Inconel 718 Pipe

  • Home
  • Inconel 718 Pipe

 

ASTM B163 UNS N07718 Seamless Pipe and tube manufacturer and suppliers in Mumbai, India

Inconel Alloy 718 welded pipe
Inconel Alloy 718 welded pipe
Astm B163 Alloy 718 Seamless Tube
Astm B163 Alloy 718 Seamless Tube
Inconel 718 Welded Tube
Inconel 718 Welded Tube
Inconel 718 Pipe
Inconel 718 Pipe
Inconel 718 Tube
Inconel 718 Tube
Inconel 718 Seamless Pipe
Inconel 718 Seamless Pipe

 

Inconel 718 Tube Suppliers, Know more about Astm B516 Werkstoff Nr.2.4668 Welded Pipe and tube Dimensions, Weight Chart and Price List in India


If Inconel 718 Cold Rolled Coiled Tube is machined in an age hardened condition, then it produces a better finishing of the surface. Whereas, longer tool life is displayed if  Asme Sb163 Uns N07718 Seamless Pipe is produced in an annealed condition. Astm B163 Alloy 718 Seamless Tubes are used in condensers and heat exchangers. Alloy 718 Heat Exchanger Tube covers outside diameter and average wall to minimum wall thickness depending upon the need.


Most of the Inconel 718 Tubing supplies provide these tubes in ATSM 163,516 and ASME SB163,516 specifications due to their excellent weldability. 718 Inconel Bright Annealed Tube are also put through various tests like chemical analysis, rounding procedure, tension test, hardness conversion, and grain size test. A high temperature of 1300 degrees F can be resisted by Nickel Alloy 718 Electropolish Tubes. The tensile strength of Asme Sb516 718 Inconel Welded Tube is 1,35,000 psi 930 MPa and its yield strength is 75,000 psi 482 MPa. Alloy 718 Nickel Tubing is available at a price of Rs. 3,200 per kg in India. This is the cheapest when compared to the manufacturers of the USA who charge Rs. 4500, Japan who charges around Rs. 3500 and Europe who charge around Rs. 3800.

We at Victor Steel provide you these pipes at a competitive price when compared to other manufacturers.

 

Table Of Content

 

Ncf 718 Heat exchanger and Bright Annealed Tube Supplier according to Asme Sb163 Standard

 

Size Chart In Mm of Inconel 718 Capillary Tube
Regular Wall (RW) mm Gauge Extra Thin Wall (XTW) mm Outside Diameter Tolerance mm Ultra Thin Wall (UTW) mm Thin Wall (TW) mm
0.0064 to 0.0089 30 0.0304 to 0.0317
0.0064 to 0.0089 29 o.0330 to 0.0342
0.0076 to 0.0102 28 0.0355 to 0.0368
0.0089 to 0.0115 27 0.0406 to 0.0419 0.0064 to 0.0089
0.0089 to 0.0114 26 0.0457 to 0.0469
0.0115 to 0.0140 25 0.0508 to 0.0520 0.0089 to 0.0114
0.0114 to 0.0140 24 0.0558 to 0.0571 0.0051 to 0.0102 0.0089 to 0.0114
0.0140 to 0.0165 23 0.0635 to 0.0647 0.0051 to 0.0102 0.0089 to 0.0114
0.0140 to 0.0165 22 0.0077 to 0.0102 0.0711 to 0.0723 0.0051 to 0.0102 0.0096 to 0.0121
0.0140 to 0.0165 21 0.0812 to 0.0825 0.0051 to 0.0102 0.0102 to 0.0127
0.0108 to 0.0165 20 0.0901 to 0.0914 0.0108 to 0.0134
0.0166 to 0.0216 19 0.0070 to 0.0108 1.0054 to 1.0079 0.0102 to 0.0140
0.0191 to 0.0241 18 0.0083 to 0.0121 1.0257 to 1.0282 0.0051 to 0.0102 0.0127 to 0.0165
0.0177 to 0.0229 17 0.0083 to 0.0127 1.0460 to 1.0485 0.0057 to 0.0102 0.0115 to 0.0152
0.0204 to 0.0254 16 0.0096 to 0.0133 1.0638 to 1.0663 0.0070 to 0.0121 0.0127 to 0.0165
0.0204 to 0.0254 15 0.0096 to 0.0134 1.0816 to 1.0841 0.0070 to 0.0121 0.0127 to 0.0165
0.0216 to 0.0292 14 0.0114 to 0.0165 2.0082 to 2.0133 0.0076 to 0.0134 0.0165 to 0.0229
0.0267 to 0.0343 13 2.0387 to 2.0438 0.0191 to 0.0267
0.0267 to 0.0321 12 2.0743 to 2.0749
0.0293 to 0.0368 11 3.0023 to 3.0073 0.0216 to 0.0292
0.0318 to 0.0394 10 0.0216 to 0.0292 3.0378 to 3.0429

