Inconel 600 Tube Suppliers, ASTM B167 Alloy 600 Seamless Pipe manufacturer in India
Inconel 600 Pipe
Inconel 600 Tube
ASTM B167 Inconel 600 Seamless Pipe
ASTM B517 Alloy 600 welded pipe
Astm B163 Inconel 600 Seamless Tube
Astm B516 Inconel 600 Welded Tube
Suppliers of ASTM B517 Uns N06600 Welded Pipe Material in Mumbai, Don't spend extra for size of Nickel Alloy 600 Seamless/Welded Tube , we supply custom sizes
Werkstoff Nr. 2.4816 Heat Exchanger Tube is produced under ATSM 516 standard via an automatic welding process. 600 Inconel Exhaust Tube is welded eliminating the addition of filler metal. Under ATSM 516 specification Tubi Inconel 600 is supposed to be put through a cold working process. This process can be used on weld metal in Inconel Ncf 600 Condenser Tube or on weld and base metal in Alloy 600 Erw Tube.The average wall and outside diameter are accounted for in Astm B163 Inconel 600 Seamless Tube. The ASTM B163/ B167/ B517/ B516 standard takes care not only of the chemical requirements but also encompasses mechanical properties of Nickel Alloy 600 Erw Pipe.
The tensile strength of the Iconic 600 tube is 95000-psi 655-MPa with a yield strength of this 45000-psi 310-MPa. In general, Inconel 600 tubes have a melting point of 1413 degrees C with a density of 8.47g/cm3. ASTM B167 Inconel 600 Seamless Pipe has a low resistance to an oxidizing solution such as heated concentrated nitric acid. Inconel 600 Pipe Suppliers recommend ASTM B517 Uns N06600 Welded Pipe due to its ability to resist neutral and alkaline salts.
We also provide 600 Coiled Tube which is a nickel chromium-based coiled tube used in boilers and heat exchangers and has all the properties of Inconel 600 pipes as the material remains the same. As well as Werkstoff Nr. 2.4816 Hexagonal Pipe which is made up of nickel-chromium and iron. This increases the alloy's resistance to compounds that contain sulfur along with maintaining its resistance towards the oxidizing condition.
At Victor Steel we will provide you all that you require and customize it as per your needs.
Table Of Content
view inconel 600 tube Price, stockist of Astm B516 DIN 2.4816 hot and cold rolled Tube in different length or cut to size at distributor price
| Description | Inconel 600 pipe Price in india |
|---|---|
| Inconel 600 Tube/ Alloy Pipe Cold Drawing Bright Surface | US $ 1500-1800 / Ton |
| Cold Draw Seamless/ ERW Spiral Welded/Inconel 600 Pipe | US $ 20-70 / kg |
| Nickel Based Alloy Seamless Tube and Pipe Inconel 600 | US $ 35000-60000 / Ton |
| Pickling Inconel 600 Seamless Pipe | US $ 12.55-14.95 / kg |
| Inconel 600 (UNS N06600) Nickel Alloy Pipe | US $ 20-30 / Meter |
| Nickel Alloy Uns N06600 Inconel 600 Tube / Pipe | US $ 16.9-40 / kg |
| Inconel 600 Seamless Pipes | Min. Order: 50 Meters
|
| Inconel 600 Seamless Steel Round Pipe | US $ 500-20000 / Ton |
| Hot Rolled Good Price Different Diameter Inconel 600 Pipe | US $ 34.5-35 / kg |
| Nickle Alloy Inconel 600 Seamless Pipe | US $ 1 / Ton |
In the event that it's not all that much difficulty, note This is an expected Price of Inconel 600 Pipe in India. Mercifully don't stop for a second to connect with us latest Alloy 600 Tube Price in India. Furthermore compare our Price and other ASME SB167 Inconel 600 Pipe Suppliers in India and China.
| ASTM Specification | ASTM B167/ ASME SB167, ASTM B163/ ASME SB163, ASTM B 517/ ASME SB517, ASTM B516/ ASME SB516 |
|---|---|
| International Specification | WERKSTOFF Nr 2.4816, BS 3072-3076 (NA14) DIN 17750, DIN 17742, DIN 17754, TÜV 305 AFNOR-NC 15 Fe, AMS 5580, ASTM B751 |
| Standard | DTD, TOCT, JIS, SAE, ASME, EN, DIN, ASTM, AMS, AISI, GB, NF, DS |
| Welded Tube Size | 6.35 milimeter To 152 milimeter OD |
| Size of Seamless Pipe | Wall thickness.: 0.05- 20 milimeter, 4 - 219 milimeter |
| Seamless Tube Size | 3.35 milimeter To 101.6 milimeter OD |
| Size of Welded Pipe | 5.0 to 1219.02 milimeter |
| Bwg & Swg | 18 Swg., 14 20 Swg., Swg. Swg., 12 16 Swg., 10 Swg. |
| size of EFW Pipe | 5.0 to 1219.02 milimeter |
| Tubing wall thickness | 0.020" –0.220", (custom wall thicknesses available) |
| Pipe Schedule | SCH10, XS, SCH80, SCH120, SCH160, SCH20, SCH60, XXS, SCH80, SCH5, SCH30, SCH40, SCH40S, SCH10S, STD, SCH140 |
| Length | Standard & Cut length , Single Random, Double Random Pipe |
| Type | Fabricated /ERW/ CEW/Seamless/ CDW //EFW / Welded /DOM Inconel 600 Pipe |
| End | Beveled End, Plain End, Screwed ends, Treaded Pipe |
| Form | Hydraulic, Rectangular, Coiled, Square, Hollow, Round, Straight Pipes/tubes, “U” Shape, Pan Cake Coils, Boiler, LSAWetc. |
| Finish | AP (Annealed & Pickled), BA (Bright & Annealed), NO.1, 2B, Polished, MF, HL, NO.4, Mirror finish, BA, 8K etc |
| Marking | Heat No. (Or as per need.), Thickness, OD, Grade, Standard Length |
| Application | Oil Pipe/tube, Gas Pipe/tube, Dairy Pipe, Fluid Pipe/tube, Boiler Tube, Heat exchanger Tube |
| Value Added Service | Expansion and Draw as per needed Length and Size, , Polish (Comilimeterercial and Electro), Machining, Pickled and Annealed Bending Etc. |
| Specialize in |
|
| Test Certificate |
|
| Technique of manufacturing | bright annealed, hot drawn, solid solution, Cold drawn, hot extruding |
| Suppliers of |
|
| Our stockyard | New Delhi, Gimhae-si, Pimpri-Chinchwad, Noida, Istanbul, Sydney, Tau, Gurgaon, Damilimeteram, Rajkot, Mexico, Mumbai, Bogota, Melbourne, Karachi, Ludhiana, Muscat, Jamshedpur, Riyadh, Manama, Courbevoie, Coimbatore, Ankara, Thiruvananthapuram, Kanpur, Kolkata, Bengaluru, London, Howrah, Kuwait, Hyderabad, Janeiro, Bangalore, Montreal, Chennai, Nagpur, Indore, Calgary, Gujarat, Vadodara, Ernakulam, Perth, Santiago, India, Caracas, Ranchi, Surat, Ahvaz, Tehran, Ahmedabad, Khobar, Baroda, Lagos, Abu Dhabi, Port-of-Spain, |
If stronger weldable pipes with high corrosion resistance are what you are looking for. Iconic 600 will serve your purpose. Alloy 600 Tubes have high Carburization and oxidations. It is used in the Aerospace industry, chemical plants, power generation, and refineries.Astm B516 Inconel 600 Welded Tube is the standard 600 Inconel Boiler Tube that is used in heat exchanges, condenser, and boilers. Inconel 600 welded tube Suppliers manufacture them from flat-rolled alloy.
