Polish (Comilimeterercial and Electro), Machining, Annealed & Pickled Bending Etc. |
| Specialize in |
|
| Suppliers of |
|
| Test Certificate |
|
| manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Our stockyard | Pimpri-Chinchwad, New Delhi, Abu Dhabi,Tehran, Jamshedpur, Muscat, Gurgaon, Calgary, Ahvaz, India, Bogota, Karachi, Perth, Bangalore, Baroda, Kuwait, Ludhiana, Manama, London, Rajkot, Ahmedabad, Istanbul, Ankara, Khobar, Mexico, Kanpur, Chennai, Ranchi, Howrah, Bengaluru, Courbevoie, Montreal, Gujarat, Damilimeteram, Ernakulam, Noida, Thiruvananthapuram, Tau, Lagos, Santiago, Melbourne, Surat, Kolkata, Hyderabad, Riyadh, Coimbatore, Mumbai, Nagpur, Indore, Caracas, Janeiro, Vadodara, Sydney, Gimhae-si, Port-of-Spain, |
UNS N02200 ERW Tubing
| Nominal Thickness (in) MM |
Pipe Size (in) |
Transverse Areas (in2) MM2 |
Diameter (in) MM |
Volume (ft3/ft) |
Number of Threads per inch of Screw | Weight | Length of Pipe (ft per sq.0 foot of surface) |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Internal | External | Steel | Internal | External | (kg/m) | (lb/ft) | Internal Surface (ft) |
External Surface (ft) |
||||
| 0.007 | 1/8 | 0.006 | 0.013 | 0.007 | 0.027 | 0.0405 | 0.00004 | 27 | 0.036 | 0.024 | 14.020 | 9.043 |
| 0.009 | ¼ | 0.010 | 0.023 | 0.013 | 0.036 | 0.0540 | 0.00007 | 18 | 0.063 | 0.042 | 10.049 | 7.007 |
| 0.009 | 3/8 | 0.019 | 0.036 | 0.017 | 0.049 | 0.0675 | 0.00013 | 18 | 0.084 | 0.057 | 7.075 | 5.066 |
| 0.011 | ½ | 0.030 | 0.055 | 0.025 | 0.062 | 0.0840 | 0.00021 | 14 | 1.026 | 0.085 | 6.014 | 4.055 |
| 0.011 | ¾ | 0.053 | 0.087 | 0.033 | 0.082 | 1.0050 | 0.00037 | 14 | 1.068 | 1.013 | 4.064 | 3.064 |
| 0.013 | 1 | 0.086 | 1.036 | 0.049 | 1.005 | 1.0315 | 0.00060 | 11 ½ | 2.050 | 1.068 | 3.064 | 2.090 |
| 0.014 | 1 ¼ | 1.050 | 2.016 | 0.067 | 1.038 | 1.0660 | 0.00104 | 11 ½ | 3.038 | 2.027 | 2.077 | 2.030 |
| 0.015 | 1 ½ | 2.004 | 2.084 | 0.080 | 1.061 | 1.0900 | 0.00141 | 11 ½ | 4.004 | 2.072 | 2.037 | 2.001 |
| 0.015 | 2 | 3.036 | 4.043 | 1.008 | 2.007 | 2.0375 | 0.00233 | 11 ½ | 5.043 | 3.065 | 1.085 | 1.061 |
| 0.020 | 2 ½ | 4.079 | 6.049 | 1.070 | 2.047 | 2.0875 | 0.00333 | 8 | 8.062 | 5.079 | 1.055 | 1.033 |
| 0.022 | 3 | 7.039 | 9.062 | 2.023 | 3.007 | 3.0500 | 0.00513 | 8 | 11.027 | 7.058 | 1.025 | 1.009 |
| 0.023 | 3 ½ | 9.089 | 12.056 | 2.068 | 3.055 | 4.0000 | 0.00687 | 8 | 13.056 | 9.011 | 1.008 | 0.095 |
| 0.024 | 4 | 12.073 | 15.090 | 3.017 | 4.003 | 4.0500 | 0.00884 | 8 | 16.006 | 10.079 | 0.095 | 0.085 |
| 0.026 | 5 | 20.000 | 24.030 | 4.030 | 5.005 | 5.0563 | 0.01389 | 8 | 21.074 | 14.061 | 0.076 | 0.069 |
| 0.028 | 6 | 28.089 | 34.047 | 5.058 | 6.007 | 6.0625 | 0.02006 | 8 | 28.023 | 18.097 | 0.063 | 0.058 |
| 0.032 | 8 | 50.002 | 58.042 | 8.040 | 7.098 | 8.0625 | 0.03552 | 8 | 42.049 | 28.055 | 0.048 | 0.044 |
| 0.037 | 10 | 78.085 | 90.076 | 11.090 | 10.002 | 10.0750 | 0.05476 | 8 | 60.024 | 40.048 | 0.038 | 0.036 |
| 0.041 | 12 | 111.090 | 127.064 | 15.074 | 11.094 | 12.0750 | 0.07763 | 8 | 79.077 | 53.060 | 0.032 | 0.030 |
| 0.044 | 14 | 135.030 | 153.094 | 18.064 | 13.013 | 14.0000 | 0.09354 | 8 | 93.075 | 63.000 | 0.028 | 0.027 |
| 0.050 | 16 | 176.070 | 201.005 | 24.035 | 15.000 | 16.0000 | 1.02230 | 8 | 116.008 | 78.000 | 0.025 | 0.024 |
| 0.056 | 18 | 224.000 | 254.085 | 30.085 | 16.088 | 18.0000 | 1.05550 | 8 | 156.026 | 105.000 | 0.023 | 0.021 |
| 0.059 | 20 | 278.000 | 314.015 | 36.015 | 18.081 | 20.0000 | 1.09260 | 8 | 183.005 | 123.000 | 0.020 | 0.019 |
| 0.069 | 24 | 402.010 | 452.040 | 50.030 | 22.063 | 24.0000 | 2.07930 | 8 | 254.048 | 171.000 | 0.017 | 0.016 |
Pipe WT mm |
ASTM B161 Nickel 200 Pipe OD mm |
Sch |
in.0 |
Kg/m |
|---|---|---|---|---|
1.065 |
13.072 |
10S |
1/4 |
0.050 |