 

 

What is Inconel 718 pipe?

If you are considering tubes for your business and confused about which one to go with.  Victor Steel has a one-stop solution for it. There are a variety of pipes available in the market. If you are looking at nickel based alloy Inconel 718 Pipe is one of them. Inconel 718 Tubes are hardened using precipitation and are used in applications that require high tensile and yield strength along with good creep rupture properties. Astm B516 Werkstoff Nr.2.4668 Welded Pipe can be easily weld either in annealed condition or in age hardened condition. A soft ended heat affected area is formed if age hardened  Ncf 718 Erw Tube is welded.

 

Inconel 718 pipe and tube

 

Comparing Standards Specification Inconel 718 tube
ASTM Specification AMS 5590, AMS 5589
International Specification WERKSTOFF Nr 2.4668 , UNS N07718
Standard GB, DTD, ASME, AISI, ASTM, TOCT, JIS, NF, SAE, DIN, AMS, DS, EN
Size of Seamless Pipe Wall thickness.: 0.05- 20 milimeter, 4 - 219 milimeter
Size of Welded Pipe 5.0 to 1219.02 milimeter
size of  EFW Pipe 5.0 to 1219.02 milimeter
Seamless Tube Size 3.35 milimeter To 101.6 milimeter OD
 Welded Tube Size 6.35 milimeter To 152 milimeter OD
Bwg & Swg 18 Swg., 14 20 Swg., Swg. Swg., 12 16 Swg., 10 Swg.
Tubing wall thickness 0.020" –0.220", (custom wall thicknesses available)
Pipe Schedule SCH20, XS, STD, XXS, SCH60, SCH140, SCH80, SCH80, SCH5, SCH40S, SCH40, SCH120, SCH10S, SCH10, SCH30, SCH160
Length Standard & Cut length , Single Random, Double Random Pipe
Finish AP (Annealed & Pickled), BA (Bright & Annealed), NO.1, 2B, Polished, MF, HL, NO.4, Mirror finish, BA, 8K etc
End Plain End, Beveled End, Treaded Pipe, Screwed ends
Form Hydraulic, Rectangular, Coiled, Square, Hollow, Round, Straight Pipes/tubes, “U” Shape, Pan Cake Coils, Boiler, LSAWetc.
Application Dairy Pipe, Oil Pipe/tube, Gas Pipe/tube, Fluid Pipe/tube, Boiler Tube, Heat exchanger Tube
Type Seamless /ERW/ EFW / Welded / Fabricated /CDW /DOM/CEW Inconel 718 Pipe
Marking Heat No. (Or as per need.), Thickness, OD, Grade, Standard Length
Value Added Service Expansion and Draw as per needed Length and Size, , Polish (Comilimeterercial and Electro), Machining, Annealed & Pickled Bending Etc.
Specialize in
  • Large Diameter Inconel 718 Pipe
  • Nickel NW 2200 Capillary Tube & Other Odd Size 
  • ASME SB163 Alloy 718 Heat Exchanger & Condenser Tube
Suppliers of
  • Sanyo Special Steel, Japan
  • Sumitomo Metals, Japan
  • Kobe Special Tube, Japan
  • Seah Steel Corporation, Korea
  • Schoeller Bleckmann, Austria
  • Tubacex Tubos Inoxidables S.A., Spain
  • Nippon Steel Corporation, Japan
Test Certificate
  • Under Third Party Inspection
  • Manufacturer Test Certificate 
manufacturing Technique Cold drawn, hot drawn, bright annealed, solid solution, hot extruding
Our stockyard New Delhi, Pimpri-Chinchwad, Abu Dhabi, Howrah, Ankara, Ludhiana, Mumbai, Hyderabad, Montreal, Mexico, Rajkot, Vadodara, Kolkata, Bogota, Ahvaz, Sydney, Lagos, Chennai, Bengaluru, Santiago, Damilimeteram, Karachi, Manama, Nagpur, Kanpur, Gurgaon, Indore, Surat, Riyadh, Ranchi, Jamshedpur, Thiruvananthapuram, Gujarat, London, Calgary, Melbourne, Tau, Bangalore, Ernakulam, Kuwait, Caracas, Janeiro, Tehran, Ahmedabad, Perth, Istanbul, Baroda, Khobar, Courbevoie, Muscat, India, Coimbatore, Noida, Port-of-Spain, Gimhae-si,