Pipe WT mm |
Outside Diameter of ASTM B167 Inconel 600 Pipe milimeter |
Sch |
in.0 |
Kg/m |
|---|---|---|---|---|
1.065 |
13.072 |
10S |
1/4 |
0.050 |
2.024 |
13.072 |
40S |
1/4 |
0.064 |
3.002 |
13.072 |
80S |
1/4 |
0.081 |
1.065 |
17.015 |
10S |
3/8 |
0.064 |
2.031 |
17.015 |
40S |
3/8 |
0.086 |
3.020 |
17.015 |
80S |
3/8 |
1.012 |
2.011 |
21.034 |
10S |
1/2 |
1.002 |
2.077 |
21.034 |
40S |
1/2 |
1.029 |
3.073 |
21.034 |
80S |
1/2 |
1.065 |
2.011 |
26.067 |
10S |
3/4 |
1.030 |
2.087 |
26.067 |
40S |
3/4 |
1.071 |
3.091 |
26.067 |
80S |
3/4 |
2.023 |
2.077 |
33.040 |
10S |
1 |
2.013 |
3.038 |
33.040 |
40S |
1 |
2.054 |
4.055 |
33.040 |
80S |
1 |
3.029 |
6.0352) |
33.040 |
160 |
1 |
4.030 |
2.077 |
42.016 |
10S |
1¼ |
2.073 |
3.056 |
42.016 |
40S |
1¼ |
3.044 |
4.085 |
42.016 |
80S |
1¼ |
4.053 |
6.0352) |
42.016 |
160 |
1¼ |
5.069 |
2.077 |
48.026 |
10S |
1½ |
3.016 |
3.068 |
48.026 |
40S |
1½ |
4.011 |
5.008 |
48.026 |
80S |
1½ |
5.049 |
2.077 |
60.033 |
10S |
2 |
3.099 |
3.091 |
60.033 |
40S |
2 |
5.052 |
5.054 |
60.033 |
80S |
2 |
7.060 |
8.0742) |
60.033 |
160 |
2 |
11.029 |
3.005 |
73.003 |
10S |
2½ |
5.035 |
5.016 |
73.003 |
40S |
2½ |
8.077 |
7.001 |
73.003 |
80S |
2½ |
11.059 |
3.005 |
88.090 |
10S |
3 |
6.056 |
5.049 |
88.090 |
40S |
3 |
11.047 |
7.062 |
88.090 |
80S |
3 |
15.051 |
11.0132) |
88.090 |
160 |
3 |
21.067 |
3.005 |
101.060 |
10S |
3½ |
7.053 |
5.074 |
101.060 |
40S |
3½ |
13.078 |
8.008 |
101.060 |
80S |
3½ |
18.092 |
3.005 |
114.030 |
10S |
4 |
8.050 |
6.002 |
114.030 |
40S |
4 |
16.032 |
8.056 |
114.030 |
80S |
4 |
22.067 |
13.0492) |
114.030 |
160 |
4 |
34.005 |
6.055 |
141.030 |
40S |
5 |
22.010 |
9.053 |
141.030 |
80S |
5 |
31.044 |
15.0882) |
141.030 |
160 |
5 |
49.087 |
3.04 |
168.028 |
10S |
6 |
14.004 |
7.011 |
168.028 |
40S |
6 |
28.069 |
10.097 |
168.028 |
80S |
6 |
43.021 |
14.027 |
168.028 |
120 |
6 |
54.075 |
18.0262) |
168.028 |
160 |
6 |
68.059 |
8.018 |
219.008 |
40S |
8 |
43.020 |
12.07 |
219.008 |
80S |
8 |
65.063 |
18.023 |
219.008 |
120 |
8 |
91.030 |
23.0012) |
219.008 |
160 |
8 |
112.097 |
OD = Inconel 600 Pipe outside diameter
WT = Inconel 600 Pipe wall thickness
Great Inconel 600 Pipe suppliers in Mumbai, India offer these 600 Inconel Tube and Tubing in different size range, from thin wall to thick wall in coils or straight lengths.
WERKSTOFF NR. 2.4816 ERW Tubing
| Regular Wall (RW) mm | Gauge | Extra Thin Wall (XTW) mm | Outside Diameter Tolerance mm | Ultra Thin Wall (UTW) mm | Thin Wall (TW) mm |
| 0.0064 to 0.0089 | 30 | 0.0304 to 0.0317 | |||
| 0.0064 to 0.0089 | 29 | o.0330 to 0.0342 | |||
| 0.0076 to 0.0102 | 28 | 0.0355 to 0.0368 | |||
| 0.0089 to 0.0115 | 27 | 0.0406 to 0.0419 | 0.0064 to 0.0089 | ||
| 0.0089 to 0.0114 | 26 | 0.0457 to 0.0469 | |||
| 0.0115 to 0.0140 | 25 | 0.0508 to 0.0520 | 0.0089 to 0.0114 | ||
| 0.0114 to 0.0140 | 24 | 0.0558 to 0.0571 | 0.0051 to 0.0102 | 0.0089 to 0.0114 | |
| 0.0140 to 0.0165 | 23 | 0.0635 to 0.0647 | 0.0051 to 0.0102 | 0.0089 to 0.0114 | |
| 0.0140 to 0.0165 | 22 | 0.0077 to 0.0102 | 0.0711 to 0.0723 | 0.0051 to 0.0102 | 0.0096 to 0.0121 |
| 0.0140 to 0.0165 | 21 | 0.0812 to 0.0825 | 0.0051 to 0.0102 | 0.0102 to 0.0127 | |
| 0.0108 to 0.0165 | 20 | 0.0901 to 0.0914 | 0.0108 to 0.0134 | ||
| 0.0166 to 0.0216 | 19 | 0.0070 to 0.0108 | 1.0054 to 1.0079 | 0.0102 to 0.0140 | |
| 0.0191 to 0.0241 | 18 | 0.0083 to 0.0121 | 1.0257 to 1.0282 | 0.0051 to 0.0102 | 0.0127 to 0.0165 |
| 0.0177 to 0.0229 | 17 | 0.0083 to 0.0127 | 1.0460 to 1.0485 | 0.0057 to 0.0102 | 0.0115 to 0.0152 |
| 0.0204 to 0.0254 | 16 | 0.0096 to 0.0133 | 1.0638 to 1.0663 | 0.0070 to 0.0121 | 0.0127 to 0.0165 |
| 0.0204 to 0.0254 | 15 | 0.0096 to 0.0134 | 1.0816 to 1.0841 | 0.0070 to 0.0121 | 0.0127 to 0.0165 |
| 0.0216 to 0.0292 | 14 | 0.0114 to 0.0165 | 2.0082 to 2.0133 | 0.0076 to 0.0134 | 0.0165 to 0.0229 |
| 0.0267 to 0.0343 | 13 | 2.0387 to 2.0438 | 0.0191 to 0.0267 | ||
| 0.0267 to 0.0321 | 12 | 2.0743 to 2.0749 | |||
| 0.0293 to 0.0368 | 11 | 3.0023 to 3.0073 | 0.0216 to 0.0292 | ||
| 0.0318 to 0.0394 | 10 | 0.0216 to 0.0292 | 3.0378 to 3.0429 |
| DIMENSIONS | WEIGHT PER | WALL | DIMENSIONS | WEIGHT PER | WALL | |
|---|---|---|---|---|---|---|
| (MM) | METRE (KG) | (MM) | (MM) | METRE (KG) | (MM) | |
| 12.07 x 12.07 | 0.044 | 1.020 | 40 x40 | 1.049 | 1.020 | |