2.024 |
13.072 |
40S |
1/4 |
0.064 |
3.002 |
13.072 |
80S |
1/4 |
0.081 |
1.065 |
17.015 |
10S |
3/8 |
0.064 |
2.031 |
17.015 |
40S |
3/8 |
0.086 |
3.020 |
17.015 |
80S |
3/8 |
1.012 |
2.011 |
21.034 |
10S |
1/2 |
1.002 |
2.077 |
21.034 |
40S |
1/2 |
1.029 |
3.073 |
21.034 |
80S |
1/2 |
1.065 |
2.011 |
26.067 |
10S |
3/4 |
1.030 |
2.087 |
26.067 |
40S |
3/4 |
1.071 |
3.091 |
26.067 |
80S |
3/4 |
2.023 |
2.077 |
33.040 |
10S |
1 |
2.013 |
3.038 |
33.040 |
40S |
1 |
2.054 |
4.055 |
33.040 |
80S |
1 |
3.029 |
6.0352) |
33.040 |
160 |
1 |
4.030 |
2.077 |
42.016 |
10S |
1¼ |
2.073 |
3.056 |
42.016 |
40S |
1¼ |
3.044 |
4.085 |
42.016 |
80S |
1¼ |
4.053 |
6.0352) |
42.016 |
160 |
1¼ |
5.069 |
2.077 |
48.026 |
10S |
1½ |
3.016 |
3.068 |
48.026 |
40S |
1½ |
4.011 |
5.008 |
48.026 |
80S |
1½ |
5.049 |
2.077 |
60.033 |
10S |
2 |
3.099 |
3.091 |
60.033 |
40S |
2 |
5.052 |
5.054 |
60.033 |
80S |
2 |
7.060 |
8.0742) |
60.033 |
160 |
2 |
11.029 |
3.005 |
73.003 |
10S |
2½ |
5.035 |
5.016 |
73.003 |
40S |
2½ |
8.077 |
7.001 |
73.003 |
80S |
2½ |
11.059 |
3.005 |
88.090 |
10S |
3 |
6.056 |
5.049 |
88.090 |
40S |
3 |
11.047 |
7.062 |
88.090 |
80S |
3 |
15.051 |
11.0132) |
88.090 |
160 |
3 |
21.067 |
3.005 |
101.060 |
10S |
3½ |
7.053 |
5.074 |
101.060 |
40S |
3½ |
13.078 |
8.008 |
101.060 |
80S |
3½ |
18.092 |
3.005 |
114.030 |
10S |
4 |
8.050 |
6.002 |
114.030 |
40S |
4 |
16.032 |
8.056 |
114.030 |
80S |
4 |
22.067 |
13.0492) |
114.030 |
160 |
4 |
34.005 |
6.055 |
141.030 |
40S |
5 |
22.010 |
9.053 |
141.030 |
80S |
5 |
31.044 |
15.0882) |
141.030 |
160 |
5 |
49.087 |
3.04 |
168.028 |
10S |
6 |
14.004 |
7.011 |
168.028 |
40S |
6 |
28.069 |
10.097 |
168.028 |
80S |
6 |
43.021 |
14.027 |
168.028 |
120 |
6 |
54.075 |
18.0262) |
168.028 |
160 |
6 |
68.059 |
8.018 |
219.008 |
40S |
8 |
43.020 |
12.07 |
219.008 |
80S |
8 |
65.063 |
18.023 |
219.008 |
120 |
8 |
91.030 |
23.0012) |
219.008 |
160 |
8 |
112.097 |
OD = Nickel 200 Pipe outside diameter
WT = Nickel 200 Pipe wall thickness
Great Nickel 200 Pipe suppliers in Mumbai, India offer these Nickel Alloy 200 Tube and Tubing in different size range, from thin wall to thick wall in coils or straight lengths.
| DIMENSIONS | WEIGHT PER | WALL | DIMENSIONS | WEIGHT PER | WALL | |
|---|---|---|---|---|---|---|
| (MM) | METRE (KG) | (MM) | (MM) | METRE (KG) | (MM) | |
| 12.07 x 12.07 | 0.044 | 1.020 | 40 x40 | 1.049 | 1.020 | |
| 12.07 x 12.07 | 0.055 | 1.050 | 40 x40 | 1.085 | 1.050 | |
| 15 x 15 | 0.053 | 1.020 | 40 x40 | 2.045 | 2.000 | |
| 15 x 15 | 0.065 | 1.050 | 40 x40 | 3.075 | 3.000 | |
| 20 x 20 | 0.071 | 1.020 | 50 x50 | 2.032 | 1.050 | |
| 20 x 20 | 0.088 | 1.050 | 50 x50 | 3.008 | 2.000 | |
| 20 x 20 | 1.019 | 2.000 | 50 x50 | 4.065 | 3.000 | |
| 25 x 25 | 0.092 | 1.020 | 60 x60 | 3.071 | 2.000 | |
| 25 x 25 | 1.014 | 1.050 | 60 x60 | 5.049 | 3.000 | |
| 25 x 25 | 1.049 | 2.000 | 70 x70 | 6.053 | 3.000 | |
| 25 x 25 | 2.020 | 3.000 | 80 x80 | 4.098 | 2.000 | |
| 30 x 30 | 1.010 | 1.020 | 80 x80 | 7.053 | 3.000 | |
| 30 x 30 | 1.037 | 1.050 | 100 x 100 | 6.040 | 2.000 | |
| 30 x 30 | 1.084 | 2.000 | 100 x 100 | 9.053 | 3.000 | |
| 30 x 30 | 2.072 | 3.000 | ||||
| Regular Wall (RW) mm | Gauge | Extra Thin Wall (XTW) mm | Outside Diameter Tolerance mm | Ultra Thin Wall (UTW) mm | Thin Wall (TW) mm |
| 0.0064 to 0.0089 | 30 | 0.0304 to 0.0317 | |||
| 0.0064 to 0.0089 | 29 | o.0330 to 0.0342 | |||
| 0.0076 to 0.0102 | 28 | 0.0355 to 0.0368 | |||
| 0.0089 to 0.0115 | 27 | 0.0406 to 0.0419 | 0.0064 to 0.0089 | ||
| 0.0089 to 0.0114 | 26 | 0.0457 to 0.0469 | |||
| 0.0115 to 0.0140 | 25 | 0.0508 to 0.0520 | 0.0089 to 0.0114 | ||
| 0.0114 to 0.0140 | 24 | 0.0558 to 0.0571 | 0.0051 to 0.0102 | 0.0089 to 0.0114 | |