 

Inconel 718 Pipe Manufacturer In India
Astm B516 Inconel 718 Instrument Tubing
Astm B516 Inconel 718 Instrument Tubing
Thick Wall Inconel 718 Pipe
Thick Wall Inconel 718 Pipe
DIN NR. 2.4668 Electropolished Pipe
2.4668 Electropolished Pipe
Thin Wall Nickel Alloy 718 Pipe
Thin Wall Inconel 718 Pipe
Alloy 718 Bright Annealed Tube
Alloy 718 Bright Annealed Tube
Inconel 718 Heat Exchanger Tube
Inconel 718 Heat Exchanger Tube
2.4668 Alloy 718 Alloy Polished Pipe
2.4668 Alloy 718 Alloy Polished Pipe
UNS N07718 Coiled Tubing
UNS N07718 Coiled Tubing
ASME SB163 Alloy 718 Exhaust Tubing
ASME SB163 Alloy 718 Exhaust Tubing
Schedule 40 Alloy 718 Pipe
Schedule 40 Alloy 718 Pipe
Astm B516 718 Inconel Welded Tube
Astm B516 718 Inconel Welded Tube
Astm B163 Alloy 718 Exhaust Pipe
Astm B163 Alloy 718 Exhaust Pipe
718 Inconel Welded Pipe
718 Inconel Welded Pipe
ASME SB163 Alloy 718 Seamless Pipe
Astm B163 Inconel Alloy 718 Seamless Pipe
718 Inconel ERW Tubing
718 Inconel ERW Tubing
Alloy 718 Tubing
Alloy 718 Tubing
Small Diameter 2.4668 Alloy 718 Tubing
Small Diameter 2.4668 Alloy 718 Tubing
Schedule 5S Nickel Alloy 718 Pipe
Schedule 5S Nickel Alloy 718 Pipe
UNS N07718 Capillary Tubing
UNS N07718 Capillary Tubing
Inconel Alloy 718 Seamless Tube
Inconel Alloy 718 Seamless Tube
2.4668 Alloy 718 Hollow Pipe
2.4668 Alloy 718 Hollow Pipe
WERKSTOFF NR. 2.4668 Square Pipe
WERKSTOFF NR. 2.4668 Square Pipe
UNS N07718 Round Pipe
ASME SB163 2.4668 Alloy 718 Round Pipe
DIN 2.4668 ERW Pipe
DIN 2.4668 ERW Pipe

 

Asme Sb163 Uns N07718 Seamless Pipe Price in India
Description Inconel 718 pipe Price in india
Inconel 718 Seamless Tube/Pipe US $ 12-18 / kg
Inconel 718 Nickel Alloy Pipe US $ 7.5-40 / kg
Inconel 718 Gh4169 N07718 2.4668 Pipe US $ 100-200 / kg
Inconel 718 Nickel Alloy Seamless Pipe US $ 10-100 / kg
Inconel 718 Pipe (UNS N07718, 2.4668, ALLOY 718) US $ 2400-2600 / Ton
Sb168 Inconel 718 Gh4169 Heat Treatment Welded Pipe US $ 100-200 / kg
Inconel 718 Tube Nickel Alloy 718 Welded Pipe US $ 10000-35000 / Ton
Nickel-Chromium Alloy Steel Pipe (N07718 Inconel 718) US $ 2000-3000 / Ton
Nickel Alloy Inconel 718 Seamless Pipe US $ 10000-30000 / Ton
Inconel 718 Seamless Pipe (FM33) US $ 80-100 / kg

In the event that it's not all that much difficulty, note This is an expected Price of Inconel 718 Pipe in India. Mercifully don't stop for a second to connect with us latest Alloy 718 Tube Price in India. Furthermore compare our Price and other ASME SB163 Inconel 718 Pipe Suppliers in India and China.