| 12.07 x 12.07 | 0.055 | 1.050 | 40 x40 | 1.085 | 1.050 | |
| 15 x 15 | 0.053 | 1.020 | 40 x40 | 2.045 | 2.000 | |
| 15 x 15 | 0.065 | 1.050 | 40 x40 | 3.075 | 3.000 | |
| 20 x 20 | 0.071 | 1.020 | 50 x50 | 2.032 | 1.050 | |
| 20 x 20 | 0.088 | 1.050 | 50 x50 | 3.008 | 2.000 | |
| 20 x 20 | 1.019 | 2.000 | 50 x50 | 4.065 | 3.000 | |
| 25 x 25 | 0.092 | 1.020 | 60 x60 | 3.071 | 2.000 | |
| 25 x 25 | 1.014 | 1.050 | 60 x60 | 5.049 | 3.000 | |
| 25 x 25 | 1.049 | 2.000 | 70 x70 | 6.053 | 3.000 | |
| 25 x 25 | 2.020 | 3.000 | 80 x80 | 4.098 | 2.000 | |
| 30 x 30 | 1.010 | 1.020 | 80 x80 | 7.053 | 3.000 | |
| 30 x 30 | 1.037 | 1.050 | 100 x 100 | 6.040 | 2.000 | |
| 30 x 30 | 1.084 | 2.000 | 100 x 100 | 9.053 | 3.000 | |
| 30 x 30 | 2.072 | 3.000 | ||||
| Nominal Thickness (in) MM |
Pipe Size (in) |
Transverse Areas (in2) MM2 |
Diameter (in) MM |
Volume (ft3/ft) |
Number of Threads per inch of Screw | Weight | Length of Pipe (ft per sq.0 foot of surface) |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Internal | External | Steel | Internal | External | (kg/m) | (lb/ft) | Internal Surface (ft) |
External Surface (ft) |
||||
| 0.007 | 1/8 | 0.006 | 0.013 | 0.007 | 0.027 | 0.0405 | 0.00004 | 27 | 0.036 | 0.024 | 14.020 | 9.043 |
| 0.009 | ¼ | 0.010 | 0.023 | 0.013 | 0.036 | 0.0540 | 0.00007 | 18 | 0.063 | 0.042 | 10.049 | 7.007 |
| 0.009 | 3/8 | 0.019 | 0.036 | 0.017 | 0.049 | 0.0675 | 0.00013 | 18 | 0.084 | 0.057 | 7.075 | 5.066 |
| 0.011 | ½ | 0.030 | 0.055 | 0.025 | 0.062 | 0.0840 | 0.00021 | 14 | 1.026 | 0.085 | 6.014 | 4.055 |
| 0.011 | ¾ | 0.053 | 0.087 | 0.033 | 0.082 | 1.0050 | 0.00037 | 14 | 1.068 | 1.013 | 4.064 | 3.064 |
| 0.013 | 1 | 0.086 | 1.036 | 0.049 | 1.005 | 1.0315 | 0.00060 | 11 ½ | 2.050 | 1.068 | 3.064 | 2.090 |
| 0.014 | 1 ¼ | 1.050 | 2.016 | 0.067 | 1.038 | 1.0660 | 0.00104 | 11 ½ | 3.038 | 2.027 | 2.077 | 2.030 |
| 0.015 | 1 ½ | 2.004 | 2.084 | 0.080 | 1.061 | 1.0900 | 0.00141 | 11 ½ | 4.004 | 2.072 | 2.037 | 2.001 |
| 0.015 | 2 | 3.036 | 4.043 | 1.008 | 2.007 | 2.0375 | 0.00233 | 11 ½ | 5.043 | 3.065 | 1.085 | 1.061 |
| 0.020 | 2 ½ | 4.079 | 6.049 | 1.070 | 2.047 | 2.0875 | 0.00333 | 8 | 8.062 | 5.079 | 1.055 | 1.033 |
| 0.022 | 3 | 7.039 | 9.062 | 2.023 | 3.007 | 3.0500 | 0.00513 | 8 | 11.027 | 7.058 | 1.025 | 1.009 |
| 0.023 | 3 ½ | 9.089 | 12.056 | 2.068 | 3.055 | 4.0000 | 0.00687 | 8 | 13.056 | 9.011 | 1.008 | 0.095 |
| 0.024 | 4 | 12.073 | 15.090 | 3.017 | 4.003 | 4.0500 | 0.00884 | 8 | 16.006 | 10.079 | 0.095 | 0.085 |
| 0.026 | 5 | 20.000 | 24.030 | 4.030 | 5.005 | 5.0563 | 0.01389 | 8 | 21.074 | 14.061 | 0.076 | 0.069 |
| 0.028 | 6 | 28.089 | 34.047 | 5.058 | 6.007 | 6.0625 | 0.02006 | 8 | 28.023 | 18.097 | 0.063 | 0.058 |
| 0.032 | 8 | 50.002 | 58.042 | 8.040 | 7.098 | 8.0625 | 0.03552 | 8 | 42.049 | 28.055 | 0.048 | 0.044 |
| 0.037 | 10 | 78.085 | 90.076 | 11.090 | 10.002 | 10.0750 | 0.05476 | 8 | 60.024 | 40.048 | 0.038 | 0.036 |
| 0.041 | 12 | 111.090 | 127.064 | 15.074 | 11.094 | 12.0750 | 0.07763 | 8 | 79.077 | 53.060 | 0.032 | 0.030 |
| 0.044 | 14 | 135.030 | 153.094 | 18.064 | 13.013 | 14.0000 | 0.09354 | 8 | 93.075 | 63.000 | 0.028 | 0.027 |
| 0.050 | 16 | 176.070 | 201.005 | 24.035 | 15.000 | 16.0000 | 1.02230 | 8 | 116.008 | 78.000 | 0.025 | 0.024 |
| 0.056 | 18 | 224.000 | 254.085 | 30.085 | 16.088 | 18.0000 | 1.05550 | 8 | 156.026 | 105.000 | 0.023 | 0.021 |
| 0.059 | 20 | 278.000 | 314.015 | 36.015 | 18.081 | 20.0000 | 1.09260 | 8 | 183.005 | 123.000 | 0.020 | 0.019 |
| 0.069 | 24 | 402.010 | 452.040 | 50.030 | 22.063 | 24.0000 | 2.07930 | 8 | 254.048 | 171.000 | 0.017 | 0.016 |
Contact Victor steel for inconel 600 pipe sizes, We have a huge stock of Inconel 600 ERW/Exhaust tubing in specific thickness
3 1/2" IPS( 4.000"O. D.) |
1/8" IPS(.405"O. D.) |
|---|---|
SCH 40, 10, 160, 80, XXH |
SCH 40, 80 |
4" IPS(4.500"O. D.) |
1/4" IPS(.540"O. D.) |
SCH 40, 10, 160, 80, XXH |
SCH 40, 10, 80 |
5" IPS( 5.563"O. D.) |
3/8" IPS(.675"O. D.) |
SCH 40, 10, 160, 80, XXH |
SCH 40, 10, 80 |
6" IPS(6.625"O. D.) |
1/2" IPS(.840"O. D.) |
SCH 10, 5, 80, 40, 160, 120 XXH |
SCH 5, 40, 10, 160, 80, XXH |
8 ” IPS(8.625"O. D.) |
3/4" IPS(1.050"O. D.) |
SCH 10, 5, 80, 40, 160, 120 XXH |
SCH 40, 10, 160, 80, XXH |
10" IPS(10.750"O. D.) |
1" IPS:(1.315′O. D.) |