| 0.0140 to 0.0165 | 23 | 0.0635 to 0.0647 | 0.0051 to 0.0102 | 0.0089 to 0.0114 | |
| 0.0140 to 0.0165 | 22 | 0.0077 to 0.0102 | 0.0711 to 0.0723 | 0.0051 to 0.0102 | 0.0096 to 0.0121 |
| 0.0140 to 0.0165 | 21 | 0.0812 to 0.0825 | 0.0051 to 0.0102 | 0.0102 to 0.0127 | |
| 0.0108 to 0.0165 | 20 | 0.0901 to 0.0914 | 0.0108 to 0.0134 | ||
| 0.0166 to 0.0216 | 19 | 0.0070 to 0.0108 | 1.0054 to 1.0079 | 0.0102 to 0.0140 | |
| 0.0191 to 0.0241 | 18 | 0.0083 to 0.0121 | 1.0257 to 1.0282 | 0.0051 to 0.0102 | 0.0127 to 0.0165 |
| 0.0177 to 0.0229 | 17 | 0.0083 to 0.0127 | 1.0460 to 1.0485 | 0.0057 to 0.0102 | 0.0115 to 0.0152 |
| 0.0204 to 0.0254 | 16 | 0.0096 to 0.0133 | 1.0638 to 1.0663 | 0.0070 to 0.0121 | 0.0127 to 0.0165 |
| 0.0204 to 0.0254 | 15 | 0.0096 to 0.0134 | 1.0816 to 1.0841 | 0.0070 to 0.0121 | 0.0127 to 0.0165 |
| 0.0216 to 0.0292 | 14 | 0.0114 to 0.0165 | 2.0082 to 2.0133 | 0.0076 to 0.0134 | 0.0165 to 0.0229 |
| 0.0267 to 0.0343 | 13 | 2.0387 to 2.0438 | 0.0191 to 0.0267 | ||
| 0.0267 to 0.0321 | 12 | 2.0743 to 2.0749 | |||
| 0.0293 to 0.0368 | 11 | 3.0023 to 3.0073 | 0.0216 to 0.0292 | ||
| 0.0318 to 0.0394 | 10 | 0.0216 to 0.0292 | 3.0378 to 3.0429 |
nickel pipe suppliers, We Keep Bulk Stock of WERKSTOFF NR. 2.4066 Square and Rectangular Pipe at our stockyard, contact us to request a quote
3 1/2" IPS( 4.000"O. D.) |
1/8" IPS(.405"O. D.) |
|---|---|
SCH 40, 10, 160, 80, XXH |
SCH 40, 80 |
4" IPS(4.500"O. D.) |
1/4" IPS(.540"O. D.) |
SCH 40, 10, 160, 80, XXH |
SCH 40, 10, 80 |
5" IPS( 5.563"O. D.) |
3/8" IPS(.675"O. D.) |
SCH 40, 10, 160, 80, XXH |
SCH 40, 10, 80 |
6" IPS(6.625"O. D.) |
1/2" IPS(.840"O. D.) |
SCH 10, 5, 80, 40, 160, 120 XXH |
SCH 5, 40, 10, 160, 80, XXH |
8 ” IPS(8.625"O. D.) |
3/4" IPS(1.050"O. D.) |
SCH 10, 5, 80, 40, 160, 120 XXH |
SCH 40, 10, 160, 80, XXH |
10" IPS(10.750"O. D.) |
1" IPS:(1.315′O. D.) |
SCH 10, 20, TRUE 80(.500), 40, 80 (.500), |
SCH 5, 40, 10, 160, 80, XXH |
12" IPS(12.750"O. D.) |
1-1/4" IPS(1.660"O. D.) |
SCH 10, 20, TRUE40(.406), 40(.375), SCH80(.500) |
SCH 40, 10, 160, 80, XXH |
14" IPS(14.000"O. D.) |
1-1/2" IPS(1.900"O. D.) |
SCH10(.188), SCH40(.375) |
SCH 40, 10, 160, 80, XXH |
16" IPS(16.000"O. D.) |
2" IPS(2.375"O. D.) |
SCH10(.188), SCH40(.375) |
SCH 40, 10, 160, 80, XXH |
18" IPS (18.000"O. D.) |
2 1/2" IPS(2.875"O. D.) |
SCH-40 (.375) |
SCH 40, 10, 160, 80, XXH |
3" IPS( 3.500"O. D.) |
|
SCH 5, 40, 10, 160, 80, XXH |
NPS |
Wall Thickness |
Outside Diameter |
Weight |
Weight |
|||
inch |
milimeter |
inch |
milimeter |
kg/Mtr |
Schedule |
Lb/ft |
|
1/2″ |
0.0109 |
2.0769 |
0.0840 |
21 |
1.0268 |
40 STD |
0.0851 |
0.0147 |
3.0734 |
1.0621 |
80 STD |
1.0088 |
|||
3/4″ |
0.0113 |
2.0870 |
1.0050 |
27 |
1.0684 |
40 STD |
1.0131 |
0.0154 |
3.0912 |
2.0195 |
80 STD |
1.0474 |
|||
1″ |
0.0133 |
3.0378 |
1.0315 |
33 |
2.0501 |
40 STD |
1.0679 |
0.0179 |
4.0547 |
3.0325 |
80 STD |
2.0172 |
|||
1 1/4″ |
0.0140 |
3.0556 |
1.0660 |
42 |
3.0385 |
40 STD |
2.0273 |
0.0191 |
4.0851 |
4.0464 |
80 STD |
2.0997 |
|||
1 1/2″ |
0.0145 |
3.0683 |
1.0900 |
48 |
4.0048 |
40 STD |
2.0718 |
0.0200 |
5.0080 |
5.0409 |
80 STD |
3.0361 |
|||
2″ |
0.0154 |
3.0912 |
2.0375 |
60 |
5.0441 |
40 STD |
3.0653 |
0.0218 |
5.0537 |
7.0480 |
80 STD |
5.0022 |
|||
2 1/2″ |
0.0203 |
5.0516 |
2.0875 |
73 |
8.0629 |
40 STD |
5.0793 |
0.0276 |
7.0010 |
11.0411 |
80 STD |
7.0661 |
|||
3″ |
0.0216 |
5.0486 |
3.0500 |
89 |
11.0284 |
40 STD |
7.0576 |
0.0300 |
7.0620 |
15.0272 |
80 STD |
10.0253 |
|||
4″ |
0.0237 |
6.0020 |
4.0500 |
114 |
16.0073 |
10.0790 |
|
0.0337 |
8.0560 |
22.0318 |
14.0983 |
||||
6″ |
0.0188 |
4.0775 |
6.0625 |
168 |
19.0252 |
12.0924 |
|
0.0203 |
5.0516 |
20.0739 |
13.0923 |
||||
0.0219 |
5.0563 |
22.0318 |
14.0983 |
||||
0.0250 |