 

Dimensional Technical Standard of Inconel Alloy 718 pipe
Nominal Thickness
(in)
MM		 Pipe Size
(in)		 Transverse Areas
(in2)
MM2		 Diameter
(in)
MM
 Volume
(ft3/ft)		 Number of Threads per inch of Screw Weight Length of Pipe
(ft per sq.0 foot of surface)
Internal External Steel Internal External (kg/m) (lb/ft) Internal Surface
(ft)		 External Surface
(ft)
0.007 1/8 0.006 0.013 0.007 0.027 0.0405 0.00004 27 0.036 0.024 14.020 9.043
0.009 ¼ 0.010 0.023 0.013 0.036 0.0540 0.00007 18 0.063 0.042 10.049 7.007
0.009 3/8 0.019 0.036 0.017 0.049 0.0675 0.00013 18 0.084 0.057 7.075 5.066
0.011 ½ 0.030 0.055 0.025 0.062 0.0840 0.00021 14 1.026 0.085 6.014 4.055
0.011 ¾ 0.053 0.087 0.033 0.082 1.0050 0.00037 14 1.068 1.013 4.064 3.064
0.013 1 0.086 1.036 0.049 1.005 1.0315 0.00060 11 ½ 2.050 1.068 3.064 2.090
0.014 1 ¼ 1.050 2.016 0.067 1.038 1.0660 0.00104 11 ½ 3.038 2.027 2.077 2.030
0.015 1 ½ 2.004 2.084 0.080 1.061 1.0900 0.00141 11 ½ 4.004 2.072 2.037 2.001
0.015 2 3.036 4.043 1.008 2.007 2.0375 0.00233 11 ½ 5.043 3.065 1.085 1.061
0.020 2 ½ 4.079 6.049 1.070 2.047 2.0875 0.00333 8 8.062 5.079 1.055 1.033
0.022 3 7.039 9.062 2.023 3.007 3.0500 0.00513 8 11.027 7.058 1.025 1.009
0.023 3 ½ 9.089 12.056 2.068 3.055 4.0000 0.00687 8 13.056 9.011 1.008 0.095
0.024 4 12.073 15.090 3.017 4.003 4.0500 0.00884 8 16.006 10.079 0.095 0.085
0.026 5 20.000 24.030 4.030 5.005 5.0563 0.01389 8 21.074 14.061 0.076 0.069
0.028 6 28.089 34.047 5.058 6.007 6.0625 0.02006 8 28.023 18.097 0.063 0.058
0.032 8 50.002 58.042 8.040 7.098 8.0625 0.03552 8 42.049 28.055 0.048 0.044
0.037 10 78.085 90.076 11.090 10.002 10.0750 0.05476 8 60.024 40.048 0.038 0.036
0.041 12 111.090 127.064 15.074 11.094 12.0750 0.07763 8 79.077 53.060 0.032 0.030
0.044 14 135.030 153.094 18.064 13.013 14.0000 0.09354 8 93.075 63.000 0.028 0.027
0.050 16 176.070 201.005 24.035 15.000 16.0000 1.02230 8 116.008 78.000 0.025 0.024
0.056 18 224.000 254.085 30.085 16.088 18.0000 1.05550 8 156.026 105.000 0.023 0.021
0.059 20 278.000 314.015 36.015 18.081 20.0000 1.09260 8 183.005 123.000 0.020 0.019
0.069 24 402.010 452.040 50.030 22.063 24.0000 2.07930 8 254.048 171.000 0.017 0.016

 