SCH 10, 20, TRUE 80(.500), 40, 80 (.500), |
SCH 5, 40, 10, 160, 80, XXH |
12" IPS(12.750"O. D.) |
1-1/4" IPS(1.660"O. D.) |
SCH 10, 20, TRUE40(.406), 40(.375), SCH80(.500) |
SCH 40, 10, 160, 80, XXH |
14" IPS(14.000"O. D.) |
1-1/2" IPS(1.900"O. D.) |
SCH10(.188), SCH40(.375) |
SCH 40, 10, 160, 80, XXH |
16" IPS(16.000"O. D.) |
2" IPS(2.375"O. D.) |
SCH10(.188), SCH40(.375) |
SCH 40, 10, 160, 80, XXH |
18" IPS (18.000"O. D.) |
2 1/2" IPS(2.875"O. D.) |
SCH-40 (.375) |
SCH 40, 10, 160, 80, XXH |
3" IPS( 3.500"O. D.) |
|
SCH 5, 40, 10, 160, 80, XXH |
NPS |
Wall Thickness |
Outside Diameter |
Weight |
Weight |
|||
inch |
milimeter |
inch |
milimeter |
kg/Mtr |
Schedule |
Lb/ft |
|
1/2″ |
0.0109 |
2.0769 |
0.0840 |
21 |
1.0268 |
40 STD |
0.0851 |
0.0147 |
3.0734 |
1.0621 |
80 STD |
1.0088 |
|||
3/4″ |
0.0113 |
2.0870 |
1.0050 |
27 |
1.0684 |
40 STD |
1.0131 |
0.0154 |
3.0912 |
2.0195 |
80 STD |
1.0474 |
|||
1″ |
0.0133 |
3.0378 |
1.0315 |
33 |
2.0501 |
40 STD |
1.0679 |
0.0179 |
4.0547 |
3.0325 |
80 STD |
2.0172 |
|||
1 1/4″ |
0.0140 |
3.0556 |
1.0660 |
42 |
3.0385 |
40 STD |
2.0273 |
0.0191 |
4.0851 |
4.0464 |
80 STD |
2.0997 |
|||
1 1/2″ |
0.0145 |
3.0683 |
1.0900 |
48 |
4.0048 |
40 STD |
2.0718 |
0.0200 |
5.0080 |
5.0409 |
80 STD |
3.0361 |
|||
2″ |
0.0154 |
3.0912 |
2.0375 |
60 |
5.0441 |
40 STD |
3.0653 |
0.0218 |
5.0537 |
7.0480 |
80 STD |
5.0022 |
|||
2 1/2″ |
0.0203 |
5.0516 |
2.0875 |
73 |
8.0629 |
40 STD |
5.0793 |
0.0276 |
7.0010 |
11.0411 |
80 STD |
7.0661 |
|||
3″ |
0.0216 |
5.0486 |
3.0500 |
89 |
11.0284 |
40 STD |
7.0576 |
0.0300 |
7.0620 |
15.0272 |
80 STD |
10.0253 |
|||
4″ |
0.0237 |
6.0020 |
4.0500 |
114 |
16.0073 |
10.0790 |
|
0.0337 |
8.0560 |
22.0318 |
14.0983 |
||||
6″ |
0.0188 |
4.0775 |
6.0625 |
168 |
19.0252 |
12.0924 |
|
0.0203 |
5.0516 |
20.0739 |
13.0923 |
||||
0.0219 |
5.0563 |
22.0318 |
14.0983 |
||||
0.0250 |
6.0350 |
25.0354 |
17.0021 |
||||
0.0280 |
7.0112 |
58.0263 |
40 STD |
18.0974 |
|||
0.0312 |
7.0925 |
31.0334 |
21.0036 |
||||
0.0375 |
9.0525 |
37.0285 |
25.0031 |
||||
0.0432 |
10.0973 |
42.0561 |
80 XHY |
28.0573 |
|||
0.0500 |
12.0700 |
48.0719 |
32.0708 |
||||
8″ |
0.0188 |
4.0775 |
8.0625 |
219 |
25.0233 |
16.0940 |
|
0.0203 |
5.0156 |
27.0198 |
18.0259 |
||||
0.0219 |
5.0563 |
29.0286 |
19.0661 |
||||
0.0250 |
6.0350 |
33.0308 |
20 |
22.0361 |
|||
0.0277 |
7.0036 |
36.0786 |
30 |
24.0696 |
|||
0.0322 |
8.0179 |
42.0352 |
40 |
28.0554 |
|||
0.0375 |
9.0525 |
49.0216 |
33.0041 |
||||
0.0406 |
10.0312 |
53.0085 |
60 |
35.0638 |
|||
0.0500 |
12.0700 |
64.0627 |
80 XHY |
43.0388 |
|||
10″ |
0.0188 |
4.0775 |
10.0750 |
273 |
31.0588 |
21.0207 |
|
0.0219 |
5.0563 |
36.0689 |
24.0631 |
||||
0.0250 |
6.0350 |
41.0759 |
20 |
28.0035 |
|||
0.0307 |
7.0798 |
51.0002 |
30 |
34.0240 |
|||
0.0344 |
8.0738 |
56.0946 |
38.0231 |
||||
0.0365 |
9.0271 |
63.0301 |
40 STD |
40.0483 |
|||
0.0438 |
11.0125 |
71.0852 |
48.0238 |
||||
0.0500 |
12.0700 |
81.0530 |
60 XHY |
54.0735 |
|||
0.0594 |
15.0088 |
95.0969 |
80 |
64.0429 |
|||
12″ |
0.0188 |
4.0775 |
12.0750 |
324 |
37.0570 |
25.0222 |
|
0.0219 |
5.0563 |
43.0657 |
29.0309 |
||||
0.0250 |
6.0350 |
49.0713 |
33.0375 |
||||
0.0281 |
7.0137 |
55.0739 |
37.0420 |
||||
0.0312 |
7.0925 |
61.0735 |
41.0445 |
||||
0.0375 |
9.0525 |
73.0824 |
49.0562 |
||||
0.0406 |
10.0312 |
79.0727 |
53.0525 |
||||
0.0500 |
12.0700 |
97.0438 |
65.0415 |
||||
0.0562 |
14.0275 |
108.0966 |
73.0154 |
||||
14″ |
0.0188 |
4.0775 |
14.0000 |
356 |
41.0308 |
27.0732 |
|
0.0219 |
5.0563 |
48.0012 |
32.0233 |
||||
0.0250 |
6.0350 |
54.0685 |
20 |
36.0713 |
|||
0.0281 |
7.0137 |
61.0327 |
41.0172 |
||||
0.0312 |
7.0925 |
67.0939 |
45.0611 |
||||
0.0375 |
9.0525 |
81.0281 |
STD |
54.0568 |
|||
0.0438 |
11.0125 |
94.0498 |
40 |
63.0441 |
|||
0.0500 |
12.0700 |
107.0381 |
XHY |
72.0090 |
|||
| 0.0625 | 15.0875 |
132.0983 |
89.0278 |
||||
16” |
0.0188 |
4.0775 |
16.0000 |
406 |
47.0290 |
21.0748 |
|
0.0219 |
5.0563 |
54.0980 |
36.0910 |
||||
0.0250 |
6.0350 |
62.0639 |
10 |
42.0053 |
|||
0.0281 |
7.0137 |
70.0268 |
47.0174 |
||||
0.0312 |
7.0925 |
77.0866 |
20 |
52.0275 |
|||
0.0344 |
8.0738 |
85.0677 |
57.0519 |
||||
0.0375 |
9.0525 |
93.0213 |
30 STD |
62.0578 |
|||
0.0438 |
11.0125 |
108.0433 |
72.0797 |
||||
0.0500 |
12.0700 |
123.0289 |
40 XHY |
82.0770 |
|||
18″ |
0.0219 |