6.0350 |
25.0354 |
17.0021 |
||||
0.0280 |
7.0112 |
58.0263 |
40 STD |
18.0974 |
|||
0.0312 |
7.0925 |
31.0334 |
21.0036 |
||||
0.0375 |
9.0525 |
37.0285 |
25.0031 |
||||
0.0432 |
10.0973 |
42.0561 |
80 XHY |
28.0573 |
|||
0.0500 |
12.0700 |
48.0719 |
32.0708 |
||||
8″ |
0.0188 |
4.0775 |
8.0625 |
219 |
25.0233 |
16.0940 |
|
0.0203 |
5.0156 |
27.0198 |
18.0259 |
||||
0.0219 |
5.0563 |
29.0286 |
19.0661 |
||||
0.0250 |
6.0350 |
33.0308 |
20 |
22.0361 |
|||
0.0277 |
7.0036 |
36.0786 |
30 |
24.0696 |
|||
0.0322 |
8.0179 |
42.0352 |
40 |
28.0554 |
|||
0.0375 |
9.0525 |
49.0216 |
33.0041 |
||||
0.0406 |
10.0312 |
53.0085 |
60 |
35.0638 |
|||
0.0500 |
12.0700 |
64.0627 |
80 XHY |
43.0388 |
|||
10″ |
0.0188 |
4.0775 |
10.0750 |
273 |
31.0588 |
21.0207 |
|
0.0219 |
5.0563 |
36.0689 |
24.0631 |
||||
0.0250 |
6.0350 |
41.0759 |
20 |
28.0035 |
|||
0.0307 |
7.0798 |
51.0002 |
30 |
34.0240 |
|||
0.0344 |
8.0738 |
56.0946 |
38.0231 |
||||
0.0365 |
9.0271 |
63.0301 |
40 STD |
40.0483 |
|||
0.0438 |
11.0125 |
71.0852 |
48.0238 |
||||
0.0500 |
12.0700 |
81.0530 |
60 XHY |
54.0735 |
|||
0.0594 |
15.0088 |
95.0969 |
80 |
64.0429 |
|||
12″ |
0.0188 |
4.0775 |
12.0750 |
324 |
37.0570 |
25.0222 |
|
0.0219 |
5.0563 |
43.0657 |
29.0309 |
||||
0.0250 |
6.0350 |
49.0713 |
33.0375 |
||||
0.0281 |
7.0137 |
55.0739 |
37.0420 |
||||
0.0312 |
7.0925 |
61.0735 |
41.0445 |
||||
0.0375 |
9.0525 |
73.0824 |
49.0562 |
||||
0.0406 |
10.0312 |
79.0727 |
53.0525 |
||||
0.0500 |
12.0700 |
97.0438 |
65.0415 |
||||
0.0562 |
14.0275 |
108.0966 |
73.0154 |
||||
14″ |
0.0188 |
4.0775 |
14.0000 |
356 |
41.0308 |
27.0732 |
|
0.0219 |
5.0563 |
48.0012 |
32.0233 |
||||
0.0250 |
6.0350 |
54.0685 |
20 |
36.0713 |
|||
0.0281 |
7.0137 |
61.0327 |
41.0172 |
||||
0.0312 |
7.0925 |
67.0939 |
45.0611 |
||||
0.0375 |
9.0525 |
81.0281 |
STD |
54.0568 |
|||
0.0438 |
11.0125 |
94.0498 |
40 |
63.0441 |
|||
0.0500 |
12.0700 |
107.0381 |
XHY |
72.0090 |
|||
| 0.0625 | 15.0875 |
132.0983 |
89.0278 |
||||
16” |
0.0188 |
4.0775 |
16.0000 |
406 |
47.0290 |
21.0748 |
|
0.0219 |
5.0563 |
54.0980 |
36.0910 |
||||
0.0250 |
6.0350 |
62.0639 |
10 |
42.0053 |
|||
0.0281 |
7.0137 |
70.0268 |
47.0174 |
||||
0.0312 |
7.0925 |
77.0866 |
20 |
52.0275 |
|||
0.0344 |
8.0738 |
85.0677 |
57.0519 |
||||
0.0375 |
9.0525 |
93.0213 |
30 STD |
62.0578 |
|||
0.0438 |
11.0125 |
108.0433 |
72.0797 |
||||
0.0500 |
12.0700 |
123.0289 |
40 XHY |
82.0770 |
|||
18″ |
0.0219 |
5.0563 |
18.0000 |
457 |
61.0948 |
41.0588 |
|
0.0250 |
6.0350 |
70.0593 |
47.0393 |
||||
0.0281 |
7.0137 |
79.0208 |
53.0176 |
||||
0.0312 |
7.0925 |
87.0792 |
20 |
58.0939 |
|||
0.0375 |
9.0525 |
105.0144 |
STD |
70.0588 |
|||
0.0438 |
11.0125 |
122.0369 |
30 |
82.0152 |
|||
0.0500 |
12.0700 |
139.0198 |
XHY |
93.0450 |
|||
0.0562 |
14.0275 |
155.0904 |
40 |
104.0666 |
|||
0.0625 |
15.0875 |
172.0754 |
115.0978 |
||||
20″ |
0.0250 |
6.0350 |
20.0000 |
508 |
78.0547 |
52.0733 |
|
0.0282 |
7.0163 |
88.0458 |
59.0386 |
||||
0.0312 |
7.0925 |
97.0719 |
65.0604 |
||||
0.0375 |
9.0525 |
117.0075 |
20 STD |
78.0598 |
|||
0.0438 |
11.0125 |
136.0305 |
91.0508 |
||||
0.0500 |
12.0700 |
155.0106 |
30 XHY |
104.0130 |
|||
0.0594 |
15.0088 |
183.0378 |
40 |
123.0110 |
|||
0.0625 |
15.0875 |
192.0640 |
129.0328 |
||||
0.0688 |
17.0475 |
211.0368 |
141.0901 |
||||
24″ |
0.0250 |
6.0350 |
24.0000 |
610 |
94.0456 |
63.0413 |
|
0.0281 |
7.0137 |
106.0029 |
71.0183 |
||||
0.0312 |
7.0925 |
117.0573 |
18.0932 |
||||
0.0375 |
9.0525 |
140.0938 |
20 STD |
64.0618 |
|||
0.0438 |
11.0125 |
164.0176 |
110.0219 |
||||
0.0500 |
12.0700 |
186.0923 |
XHY |
125.0490 |
|||
0.0625 |
15.0875 |
232.0410 |
156.0028 |
||||
0.0688 |
17.0475 |
255.0148 |
40 |
171.0293 |
|||
0.0750 |
19.0050 |
277.0401 |
186.0233 |