Available size of Alloy 718 Square Tube
DIMENSIONS WEIGHT PER WALL DIMENSIONS WEIGHT PER WALL
(MM) METRE (KG) (MM) (MM) METRE (KG) (MM)
12.07 x 12.07 0.044 1.020 40 x40 1.049 1.020
12.07 x 12.07 0.055 1.050 40 x40 1.085 1.050
15 x 15 0.053 1.020 40 x40 2.045 2.000
15 x 15 0.065 1.050 40 x40 3.075 3.000
20 x 20 0.071 1.020 50 x50 2.032 1.050
20 x 20 0.088 1.050 50 x50 3.008 2.000
20 x 20 1.019 2.000 50 x50 4.065 3.000
25 x 25 0.092 1.020 60 x60 3.071 2.000
25 x 25 1.014 1.050 60 x60 5.049 3.000
25 x 25 1.049 2.000 70 x70 6.053 3.000
25 x 25 2.020 3.000 80 x80 4.098 2.000
30 x 30 1.010 1.020 80 x80 7.053 3.000
30 x 30 1.037 1.050 100 x 100 6.040 2.000
30 x 30 1.084 2.000 100 x 100 9.053 3.000
30 x 30 2.072 3.000

 

ASME B36.10M Alloy 718 Pipe Schedule Chart
3 1/2" IPS( 4.000"O. D.)
1/8" IPS(.405"O. D.)
SCH 40, 10, 160, 80, XXH
SCH 40, 80
4" IPS(4.500"O. D.)
1/4" IPS(.540"O. D.)
SCH 40, 10, 160, 80, XXH
SCH 40, 10, 80
5" IPS( 5.563"O. D.)
3/8" IPS(.675"O. D.)
SCH 40, 10, 160, 80, XXH
SCH 40, 10, 80
6" IPS(6.625"O. D.)
1/2" IPS(.840"O. D.)
SCH 10, 5, 80, 40, 160, 120 XXH
SCH 5, 40, 10, 160, 80, XXH
8 ” IPS(8.625"O. D.)
3/4" IPS(1.050"O. D.)
SCH 10, 5, 80, 40, 160, 120 XXH
SCH 40, 10, 160, 80, XXH
10" IPS(10.750"O. D.)
1" IPS:(1.315′O. D.)
SCH 10, 20, TRUE 80(.500), 40, 80 (.500),
SCH 5, 40, 10, 160, 80, XXH
12" IPS(12.750"O. D.)
1-1/4" IPS(1.660"O. D.)
SCH 10, 20, TRUE40(.406), 40(.375), SCH80(.500)
SCH 40, 10, 160, 80, XXH
14" IPS(14.000"O. D.)
1-1/2" IPS(1.900"O. D.)
SCH10(.188), SCH40(.375)
SCH 40, 10, 160, 80, XXH
16" IPS(16.000"O. D.)
2" IPS(2.375"O. D.)
SCH10(.188), SCH40(.375)
SCH 40, 10, 160, 80, XXH
18" IPS (18.000"O. D.)
2 1/2" IPS(2.875"O. D.)
SCH-40 (.375)
SCH 40, 10, 160, 80, XXH
 
3" IPS( 3.500"O. D.)
 
SCH 5, 40, 10, 160, 80, XXH

 

Ranging in size from Astm B163 Alloy 718 welded pipe
Pipe WT
mm
ASME SB163 Alloy 718 Pipe OD
mm
Sch
in.0
Kg/m
1.065
13.072
10S
1/4
0.050
2.024
13.072
40S
1/4
0.064
3.002
13.072
80S
1/4
0.081
1.065
17.015
10S
3/8
0.064
2.031
17.015
40S
3/8
0.086
3.020
17.015
80S
3/8
1.012
2.011
21.034
10S
1/2
1.002
2.077
21.034
40S
1/2
1.029
3.073
21.034
80S
1/2
1.065
2.011
26.067
10S
3/4
1.030
2.087
26.067
40S
3/4
1.071
3.091
26.067
80S
3/4
2.023
2.077
33.040
10S
1
2.013
3.038
33.040
40S
1
2.054
4.055
33.040
80S
1
3.029
6.0352)
33.040
160
1
4.030
2.077
42.016
10S
1¼
2.073
3.056
42.016
40S
1¼
3.044
4.085
42.016
80S
1¼
4.053
6.0352)
42.016
160
1¼
5.069
2.077
48.026
10S
1½
3.016
3.068
48.026
40S
1½
4.011
5.008
48.026
80S
1½
5.049
2.077
60.033
10S
2
3.099
3.091
60.033
40S
2
5.052
5.054
60.033
80S
2
7.060
8.0742)
60.033
160
2
11.029
3.005
73.003
10S
2½
5.035
5.016
73.003
40S
2½
8.077
7.001
73.003
80S
2½
11.059
3.005
88.090
10S
3
6.056
5.049
88.090
40S
3
11.047
7.062
88.090
80S
3
15.051
11.0132)
88.090
160
3
21.067
3.005
101.060
10S
3½
7.053
5.074
101.060
40S
3½
13.078
8.008
101.060
80S
3½
18.092
3.005
114.030
10S
4
8.050
6.002
114.030
40S
4
16.032
8.056
114.030
80S
4
22.067
13.0492)
114.030
160
4
34.005
6.055
141.030
40S
5
22.010
9.053
141.030
80S
5
31.044
15.0882)
141.030
160
5
49.087
3.04
168.028
10S
6
14.004
7.011
168.028
40S
6
28.069
10.097
168.028
80S
6
43.021
14.027
168.028
120
6
54.075
18.0262)
168.028
160
6
68.059
8.018
219.008
40S
8
43.020
12.07
219.008
80S
8
65.063
18.023
219.008
120
8
91.030
23.0012)
219.008
160
8
112.097