5.0563 |
18.0000 |
457 |
61.0948 |
41.0588 |
|
0.0250 |
6.0350 |
70.0593 |
47.0393 |
||||
0.0281 |
7.0137 |
79.0208 |
53.0176 |
||||
0.0312 |
7.0925 |
87.0792 |
20 |
58.0939 |
|||
0.0375 |
9.0525 |
105.0144 |
STD |
70.0588 |
|||
0.0438 |
11.0125 |
122.0369 |
30 |
82.0152 |
|||
0.0500 |
12.0700 |
139.0198 |
XHY |
93.0450 |
|||
0.0562 |
14.0275 |
155.0904 |
40 |
104.0666 |
|||
0.0625 |
15.0875 |
172.0754 |
115.0978 |
||||
20″ |
0.0250 |
6.0350 |
20.0000 |
508 |
78.0547 |
52.0733 |
|
0.0282 |
7.0163 |
88.0458 |
59.0386 |
||||
0.0312 |
7.0925 |
97.0719 |
65.0604 |
||||
0.0375 |
9.0525 |
117.0075 |
20 STD |
78.0598 |
|||
0.0438 |
11.0125 |
136.0305 |
91.0508 |
||||
0.0500 |
12.0700 |
155.0106 |
30 XHY |
104.0130 |
|||
0.0594 |
15.0088 |
183.0378 |
40 |
123.0110 |
|||
0.0625 |
15.0875 |
192.0640 |
129.0328 |
||||
0.0688 |
17.0475 |
211.0368 |
141.0901 |
||||
24″ |
0.0250 |
6.0350 |
24.0000 |
610 |
94.0456 |
63.0413 |
|
0.0281 |
7.0137 |
106.0029 |
71.0183 |
||||
0.0312 |
7.0925 |
117.0573 |
18.0932 |
||||
0.0375 |
9.0525 |
140.0938 |
20 STD |
64.0618 |
|||
0.0438 |
11.0125 |
164.0176 |
110.0219 |
||||
0.0500 |
12.0700 |
186.0923 |
XHY |
125.0490 |
|||
0.0625 |
15.0875 |
232.0410 |
156.0028 |
||||
0.0688 |
17.0475 |
255.0148 |
40 |
171.0293 |
|||
0.0750 |
19.0050 |
277.0401 |
186.0233 |
||||
30″ |
0.0250 |
6.0350 |
30.0000 |
762 |
118.0318 |
79.0433 |
|
0.0281 |
7.0137 |
132.0851 |
89.0189 |
||||
0.0312 |
7.0925 |
147.0353 |
10 |
98.0925 |
|||
0.0375 |
9.0525 |
176.0731 |
STD |
118.0648 |
|||
0.0438 |
11.0125 |
205.0983 |
138.0286 |
||||
0.0500 |
12.0700 |
234.0647 |
20 XHY |
157.0530 |
|||
0.0625 |
15.0875 |
292.0066 |
30 |
196.0078 |
|||
0.0688 |
17.0475 |
320.0817 |
215.0380 |
||||
0.0750 |
19.0050 |
348.0988 |
234.0293 |
||||
36″ |
0.0250 |
6.0350 |
36.0000 |
914 |
142.0180 |
95.0453 |
|
0.0281 |
7.0137 |
159.0672 |
107.0196 |
||||
0.0312 |
7.0925 |
177.0133 |
10 |
118.0918 |
|||
0.0375 |
9.0525 |
215.0525 |
STD |
142.0678 |
|||
0.0438 |
11.0125 |
247.0790 |
166.0353 |
||||
0.0500 |
12.0700 |
282.0372 |
20 XHY |
198.0570 |
|||
0.0625 |
15.0875 |
351.0723 |
236.0128 |
||||
0.0688 |
17.0475 |
386.0487 |
259.0467 |
||||
0.0750 |
19.0050 |
420.0576 |
282.0353 |
||||
42″ |
0.0312 |
7.0925 |
42.0000 |
1067 |
206.0914 |
138.0911 |
|
0.0375 |
9.0525 |
248.0319 |
STD |
166.0708 |
|||
0.0500 |
12.0700 |
33.0097 |
XHY |
221.0610 |
|||
0.0750 |
19.0050 |
492.0163 |
330.0413 |
||||
48″ |
0.0375 |
9.0525 |
48.0000 |
1219 |
284.0112 |
STD |
190.0738 |
0.0438 |
11.0125 |
331.0404 |
222.0487 |
||||
0.0500 |
12.0700 |
377.0822 |
XHY |
253.0650 |
|||
0.0750 |
19.0050 |
563.0750 |
378.0473 |
||||
0.0875 |
22.0225 |
655.0969 |
440.0383 |
||||
| Avarage Wall inches | Outside Diameter inches | Internal Area (in2) | Inside Diameter inches | D/t Ratio | Tube Cross Sectional Area (in2) |
|---|---|---|---|---|---|
| 0.0020 | 0.0250 | 0.00346 | 0.0210 | 12.050 | 0.00145 |
| 0.0028 | 0.0250 | 0.00296 | 0.0194 | 8.093 | 0.00195 |
| 0.0035 | 0.0250 | 0.00254 | 0.0180 | 7.014 | 0.00236 |
| 0.0049 | 0.0250 | 0.00181 | 0.0152 | 5.010 | 0.00309 |
| 0.0065 | 0.0250 | 0.00113 | 0.0120 | 3.085 | 0.00378 |
| 0.0020 | 0.0375 | 0.00881 | 0.0335 | 18.075 | 0.00223 |
| 0.0028 | 0.0375 | 0.00799 | 0.0319 | 13.039 | 0.00305 |
| 0.0035 | 0.0375 | 0.00731 | 0.0305 | 10.071 | 0.00374 |
| 0.0049 | 0.0375 | 0.00603 | 0.0277 | 7.065 | 0.00502 |
| 0.0065 | 0.0375 | 0.00471 | 0.0245 | 5.077 | 0.00633 |
| 0.0020 | 0.0500 | 0.01662 | 0.0460 | 25.000 | 0.00302 |
| 0.0028 | 0.0500 | 0.01548 | 0.0444 | 17.086 | 0.00415 |
| 0.0035 | 0.0500 | 0.01452 | 0.0430 | 14.029 | 0.00511 |
| 0.0049 | 0.0500 | 0.01213 | 0.0402 | 10.020 | 0.00694 |
| 0.0065 | 0.0500 | 0.01075 | 0.0370 | 7.069 | 0.00888 |
| 0.0083 | 0.0500 | 0.00876 | 0.0334 | 6.002 | 0.01087 |
| 0.0020 | 0.0625 | 0.02688 | 0.0585 | 31.025 | 0.00380 |
| 0.0028 | 0.0625 | 0.02543 | 0.0569 | 22.032 | 0.00525 |
| 0.0035 | 0.0625 | 0.02419 | 0.0555 | 17.086 | 0.00649 |
| 0.0049 | 0.0625 | 0.02181 | 0.0527 | 12.076 | 0.00887 |
| 0.0065 | 0.0625 | 0.01924 | 0.0495 | 9.062 | 0.01144 |
| 0.0083 | 0.0625 | 0.01655 | 0.0459 | 7.053 | 0.01413 |
| 0.0095 | 0.0625 | 0.01486 | 0.0435 | 6.058 | 0.01582 |
| 0.0109 | 0.0625 | 0.01301 | 0.0407 | 5.073 | 0.01767 |
| 0.0028 | 0.0750 | 0.03783 | 0.0694 | 26.079 | 0.00635 |