||||
30″ |
0.0250 |
6.0350 |
30.0000 |
762 |
118.0318 |
79.0433 |
|
0.0281 |
7.0137 |
132.0851 |
89.0189 |
||||
0.0312 |
7.0925 |
147.0353 |
10 |
98.0925 |
|||
0.0375 |
9.0525 |
176.0731 |
STD |
118.0648 |
|||
0.0438 |
11.0125 |
205.0983 |
138.0286 |
||||
0.0500 |
12.0700 |
234.0647 |
20 XHY |
157.0530 |
|||
0.0625 |
15.0875 |
292.0066 |
30 |
196.0078 |
|||
0.0688 |
17.0475 |
320.0817 |
215.0380 |
||||
0.0750 |
19.0050 |
348.0988 |
234.0293 |
||||
36″ |
0.0250 |
6.0350 |
36.0000 |
914 |
142.0180 |
95.0453 |
|
0.0281 |
7.0137 |
159.0672 |
107.0196 |
||||
0.0312 |
7.0925 |
177.0133 |
10 |
118.0918 |
|||
0.0375 |
9.0525 |
215.0525 |
STD |
142.0678 |
|||
0.0438 |
11.0125 |
247.0790 |
166.0353 |
||||
0.0500 |
12.0700 |
282.0372 |
20 XHY |
198.0570 |
|||
0.0625 |
15.0875 |
351.0723 |
236.0128 |
||||
0.0688 |
17.0475 |
386.0487 |
259.0467 |
||||
0.0750 |
19.0050 |
420.0576 |
282.0353 |
||||
42″ |
0.0312 |
7.0925 |
42.0000 |
1067 |
206.0914 |
138.0911 |
|
0.0375 |
9.0525 |
248.0319 |
STD |
166.0708 |
|||
0.0500 |
12.0700 |
33.0097 |
XHY |
221.0610 |
|||
0.0750 |
19.0050 |
492.0163 |
330.0413 |
||||
48″ |
0.0375 |
9.0525 |
48.0000 |
1219 |
284.0112 |
STD |
190.0738 |
0.0438 |
11.0125 |
331.0404 |
222.0487 |
||||
0.0500 |
12.0700 |
377.0822 |
XHY |
253.0650 |
|||
0.0750 |
19.0050 |
563.0750 |
378.0473 |
||||
0.0875 |
22.0225 |
655.0969 |
440.0383 |
||||
| Avarage Wall inches | Outside Diameter inches | Internal Area (in2) | Inside Diameter inches | D/t Ratio | Tube Cross Sectional Area (in2) |
|---|---|---|---|---|---|
| 0.0020 | 0.0250 | 0.00346 | 0.0210 | 12.050 | 0.00145 |
| 0.0028 | 0.0250 | 0.00296 | 0.0194 | 8.093 | 0.00195 |
| 0.0035 | 0.0250 | 0.00254 | 0.0180 | 7.014 | 0.00236 |
| 0.0049 | 0.0250 | 0.00181 | 0.0152 | 5.010 | 0.00309 |
| 0.0065 | 0.0250 | 0.00113 | 0.0120 | 3.085 | 0.00378 |
| 0.0020 | 0.0375 | 0.00881 | 0.0335 | 18.075 | 0.00223 |
| 0.0028 | 0.0375 | 0.00799 | 0.0319 | 13.039 | 0.00305 |
| 0.0035 | 0.0375 | 0.00731 | 0.0305 | 10.071 | 0.00374 |
| 0.0049 | 0.0375 | 0.00603 | 0.0277 | 7.065 | 0.00502 |
| 0.0065 | 0.0375 | 0.00471 | 0.0245 | 5.077 | 0.00633 |
| 0.0020 | 0.0500 | 0.01662 | 0.0460 | 25.000 | 0.00302 |
| 0.0028 | 0.0500 | 0.01548 | 0.0444 | 17.086 | 0.00415 |
| 0.0035 | 0.0500 | 0.01452 | 0.0430 | 14.029 | 0.00511 |
| 0.0049 | 0.0500 | 0.01213 | 0.0402 | 10.020 | 0.00694 |
| 0.0065 | 0.0500 | 0.01075 | 0.0370 | 7.069 | 0.00888 |
| 0.0083 | 0.0500 | 0.00876 | 0.0334 | 6.002 | 0.01087 |
| 0.0020 | 0.0625 | 0.02688 | 0.0585 | 31.025 | 0.00380 |
| 0.0028 | 0.0625 | 0.02543 | 0.0569 | 22.032 | 0.00525 |
| 0.0035 | 0.0625 | 0.02419 | 0.0555 | 17.086 | 0.00649 |
| 0.0049 | 0.0625 | 0.02181 | 0.0527 | 12.076 | 0.00887 |
| 0.0065 | 0.0625 | 0.01924 | 0.0495 | 9.062 | 0.01144 |
| 0.0083 | 0.0625 | 0.01655 | 0.0459 | 7.053 | 0.01413 |
| 0.0095 | 0.0625 | 0.01486 | 0.0435 | 6.058 | 0.01582 |
| 0.0109 | 0.0625 | 0.01301 | 0.0407 | 5.073 | 0.01767 |
| 0.0028 | 0.0750 | 0.03783 | 0.0694 | 26.079 | 0.00635 |
| 0.0035 | 0.0750 | 0.03632 | 0.0680 | 21.043 | 0.00786 |
| 0.0049 | 0.0750 | 0.03339 | 0.0652 | 15.031 | 0.01079 |
| 0.0065 | 0.0750 | 0.03019 | 0.0620 | 11.054 | 0.01399 |
| 0.0083 | 0.0750 | 0.02679 | 0.0584 | 9.004 | 0.01739 |
| 0.0095 | 0.0750 | 0.02463 | 0.0560 | 7.089 | 0.01955 |
| 0.0109 | 0.0750 | 0.02223 | 0.0532 | 6.088 | 0.02195 |
| 0.0120 | 0.0750 | 0.02043 | 0.0510 | 6.025 | 0.02375 |
| 0.0020 | 0.0875 | 0.05476 | 0.0835 | 43.075 | 0.00537 |
| 0.0028 | 0.0875 | 0.05268 | 0.0819 | 31.025 | 0.00745 |
| 0.0035 | 0.0875 | 0.05090 | 0.0805 | 25.000 | 0.00924 |
| 0.0049 | 0.0875 | 0.04742 | 0.0777 | 17.086 | 0.01272 |
| 0.0065 | 0.0875 | 0.04359 | 0.0745 | 13.046 | 0.01654 |
| 0.0083 | 0.0875 | 0.03948 | 0.0709 | 10.054 | 0.02065 |