OD = Inconel 718 Pipe outside diameter
WT = Inconel 718 Pipe wall thickness

Great Inconel 718 Pipe suppliers in Mumbai, India offer these Inconel Alloy 718 Tube and Tubing in different size range, from thin wall to thick wall in coils or straight lengths.

 

We Stock and supply Alloy 718 Nickel Tubings, Buy Asme Sb516 718 Inconel Coiled Tubing in your length and save cost.

 

Weight table ASME SB163 Alloy 718 Seamless Tube
Avarage Wall inches Outside Diameter inches Internal Area (in2) Inside Diameter inches D/t Ratio Tube Cross Sectional Area (in2)
0.0020 0.0250 0.00346 0.0210 12.050 0.00145
0.0028 0.0250 0.00296 0.0194 8.093 0.00195
0.0035 0.0250 0.00254 0.0180 7.014 0.00236
0.0049 0.0250 0.00181 0.0152 5.010 0.00309
0.0065 0.0250 0.00113 0.0120 3.085 0.00378
0.0020 0.0375 0.00881 0.0335 18.075 0.00223
0.0028 0.0375 0.00799 0.0319 13.039 0.00305
0.0035 0.0375 0.00731 0.0305 10.071 0.00374
0.0049 0.0375 0.00603 0.0277 7.065 0.00502
0.0065 0.0375 0.00471 0.0245 5.077 0.00633
0.0020 0.0500 0.01662 0.0460 25.000 0.00302
0.0028 0.0500 0.01548 0.0444 17.086 0.00415
0.0035 0.0500 0.01452 0.0430 14.029 0.00511
0.0049 0.0500 0.01213 0.0402 10.020 0.00694
0.0065 0.0500 0.01075 0.0370 7.069 0.00888
0.0083 0.0500 0.00876 0.0334 6.002 0.01087
0.0020 0.0625 0.02688 0.0585 31.025 0.00380
0.0028 0.0625 0.02543 0.0569 22.032 0.00525
0.0035 0.0625 0.02419 0.0555 17.086 0.00649
0.0049 0.0625 0.02181 0.0527 12.076 0.00887
0.0065 0.0625 0.01924 0.0495 9.062 0.01144
0.0083 0.0625 0.01655 0.0459 7.053 0.01413
0.0095 0.0625 0.01486 0.0435 6.058 0.01582
0.0109 0.0625 0.01301 0.0407 5.073 0.01767
0.0028 0.0750 0.03783 0.0694 26.079 0.00635
0.0035 0.0750 0.03632 0.0680 21.043 0.00786
0.0049 0.0750 0.03339 0.0652 15.031 0.01079
0.0065 0.0750 0.03019 0.0620 11.054 0.01399
0.0083 0.0750 0.02679 0.0584 9.004 0.01739
0.0095 0.0750 0.02463 0.0560 7.089 0.01955
0.0109 0.0750 0.02223 0.0532 6.088 0.02195
0.0120 0.0750 0.02043 0.0510 6.025 0.02375
0.0020 0.0875 0.05476 0.0835 43.075 0.00537
0.0028 0.0875 0.05268 0.0819 31.025 0.00745
0.0035 0.0875 0.05090 0.0805 25.000 0.00924
0.0049 0.0875 0.04742 0.0777 17.086 0.01272
0.0065 0.0875 0.04359 0.0745 13.046 0.01654
0.0083 0.0875 0.03948 0.0709 10.054 0.02065
0.0095 0.0875 0.03685 0.0685 9.021 0.02328
0.0109 0.0875 0.03390 0.0657 8.003 0.02623
0.0120 0.0875 0.0316L7 0.0635 7.029 0.02846