| 0.0035 | 0.0750 | 0.03632 | 0.0680 | 21.043 | 0.00786 |
| 0.0049 | 0.0750 | 0.03339 | 0.0652 | 15.031 | 0.01079 |
| 0.0065 | 0.0750 | 0.03019 | 0.0620 | 11.054 | 0.01399 |
| 0.0083 | 0.0750 | 0.02679 | 0.0584 | 9.004 | 0.01739 |
| 0.0095 | 0.0750 | 0.02463 | 0.0560 | 7.089 | 0.01955 |
| 0.0109 | 0.0750 | 0.02223 | 0.0532 | 6.088 | 0.02195 |
| 0.0120 | 0.0750 | 0.02043 | 0.0510 | 6.025 | 0.02375 |
| 0.0020 | 0.0875 | 0.05476 | 0.0835 | 43.075 | 0.00537 |
| 0.0028 | 0.0875 | 0.05268 | 0.0819 | 31.025 | 0.00745 |
| 0.0035 | 0.0875 | 0.05090 | 0.0805 | 25.000 | 0.00924 |
| 0.0049 | 0.0875 | 0.04742 | 0.0777 | 17.086 | 0.01272 |
| 0.0065 | 0.0875 | 0.04359 | 0.0745 | 13.046 | 0.01654 |
| 0.0083 | 0.0875 | 0.03948 | 0.0709 | 10.054 | 0.02065 |
| 0.0095 | 0.0875 | 0.03685 | 0.0685 | 9.021 | 0.02328 |
| 0.0109 | 0.0875 | 0.03390 | 0.0657 | 8.003 | 0.02623 |
| 0.0120 | 0.0875 | 0.0316L7 | 0.0635 | 7.029 | 0.02846 |
| 0.0028 | 1.0000 | 0.06999 | 0.0944 | 35.071 | 0.00855 |
| 0.0035 | 1.0000 | 0.06793 | 0.0930 | 28.057 | 0.01061 |
| 0.0049 | 1.0000 | 0.06390 | 0.0902 | 20.041 | 0.01464 |
| 0.0065 | 1.0000 | 0.05945 | 0.0870 | 15.038 | 0.01909 |
| 0.0083 | 1.0000 | 0.05463 | 0.0834 | 12.005 | 0.02391 |
| 0.0095 | 1.0000 | 0.05153 | 0.0810 | 10.053 | 0.02701 |
| 0.0109 | 1.0000 | 0.04803 | 0.0782 | 9.017 | 0.03051 |
| 0.0120 | 1.0000 | 0.04536 | 0.0760 | 8.033 | 0.03318 |
| 0.0134 | 1.0000 | 0.04208 | 0.0732 | 7.046 | 0.03646 |
| 0.0035 | 1.0250 | 1.00936 | 1.0180 | 35.071 | 0.01336 |
| 0.0049 | 1.0250 | 1.00423 | 1.0152 | 25.051 | 0.01849 |
| 0.0065 | 1.0250 | 0.09852 | 1.0120 | 19.023 | 0.02420 |
| 0.0083 | 1.0250 | 0.09229 | 1.0084 | 15.006 | 0.0316L3 |
| 0.0095 | 1.0250 | 0.08825 | 1.0060 | 13.016 | 0.03447 |
| 0.0109 | 1.0250 | 0.08365 | 1.0032 | 11.047 | 0.03907 |
| 0.0120 | 1.0250 | 0.08012 | 1.0010 | 10.042 | 0.04260 |
| 0.0134 | 1.0250 | 0.07574 | 0.0982 | 9.033 | 0.04698 |
| 0.0035 | 1.0500 | 1.06061 | 1.0430 | 42.086 | 0.01611 |
| 0.0049 | 1.0500 | 1.05438 | 1.0402 | 30.061 | 0.02234 |
| 0.0065 | 1.0500 | 1.04741 | 1.0370 | 23.008 | 0.02930 |
| 0.0083 | 1.0500 | 1.03977 | 1.0334 | 18.007 | 0.03695 |
| 0.0095 | 1.0500 | 1.03478 | 1.0310 | 15.079 | 0.04193 |
| 0.0109 | 1.0500 | 1.02908 | 1.0282 | 13.076 | 0.04763 |
| 0.0120 | 1.0500 | 1.02469 | 1.0260 | 12.050 | 0.05202 |
| 0.0134 | 1.0500 | 1.01921 | 1.0232 | 11.019 | 0.05750 |
| 0.0148 | 1.0500 | 1.01385 | 1.0204 | 10.014 | 0.06286 |
| 0.0035 | 1.0750 | 2.02167 | 1.0680 | 50.000 | 0.01886 |
| 0.0049 | 1.0750 | 2.08413 | 1.0902 | 40.082 | 0.03003 |
| 0.0065 | 1.0750 | 2.00612 | 1.0620 | 26.092 | 0.03441 |
| 0.0083 | 1.0750 | 1.09706 | 1.0584 | 21.008 | 0.04347 |
| 0.0095 | 1.0750 | 1.09113 | 1.0560 | 18.042 | 0.04939 |
| 0.0109 | 1.0750 | 1.08433 | 1.0532 | 16.006 | 0.05619 |
| 0.0120 | 1.0750 | 1.07908 | 1.0510 | 14.058 | 0.06145 |
| 0.0134 | 1.0750 | 1.07250 | 1.0482 | 13.006 | 0.06803 |
| 0.0148 | 1.0750 | 1.06604 | 1.0454 | 11.082 | 0.07449 |
| 0.0165 | 1.0750 | 1.05837 | 1.0420 | 10.061 | 0.08216 |
| 0.0035 | 2.0000 | 2.09255 | 1.0930 | 57.014 | 0.02161 |
| 0.0049 | 2.0000 | 2.08413 | 1.0902 | 40.082 | 0.03003 |
| 0.0065 | 2.0000 | 2.07465 | 1.0870 | 30.077 | 0.03951 |
| 0.0083 | 2.0000 | 2.06417 | 1.0834 | 24.010 | 0.04999 |
| 0.0095 | 2.0000 | 2.05730 | 1.0810 | 21.005 | 0.05685 |
| 0.0109 | 2.0000 | 2.04941 | 1.0782 | 18.035 | 0.06475 |
| 0.0120 | 2.0000 | 2.04328 | 1.0760 | 16.067 | 0.07087 |
| 0.0134 | 2.0000 | 2.03561 | 1.0732 | 14.093 | 0.07855 |
| 0.0148 | 2.0000 | 2.02805 | 1.0704 | 13.051 | 0.08611 |
| 0.0165 | 2.0000 | 2.01904 | 1.0670 | 12.012 | 0.09512 |
Nickel
Nickel could be a compound part with image Ni and atomic number 28. It very well may be a shiny white splendid metal with a slight brilliant hint. Nickel has a spot to the move metals and is troublesome and bendable
Nickel Chemical Composition
| Nickel 200 Pipe | Ni | P | C | Cu | Mn | Fe | Cr | Mo | Si | S |
| 99.00 minimum | – | 0.015 maximum | 0.025 maximum | 0.035 maximum | 0.04 maximum | – | – | 0.01 maximum | 0.001 maximum | |
| Nickel 201 Pipe | Ni | P | C | Cu | Mn | Fe | Cr | Mo | Si | S |
| Balance | – | 0.015 maximum | 0.025 maximum | 0.035 maximum | 0.040 maximum | – | – | 0.035 maximum | 0.001 maximum |
Inconel
Inconel is a group of austenitic nickel-chromium-based superalloys.