| 0.0095 | 0.0875 | 0.03685 | 0.0685 | 9.021 | 0.02328 |
| 0.0109 | 0.0875 | 0.03390 | 0.0657 | 8.003 | 0.02623 |
| 0.0120 | 0.0875 | 0.0316L7 | 0.0635 | 7.029 | 0.02846 |
| 0.0028 | 1.0000 | 0.06999 | 0.0944 | 35.071 | 0.00855 |
| 0.0035 | 1.0000 | 0.06793 | 0.0930 | 28.057 | 0.01061 |
| 0.0049 | 1.0000 | 0.06390 | 0.0902 | 20.041 | 0.01464 |
| 0.0065 | 1.0000 | 0.05945 | 0.0870 | 15.038 | 0.01909 |
| 0.0083 | 1.0000 | 0.05463 | 0.0834 | 12.005 | 0.02391 |
| 0.0095 | 1.0000 | 0.05153 | 0.0810 | 10.053 | 0.02701 |
| 0.0109 | 1.0000 | 0.04803 | 0.0782 | 9.017 | 0.03051 |
| 0.0120 | 1.0000 | 0.04536 | 0.0760 | 8.033 | 0.03318 |
| 0.0134 | 1.0000 | 0.04208 | 0.0732 | 7.046 | 0.03646 |
| 0.0035 | 1.0250 | 1.00936 | 1.0180 | 35.071 | 0.01336 |
| 0.0049 | 1.0250 | 1.00423 | 1.0152 | 25.051 | 0.01849 |
| 0.0065 | 1.0250 | 0.09852 | 1.0120 | 19.023 | 0.02420 |
| 0.0083 | 1.0250 | 0.09229 | 1.0084 | 15.006 | 0.0316L3 |
| 0.0095 | 1.0250 | 0.08825 | 1.0060 | 13.016 | 0.03447 |
| 0.0109 | 1.0250 | 0.08365 | 1.0032 | 11.047 | 0.03907 |
| 0.0120 | 1.0250 | 0.08012 | 1.0010 | 10.042 | 0.04260 |
| 0.0134 | 1.0250 | 0.07574 | 0.0982 | 9.033 | 0.04698 |
| 0.0035 | 1.0500 | 1.06061 | 1.0430 | 42.086 | 0.01611 |
| 0.0049 | 1.0500 | 1.05438 | 1.0402 | 30.061 | 0.02234 |
| 0.0065 | 1.0500 | 1.04741 | 1.0370 | 23.008 | 0.02930 |
| 0.0083 | 1.0500 | 1.03977 | 1.0334 | 18.007 | 0.03695 |
| 0.0095 | 1.0500 | 1.03478 | 1.0310 | 15.079 | 0.04193 |
| 0.0109 | 1.0500 | 1.02908 | 1.0282 | 13.076 | 0.04763 |
| 0.0120 | 1.0500 | 1.02469 | 1.0260 | 12.050 | 0.05202 |
| 0.0134 | 1.0500 | 1.01921 | 1.0232 | 11.019 | 0.05750 |
| 0.0148 | 1.0500 | 1.01385 | 1.0204 | 10.014 | 0.06286 |
| 0.0035 | 1.0750 | 2.02167 | 1.0680 | 50.000 | 0.01886 |
| 0.0049 | 1.0750 | 2.08413 | 1.0902 | 40.082 | 0.03003 |
| 0.0065 | 1.0750 | 2.00612 | 1.0620 | 26.092 | 0.03441 |
| 0.0083 | 1.0750 | 1.09706 | 1.0584 | 21.008 | 0.04347 |
| 0.0095 | 1.0750 | 1.09113 | 1.0560 | 18.042 | 0.04939 |
| 0.0109 | 1.0750 | 1.08433 | 1.0532 | 16.006 | 0.05619 |
| 0.0120 | 1.0750 | 1.07908 | 1.0510 | 14.058 | 0.06145 |
| 0.0134 | 1.0750 | 1.07250 | 1.0482 | 13.006 | 0.06803 |
| 0.0148 | 1.0750 | 1.06604 | 1.0454 | 11.082 | 0.07449 |
| 0.0165 | 1.0750 | 1.05837 | 1.0420 | 10.061 | 0.08216 |
| 0.0035 | 2.0000 | 2.09255 | 1.0930 | 57.014 | 0.02161 |
| 0.0049 | 2.0000 | 2.08413 | 1.0902 | 40.082 | 0.03003 |
| 0.0065 | 2.0000 | 2.07465 | 1.0870 | 30.077 | 0.03951 |
| 0.0083 | 2.0000 | 2.06417 | 1.0834 | 24.010 | 0.04999 |
| 0.0095 | 2.0000 | 2.05730 | 1.0810 | 21.005 | 0.05685 |
| 0.0109 | 2.0000 | 2.04941 | 1.0782 | 18.035 | 0.06475 |
| 0.0120 | 2.0000 | 2.04328 | 1.0760 | 16.067 | 0.07087 |
| 0.0134 | 2.0000 | 2.03561 | 1.0732 | 14.093 | 0.07855 |
| 0.0148 | 2.0000 | 2.02805 | 1.0704 | 13.051 | 0.08611 |
| 0.0165 | 2.0000 | 2.01904 | 1.0670 | 12.012 | 0.09512 |
| Product form | Alloy | Dimension |
|---|---|---|
| Pipe, Tube, annealed, cold drawn, seamless | (99.00 Ni min) NICKEL 200 | 16.00 x 1.05 milimeter |
| Pipe, Tube, annealed, cold drawn | 33.04 x 3.038 milimeter (1"nb sch 40s) | |
| Pipe, Tube, annealed, cold drawn | 48.026 x 2.077 milimeter (1½"nb sch 10s) | |
| Pipe, Tube, annealed, cold drawn | 60.033 x 2.077 milimeter (2"nb sch 10s) | |
| Pipe, Tube, annealed, cold drawn | 60.033 x 3.091 milimeter (2"nb sch 40s) | |
| Pipe, Tube, annealed, cold drawn | 88.09 x 3.005 milimeter (3"nb sch 10s) | |
| Pipe, Tube, annealed, cold drawn | 114.03 x 3.005 milimeter (4"nb sch 10s) |
Specific size and thickness are available in Nickel 200 Cold Rolled Coiled//Boiler/Condenser Tubing , view Nw 2200 Heat Exchanger tube sizes
Nickel