0.0028 1.0000 0.06999 0.0944 35.071 0.00855
0.0035 1.0000 0.06793 0.0930 28.057 0.01061
0.0049 1.0000 0.06390 0.0902 20.041 0.01464
0.0065 1.0000 0.05945 0.0870 15.038 0.01909
0.0083 1.0000 0.05463 0.0834 12.005 0.02391
0.0095 1.0000 0.05153 0.0810 10.053 0.02701
0.0109 1.0000 0.04803 0.0782 9.017 0.03051
0.0120 1.0000 0.04536 0.0760 8.033 0.03318
0.0134 1.0000 0.04208 0.0732 7.046 0.03646
0.0035 1.0250 1.00936 1.0180 35.071 0.01336
0.0049 1.0250 1.00423 1.0152 25.051 0.01849
0.0065 1.0250 0.09852 1.0120 19.023 0.02420
0.0083 1.0250 0.09229 1.0084 15.006 0.0316L3
0.0095 1.0250 0.08825 1.0060 13.016 0.03447
0.0109 1.0250 0.08365 1.0032 11.047 0.03907
0.0120 1.0250 0.08012 1.0010 10.042 0.04260
0.0134 1.0250 0.07574 0.0982 9.033 0.04698
0.0035 1.0500 1.06061 1.0430 42.086 0.01611
0.0049 1.0500 1.05438 1.0402 30.061 0.02234
0.0065 1.0500 1.04741 1.0370 23.008 0.02930
0.0083 1.0500 1.03977 1.0334 18.007 0.03695
0.0095 1.0500 1.03478 1.0310 15.079 0.04193
0.0109 1.0500 1.02908 1.0282 13.076 0.04763
0.0120 1.0500 1.02469 1.0260 12.050 0.05202
0.0134 1.0500 1.01921 1.0232 11.019 0.05750
0.0148 1.0500 1.01385 1.0204 10.014 0.06286
0.0035 1.0750 2.02167 1.0680 50.000 0.01886
0.0049 1.0750 2.08413 1.0902 40.082 0.03003
0.0065 1.0750 2.00612 1.0620 26.092 0.03441
0.0083 1.0750 1.09706 1.0584 21.008 0.04347
0.0095 1.0750 1.09113 1.0560 18.042 0.04939
0.0109 1.0750 1.08433 1.0532 16.006 0.05619
0.0120 1.0750 1.07908 1.0510 14.058 0.06145
0.0134 1.0750 1.07250 1.0482 13.006 0.06803
0.0148 1.0750 1.06604 1.0454 11.082 0.07449
0.0165 1.0750 1.05837 1.0420 10.061 0.08216
0.0035 2.0000 2.09255 1.0930 57.014 0.02161
0.0049 2.0000 2.08413 1.0902 40.082 0.03003
0.0065 2.0000 2.07465 1.0870 30.077 0.03951
0.0083 2.0000 2.06417 1.0834 24.010 0.04999
0.0095 2.0000 2.05730 1.0810 21.005 0.05685
0.0109 2.0000 2.04941 1.0782 18.035 0.06475
0.0120 2.0000 2.04328 1.0760 16.067 0.07087
0.0134 2.0000 2.03561 1.0732 14.093 0.07855
0.0148 2.0000 2.02805 1.0704 13.051 0.08611
0.0165 2.0000 2.01904 1.0670 12.012 0.09512

Alloy 718 welded pipe testing
  • Flaring Test
  • Flattening Test
  • Micro and MacroTest
  • Intergranular Corrosion (IGC) Test
  • Pitting Resistance Test
  • Chemical Analysis – Spectro Analysis
  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Positive Material Identification – PMI Testing