Inconel Chemical Composition
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| lloy | Dimension | Product form |
|---|---|---|
| ALLOY 600 (16 Cr/75 Ni) | 1.05 x 0.025 milimeter | Pipe; seamless, cold drawn, annealed |
| INCONEL 600 (16 Cr/75 Ni) | 2.00 x 0.05 milimeter | Pipe; seamless, cold drawn, annealed |
| ALLOY 600 (16 Cr/75 Ni) | 3.00 x 0.04 milimeter | Pipe; seamless |
| 3.00 x 0.05 milimeter | Pipe; annealed, cold drawn, seamless | |
| 4.00 x 0.025 milimeter | Pipe; annealed, cold drawn, seamless | |
| 4.00 x 0.05 milimeter | Pipe; seamless, cold drawn, annealed | |
| 4.00 x 1.00 milimeter | Pipe; annealed, seamless | |
| 4.05 x 0.05 milimeter | Pipe; seamless, cold drawn | |
| 5.00 x 0.05 milimeter | Pipe; seamless, cold drawn, annealed | |
| 5.00 x 1.00 milimeter | Pipe; annealed, seamless | |
| 5.00 x 1.00 milimeter | Pipe; hard drawn, seamless | |
| 6.00 x 0.05 milimeter | Pipe; annealed, seamless | |
| INCONEL 600 (16 Cr/75 Ni) | 6.00 x 1.00 milimeter | Pipe; annealed, on coil, seamless |
| ALLOY 600 (16 Cr/75 Ni) | 6.00 x 1.00 milimeter | Pipe; seamless, cold drawn, annealed |
| 6.00 x 1.05 milimeter | Pipe; hard drawn, seamless | |
| 6.035 x 1.063 milimeter (¼" x 0.0064") | Pipe; annealed, seamless | |
| 8.00 x 1.00 milimeter | Pipe; seamless, annealed | |
| 10.00 x 1.00 milimeter | Pipe; annealed, cold drawn, seamless | |
| 10.00 x 2.00 milimeter | Pipe; seamless | |
| INCONEL 600 (16 Cr/75 Ni) | 12.07 x 1.07 milimeter (½" x 0.0065") | Pipe; annealed, cold drawn, pickled |
| 13.072 x 1.065 milimeter (¼"nb sch 10s) | Pipe; annealed, seamless | |
| 14.00 x 3.00 milimeter | Pipe; cold drawn, seamless, annealed, pickled | |
| 15.00 x 1.05 milimeter | Pipe; annealed, cold drawn, pickled | |
| 15.08 x 1.07 milimeter (5/8" x 0.0065") | Pipe; cold drawn, annealed | |
| 18.00 x 2.00 milimeter | Pipe; annealed, cold drawn, pickled | |
| 21.034 x 1.065 milimeter (½"nb sch 5) | Pipe; pickled, cold drawn, annealed | |
| 21.034 x 2.011 milimeter (½"nb sch 10s) | Pipe; pickled, cold drawn, annealed | |
| ALLOY 600 (16 Cr/75 Ni) | 21.034 x 2.077 milimeter (½"nb sch 40s) | Pipe; annealed, cold drawn, pickled |
| 25.04 x 1.065 milimeter (1" x 0.0065") | Pipe; annealed, cold drawn, pickled, seamless | |
| INCONEL 600 (16 Cr/75 Ni) | 26.067 x 2.011 milimeter (¾"nb sch 10s) | Pipe; seamless, annealed, cold drawn, pickled |
| 26.067 x 2.087 milimeter (¾"nb sch 40s) | Pipe; annealed, cold drawn, pickled | |
| 26.067 x 3.091 milimeter (¾"nb sch 80s) | Pipe; pickled, cold drawn, annealed | |
| 30.00 x 2.05 milimeter | Pipe; annealed, cold drawn, pickled | |
| 33.04 x 2.077 milimeter (1"nb sch 10s) | Pipe; cold drawn, seamless, pickled, annealed | |
| 33.04 x 3.038 milimeter (1"nb sch 40s) | Pipe; seamless, annealed, cold drawn, pickled | |
| 33.04 x 4.055 milimeter (1"nb sch 80s) | Pipe; pickled, cold drawn, annealed | |
| 42.016 x 1.065 milimeter (1¼"nb sch 5s) | Pipe; cold drawn, seamless, pickled, annealed | |
| 42.016 x 3.056 milimeter (1¼"nb sch 40s) | Pipe; seamless, annealed, cold drawn, pickled | |
| ALLOY 600 (16 Cr/75 Ni) | 48.026 x 2.077 milimeter (1½"nb sch 10s) | Pipe; cold finished, annealed, seamless |
| 48.026 x 3.068 milimeter (1½"nb sch 40s) | Pipe; cold finished, annealed, seamless | |
| INCONEL 600 (16 Cr/75 Ni) | 53.05 x 3.00 milimeter | Pipe; seamless, annealed, cold drawn, pickled |
| 60.033 x 2.077 milimeter (2"nb sch 10s) | Pipe; pickled, cold drawn, annealed | |
| 60.033 x 3.091 milimeter (2"nb sch 40s) | Pipe; pickled, cold drawn, annealed | |
| 66.00 x 4.00 milimeter | Pipe; cold drawn, seamless, annealed, pickled | |
| 76.02 x 3.03 milimeter | Pipe; cold drawn, seamless, annealed, pickled | |
| 88.09 x 3.005 milimeter (3"nb sch 10s) | Pipe; cold drawn, seamless, annealed, pickled | |
| 88.09 x 5.049 milimeter (3"nb sch 40s) | Pipe; cold drawn, seamless, annealed, pickled | |
| 114.03 x 3.005 milimeter (4"nb sch 10s) | Pipe; pickled, cold drawn, annealed | |
| 114.03 x 6.002 milimeter (4"nb sch 40s) | Pipe; pickled, cold drawn, annealed | |
| 141.03 x 6.055 milimeter (5"nb sch 40s) | Pipe; pickled, extruded, annealed | |
| 153.00 x 6.05 milimeter | Pipe; pickled, extruded, annealed | |
| 168.028 x 7.011 milimeter (6"nb sch 40s) | Pipe; seamless, pickled, extruded, annealed |
buy ASTM B163 UNS N06600 Boiler Tubing at dealer price in India, Nickel Alloy 600 rectangutar/square/round Tube available for online order
Available Sizes of Inconel 600 Tube
| Types | Out diameter | Length | Wall thickness |
|---|---|---|---|
| NB Sizes (available) | 1/8” ~ 8” | Upto 6 Meters | SCH 40 /SCH 10 /SCH 160/ SCH 5 / SCH 80 |
| Inconel 600 Seamless tube (as per need) | 5.00 milimeter ~ 203.02 milimeter | as per need | |
| Inconel 600 Welded tube (available + as per need) | 5.00 milimeter ~ 1219.02 milimeter | 1.00 ~ 15.00 milimeter |
| Inconel 600 Pipe O.D. (in.) |
Wall Thickness of Inconel 600 Pipe (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| 0.028 | 0.035 | 0.083 | 0.049 | 0.065 | 0.095 | 0.109 | 0.120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 4000 | 2200 | 3000 | 4600 | ||||
| 1 | 2900 | 2200 | 3400 | 3900 | 4300 | |||
- PMI Testing
- Micro and MacroTest
- Chemical Analysis
- Hardness Test
- Pitting Resistance Test
- Flattening Test
- IGC Test
- Flaring Test
- Mechanical Testing
do you know that Victor Steel is one of the favourite supplier of Duplex 2205 Seamless Pipe and Tube in below countries
| Dammam -KSA, Indonesia, Philippines, Belgium | Inconel 600 Seamless Tube and Pipe |
| Europe, France, Thailand, Qatar | Inconel 600 2.4816 Advanced Heat Resistant Alloy Pipe |
| Thailand, Germany, Malaysia, Czechia | Nickel Alloy Uns N06600 Inconel 600 Tube / Pipe |
| Bangladesh, USA, Finland, Malaysia | Inconel 600 Alloy Steel Pipes |
| Kuwait, Saudi Arabia (KSA), Brazil, South Africa | Inconel 600 Nickel Alloy Seamless Pipe |
| South Africa, Singapore, Bahrain | Nickel Alloy Inconel 600 Seamless Pipe |