Nickel could be a compound part with image Ni and atomic number 28. It very well may be a shiny white splendid metal with a slight brilliant hint. Nickel has a spot to the move metals and is troublesome and bendable
Nickel Chemical Composition
| Nickel 200 | Ni | P | C | Cu | Mn | Fe | Cr | Mo | Si | S |
| 99.00 minimum | – | 0.015 maximum | 0.025 maximum | 0.035 maximum | 0.04 maximum | – | – | 0.01 maximum | 0.001 maximum | |
| Nickel 201 | Ni | P | C | Cu | Mn | Fe | Cr | Mo | Si | S |
| Balance | – | 0.015 maximum | 0.025 maximum | 0.035 maximum | 0.040 maximum | – | – | 0.035 maximum | 0.001 maximum |
Inconel
Inconel is a group of austenitic nickel-chromium-based superalloys.
Inconel Chemical Composition
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alloy 200 Exhaust Pipes |
Alloy 200 UNS N02200 Round Pipes |
Schedule 40 Nickel Alloy 200 Pipes |
ASME SB161 Nickel 200 EFW Pipes |
Nickel Alloy 200 Pipes material |
Nickel 200 Hexagonal Pipes |
ASTM B161 Nickel 200 Capillary Pipes |
ASTM B161 200 Nickel Custom Pipes |
Small diameter Nickel 200 Pipes |
Alloy 200 Rectangular Pipes |
High pressure UNS N02200 Pipes |
Capillary ASTM B161 Nickel 200 Thin Pipes |
2.4066 Alloy 200 Clad Pipes |
Nickel 200 Bush Hex Pipes |
Nickel 200 Thin Wall Pipes |
200 Alloy Square Pipes |
Alloy 200 Rectangular Tube |
Nickel Alloy 200 elliptical and Oval Tube |
Alloy 200 SCH 80 Tube |
200 Nickel Alloy SCH 40 Tube |
Alloy 200 Bellows Tubes |
Alloy 200 High-strength capillary tubing |
Alloy 200 Transmission Tubes |
ASME SB161 200 Nickel precision Tubes |
WERKSTOFF NR. 2.4066 Electropolished Tube |
Alloy 200 Instrumentation Tube |
Alloy 200 Electropolished Tube |
Alloy 200 Seamless Hollow Tube |
ASTM B725 200 Nickel Oil & Gas Tubing |
Alloy 200 Condenser Tube |
Alloy 200 SCH 80 Tube |
Alloy 200 SCH 40 Tube |
Alloy 200 Aero engine Tubes |
Alloy 200 cold drawn seamless Tubes |
Alloy 200 Furnace Tubes |
Alloy 200 Gas Tubing |
Alloy 200 Cold drawn seamless tubing (CDS) |
Alloy 200 Hot finished seamless tubing (HFS) |
Alloy 200 High Pressure Tubes |
200 Nickel Alloy Precision Tubing |
ASME SB161 200 Nickel Capillary Tubing |
Alloy 200 Bourdon Tubes |
Nickel Alloy 200 Finned Tubes |
Alloy 200 Drawn over mandrel (DOM) |
Alloy 200 Furnace Tubes |
Alloy 200 Aerospace Engine Tubes |
Alloy 200 seamless straight tubing |
Alloy 200 seamless coil tubing |
Nickel 200 Tube Sizes
| Types | Out diameter | Length | Wall thickness |
|---|---|---|---|
| NB Sizes (available) | 1/8” ~ 8” | Upto 6 Meters | SCH 40 /SCH 10 /SCH 160/ SCH 5 / SCH 80 |
| Nickel 200 Seamless tube (as per need) | 5.00 milimeter ~ 203.02 milimeter | as per need | |
| Nickel 200 Welded tube (available + as per need) | 5.00 milimeter ~ 1219.02 milimeter | 1.00 ~ 15.00 milimeter |
| Nickel 200 Pipe O.D. (in.) |
Wall Thickness of Nickel 200 Pipe (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| 0.028 | 0.035 | 0.083 | 0.049 | 0.065 | 0.095 | 0.109 | 0.120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 4000 | 2200 | 3000 | 4600 | ||||
| 1 | 2900 | 2200 | 3400 | 3900 | 4300 | |||
- Intergranular Corrosion (IGC) Test
- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Flaring Test
- Flattening Test
- Pitting Resistance Test
- Micro and MacroTest
Check our material dispatch in following countries
| Indonesia, Dammam -KSA, Philippines, Belgium | 99.9% Pure Ni 200 Nickel 200 Pipe Price Nickel Seamless Pipe |
| France, Qatar, Europe, Thailand | More Than 99.8% Nickel Alloy 200 Seamless Pipe Purity |
| Thailand, France, Qatar, Europe | Silver Copper Pure Nickel Tube Nickel 200 Pipe |
| Malaysia, USA, Bangladesh, Finland | 99.6% Pure Nickel Ni Pipe 200 N4 N6 for Chemical Industry |
| South Africa, Brazil, Saudi Arabia (KSA), Kuwait | Nickel 200 Pure Nickel Micro Capillary Pipe |
| South Africa, Singapore, Bahrain | Suh660, Gh3030, Nickel Alloy 200 Stainless Steel Pipe |
| Nigeria, UK, Australia, Philippines | Cold Rolled Nickel 200 Pipe with Polished Finish |
| Hong Kong, Oman, Malaysia | Nickel Pipe Price Pure Nickel Seamless Pipe |
| Singapore, Italy, Iran, Chile | Welded Nickel Pipe |
| Turkey, United Arab Emirates (UAE), Norway | Corrosion Resistant Uns N02200 Tube/Pipe |
| Malaysia, Russia, Netherlands | ASTM B161 Nickel 200 ubes & Pipes |
| Egypt, Singapore, Mexico, UK, Spain | Nickel Alloy 200 Tube Pipe |
| United Kingdom -UK, Europe, Malaysia | N6 Grade ASTM B161 Nickel Pipe in Stock |
| Canada, Ellington -United States, UK | Polished 2.4060 2.4061 Nickel Tube/Pipe with Small Diameter |
| Malaysia, Canada, Singapore, Philippines | Welded Nickel Alloy Pipes |
| Romania, Poland, Europe, Japan | Pure Nickel Uns No2200 Tube Pipe for Heat Exchanger |
| Malaysia, Colombia, Sweden, China | Pure Nickel Tube/Pure Nickel Pipe |
| Los Alamos -Mexico, Taiwan, Philippines | Nickel 200 Seamless Pipe Corrosion Resistant 4X0.3mm |
| South Korea, Singapore, NY 12203 (USA) | Material Ni 200 Welded Nickel Tube/Pipe |
- HVAC Chillers and Heat Exchanger Coatings
- Curran 1000 T Hybrid Epoxy
- Novolac Epoxy
- Phenol Epoxy
- IGS high velocity thermal spray (HVTS) coating solutions
- Sakaphen- Shell and tube heat exchanger lining
- High Functionality Epoxy - Curran Coating
- Surface Condenser Tube Sheets
- Thin Film Engineered Polymer Coatings
- liquid epoxy coatings
- NABL approved Laboratory Test Reports
- Material Traceability Records
- Form A for the purposes of the Generalized System of Preferences (GSP)
- Raw Material Test Reports
- Commercial Invoice which includes HS Code
- Guarantee Letter
- Quality Assurance Plan (QAP)
- Test Certificates certifying NACE MR0103, NACE MR0175
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- Heat Treatment Charts
- as per EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Fumigation Certificates
Nickel 200 Seamless Tube is routinely bowed on common tube bending gear. Mandrel benders are proposed particularly for tight bends. bends made without a mandrel require greater radii. If more humble span bends are required, it may be critical to twist the tubing at 400°-600°F (204°-316°C).
| WALL THICKNESS INCHES | O0.0D0.0 +/- INCHES | O0.0D0.0 INCHES |
|---|---|---|
| 0.0025 - 0.0065 | 0.0005 | 1/2" - 1" incl0.0 |
| Over 0.0065 - 0.0134 | 0.0010 | |
| 0.0025 - 0.0065 | 0.0008 | 1 - 1-1/2" incl0.0 |
| Over 0.0065 - 0.0134 | 0.0010 | |
| 0.0025 - 0.0049 | 0.0010 | 1-1/2" - 2" incl0.0 |
| Over 0.0049 - 0.0083 | 0.0011 | |
| Over 0.0083 - 0.0148 | 0.0012 | |
| 0.0032 - 0.0065 | 0.0012 | 2" - 2-1/2" incl0.0 |
| Over 0.0065 - 0.0109 | 0.0013 | |
| Over 0.0109 - 0.0165 | 0.0014 | |
| 0.0032 - 0.0165 | 0.0014 | 2-1/2" - 3-1/2" incl0.0 |
| Over 0.0165 - 0.0220 | 0.0020 | |
| 0.0083 - 0.0165 | 0.0020 | 3-1/2" - 5" incl0.0 |
| Over 0.0165 - 0.0220 | 0.0025 |
Physical Properties Of Alloy 200 Pipe
Melting Point (°C) |
1435 to 1446 |
Density (lb/in 3) |
0.0321 |
Density (g/cm 3) |
8.089 |
Melting Point (°F) |
2615 to 2635 |
UNS N02200 welded pipe Material Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Grade | C | Mn | Ni | Cr | S | Fe | Si | Cu |
| Nickel 200 | 0.015 maximum | 0.035 maximum | 99.00 minimum | – | 0.001 maximum | 0.040 maximum | 0.035 maximum | 0.025 maximum |
| Element | Density | Yield Strength (0.2%Offset) | Elongation | Melting Point | Tensile Strength |
| Nickel 200 | 8.9 gram/centimeter3 | MPa – 148, Psi – 21500 | 45 % | (2635 °F) 1446 °C | MPa – 462, Psi – 67000 |
- Food processing equipment
- Salt production
- Manufacture and handling of sodium hydroxide, particularly at temperatures above 300° F
- Marine and offshore engineering