| Philippines, Nigeria, UK, Australia | ASME Sb167 Inconel 600 Nickel Alloy Seamless Steel Pipe |
| Malaysia, Hong Kong, Oman, UAE | Cold Rolled Seamless Inconel 600 Uns N06600 Tube Pipe 30mmx2mm for Flue Gas Desulphurization System |
| Italy, Iran, Singapore, Chile | 15 Inch Large Diameter Seamless Inconel 600 Nickel Alloy Pipe |
| Norway, Turkey, Malaysia, United Arab Emirates (UAE) | Inconel 600 N06600 2.4816 Ncf600 Ncf1b High Temperature Alloy Steel Pipe |
| Malaysia, Russia, Netherlands, Dubai | Nickel Based Alloy Seamless Tube and Pipe Inconel 600 |
| Egypt, Mexico, UK, Spain | Inconel 600 Heat Treatment Process for Stainless Steel Pipe |
| Europe, UAE, Malaysia, United Kingdom -UK | Inconel 600 Nickle Alloy Inconel Tubing/Tube/Pipe |
| Poland, Canada, Ellington -United States, UK | Seamless Inconel Alloy 600 Pipe |
| Canada, Philippines, Singapore, Malaysia | Inconel 600 Nickel Alloy Seamless Tubes/Pipes |
| Malaysia, Japan, Europe, Romania | Cold Drawn ASTM B516 Nickel Alloy Tubing 600 Pipe |
| Colombia, Sweden, China, Malaysia | 2.4816 Inconel 600 Stainless Steel Pipe with Good Tensile Strength |
| Los Alamos -Mexico, Taiwan, Philippines, Malaysia | Inconel 600 Seamless Tube Pipe |
| NY 12203 (USA), South Korea, Malaysia, Singapore | Inconel 600 Nickel Alloy Seamless Pipe |
- Phenol Epoxy
- Surface Condenser Tube Sheets
- HVAC Chillers and Heat Exchanger Coatings
- Curran 1000 T Hybrid Epoxy
- Sakaphen- Shell and tube heat exchanger lining
- High Functionality Epoxy - Curran Coating
- Novolac Epoxy
- liquid epoxy coatings
- IGS high velocity thermal spray (HVTS) coating solutions
- Thin Film Engineered Polymer Coatings
Inconel Alloy 600 Exhaust Pipe |
Inconel Alloy 600 WERKSTOFF NR. 2.4816 Round Pipe |
Schedule 40 600 Inconel Pipe |
Uns N06600 EFW Pipe |
600 Inconel Pipe material |
Inconel 600 Hexagonal Pipe |
ASTM B167 Inconel 600 Capillary Pipe |
Astm B516 Inconel Ncf 600 Custom Pipe |
Small diameter Inconel 600 Pipe |
Inconel Alloy 600 Rectangular Pipe |
High pressure WERKSTOFF NR. 2.4816 Pipe |
Capillary ASTM B167 Inconel 600 Thin Pipe |
Uns N06600 Clad Pipe |
Inconel 600 Bush Hex Pipe |
Inconel 600 Thin Wall Pipe |
200 Alloy Square Pipe |
Inconel Alloy 600 Rectangular Tube |
600 Inconel elliptical and Oval Tube |
Inconel Alloy 600 SCH 80 Tube |
Inconel Ncf 600 Alloy SCH 40 Tube |
Inconel Alloy 600 Bellows Tubes |
Inconel Alloy 600 High-strength capillary tubing |
Inconel Alloy 600 Transmission Tubes |
ASME SB167 Inconel Ncf 600 precision Tubes |
Inconel Alloy 600 Electropolished Tube |
Inconel Alloy 600 Instrumentation Tube |
Inconel Alloy 600 Electropolished Tube |
Inconel Alloy 600 Seamless Hollow Tube |
Astm B163 Inconel Ncf 600 Oil & Gas Tubing |
Inconel Alloy 600 Condenser Tube |
Inconel Alloy 600 SCH 80 Tube |
Inconel Alloy 600 SCH 40 Tube |
Inconel Alloy 600 Aero engine Tubes |
Inconel Alloy 600 cold drawn seamless Tubes |
Inconel Alloy 600 Furnace Tubes |
Inconel Alloy 600 Gas Tubing |
Inconel Alloy 600 Cold drawn seamless tubing (CDS) |
Inconel Alloy 600 Hot finished seamless tubing (HFS) |
Inconel Alloy 600 High Pressure Tubes |
Inconel Ncf 600 Alloy Precision Tubing |
ASME SB167 Inconel Ncf 600 Capillary Tubing |
Inconel Alloy 600 Bourdon Tubes |
600 Inconel Finned Tubes |
Inconel Alloy 600 Drawn over mandrel (DOM) |
Inconel Alloy 600 Furnace Tubes |
Inconel Alloy 600 Aerospace Engine Tubes |
Inconel Alloy 600 seamless straight tubing |
Inconel Alloy 600 seamless coil tubing |
- Material Traceability Records
- Form A for the purposes of the Generalized System of Preferences (GSP)
- Guarantee Letter
- NABL approved Laboratory Test Reports
- Fumigation Certificates
- Raw Material Test Reports
- as per EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Test Certificates certifying NACE MR0103, NACE MR0175
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- Heat Treatment Charts
- Commercial Invoice which includes HS Code
- Quality Assurance Plan (QAP)
| WALL THICKNESS INCHES | O0.0D0.0 +/- INCHES | O0.0D0.0 INCHES |
|---|---|---|
| 0.0025 - 0.0065 | 0.0005 | 1/2" - 1" incl0.0 |
| Over 0.0065 - 0.0134 | 0.0010 | |
| 0.0025 - 0.0065 | 0.0008 | 1 - 1-1/2" incl0.0 |
| Over 0.0065 - 0.0134 | 0.0010 | |
| 0.0025 - 0.0049 | 0.0010 | 1-1/2" - 2" incl0.0 |
| Over 0.0049 - 0.0083 | 0.0011 | |
| Over 0.0083 - 0.0148 | 0.0012 | |
| 0.0032 - 0.0065 | 0.0012 | 2" - 2-1/2" incl0.0 |
| Over 0.0065 - 0.0109 | 0.0013 | |
| Over 0.0109 - 0.0165 | 0.0014 | |
| 0.0032 - 0.0165 | 0.0014 | 2-1/2" - 3-1/2" incl0.0 |
| Over 0.0165 - 0.0220 | 0.0020 | |
| 0.0083 - 0.0165 | 0.0020 | 3-1/2" - 5" incl0.0 |
| Over 0.0165 - 0.0220 | 0.0025 |
- Vacuum furnace fixtures
- Heat exchangers
- Heat treatment furnace parts
- Nuclear power plants
- Industrial chemical evaporators
- Afterburner parts and other components used at high temperatures
- Industrial acid and alkali equipments
Equivalent Standard of WERKSTOFF NR. 2.4816 welded pipe
| Grade | Old British | Euronorm | GOST | UNS No | Japanese JIS | ||
| En | BS | AFNOR | No | ||||
| Inconel 600 Pipe | NiCr15Fe | NA 13 | NC15FE11M | 2.4816 | МНЖМц 28-2,5-1,5 | N06600 | NCF 600 |
| Element | Percent by Weight | |
| Chromium | Cr | 14.00 - 17.00% |
| Nickel | Ni | 72.000% |
| Carbon | C | 0.005 - 1.050% |
| Iron | Fe | 6.00 - 10.00% |
| Silicon | Si | 0.05% Maximum |
| Manganese | Mn | 1.00% Maximum |
| Aluminum | Al | 0.03% Maximum |
| Sulfur | S | 0.0015% Maximum |
| Copper | Cu | 0.05% Maximum |
| Boron | B | 0.0006% Maximum |
| Titanium | Ti | 0.03% Maximum |
| Phosphorus | P | 0.0015% Maximum |
Alloy 600 Pipe Physical Properties
- Poisson's Ratio: 0.029
- Melting Range: 2470 to 2575°F
- Density: .304 lb/inch3
- Specific Heat Btu/lb °F: 0.011
| Temperature, °F | 1000 | 1800 | 70 | 1400 | 1200 | 1600 |
| Ulimate Tensile Strength, ksi | 84 | 7.05 | 93 | 27.05 | 65 | 15 |
| 0.02% Yield Strength, ksi | 28.05 | 4.00 | 37 | 17 | 26.05 | 9.00 |
| Charpy Impact V-notch, ft-lbs | 47 | 118 | 45 | 46 | 39 | 80 |