Inconel 718 Pipe Weight Chart
NPS
Wall Thickness
Outside Diameter
Weight
Weight
inch
milimeter
inch
milimeter
kg/Mtr
Schedule
Lb/ft
1/2″
0.0109
2.0769
0.0840
21
1.0268
40 STD
0.0851
0.0147
3.0734
1.0621
80 STD
1.0088
3/4″
0.0113
2.0870
1.0050
27
1.0684
40 STD
1.0131
0.0154
3.0912
2.0195
80 STD
1.0474
1″
0.0133
3.0378
1.0315
33
2.0501
40 STD
1.0679
0.0179
4.0547
3.0325
80 STD
2.0172
1 1/4″
0.0140
3.0556
1.0660
42
3.0385
40 STD
2.0273
0.0191
4.0851
4.0464
80 STD
2.0997
1 1/2″
0.0145
3.0683
1.0900
48
4.0048
40 STD
2.0718
0.0200
5.0080
5.0409
80 STD
3.0361
2″
0.0154
3.0912
2.0375
60
5.0441
40 STD
3.0653
0.0218
5.0537
7.0480
80 STD
5.0022
2 1/2″
0.0203
5.0516
2.0875
73
8.0629
40 STD
5.0793
0.0276
7.0010
11.0411
80 STD
7.0661
3″
0.0216
5.0486
3.0500
89
11.0284
40 STD
7.0576
0.0300
7.0620
15.0272
80 STD
10.0253
4″
0.0237
6.0020
4.0500
114
16.0073
10.0790
0.0337
8.0560
22.0318
14.0983
6″
0.0188
4.0775
6.0625
168
19.0252
12.0924
0.0203
5.0516
20.0739
13.0923
0.0219
5.0563
22.0318
14.0983
0.0250
6.0350
25.0354
17.0021
0.0280
7.0112
58.0263
40 STD
18.0974
0.0312
7.0925
31.0334
21.0036
0.0375
9.0525
37.0285
25.0031
0.0432
10.0973
42.0561
80 XHY
28.0573
0.0500
12.0700
48.0719
32.0708
8″
0.0188
4.0775
8.0625
219
25.0233
16.0940
0.0203
5.0156
27.0198
18.0259
0.0219
5.0563
29.0286
19.0661
0.0250
6.0350
33.0308
20
22.0361
0.0277
7.0036
36.0786
30
24.0696
0.0322
8.0179
42.0352
40
28.0554
0.0375
9.0525
49.0216
33.0041
0.0406
10.0312
53.0085
60
35.0638
0.0500
12.0700
64.0627
80 XHY
43.0388
10″
0.0188
4.0775
10.0750
273
31.0588
21.0207
0.0219
5.0563
36.0689
24.0631
0.0250
6.0350
41.0759
20
28.0035
0.0307
7.0798
51.0002
30
34.0240
0.0344
8.0738
56.0946
38.0231
0.0365
9.0271
63.0301
40 STD
40.0483
0.0438
11.0125
71.0852
48.0238
0.0500
12.0700
81.0530
60 XHY
54.0735
0.0594
15.0088
95.0969
80
64.0429
12″
0.0188
4.0775
12.0750
324
37.0570
25.0222
0.0219
5.0563
43.0657
29.0309
0.0250
6.0350
49.0713
33.0375
0.0281
7.0137
55.0739
37.0420
0.0312
7.0925
61.0735
41.0445
0.0375
9.0525
73.0824
49.0562
0.0406
10.0312
79.0727
53.0525
0.0500
12.0700
97.0438
65.0415
0.0562
14.0275
108.0966
73.0154
14″
0.0188
4.0775
14.0000
356
41.0308
27.0732
0.0219
5.0563
48.0012
32.0233
0.0250
6.0350
54.0685
20
36.0713
0.0281
7.0137
61.0327
41.0172
0.0312
7.0925
67.0939
45.0611
0.0375
9.0525
81.0281
STD
54.0568
0.0438
11.0125
94.0498
40
63.0441
0.0500
12.0700
107.0381
XHY
72.0090
0.0625
15.0875
132.0983
89.0278
16”
0.0188
4.0775
16.0000
406
47.0290
21.0748
0.0219
5.0563
54.0980
36.0910
0.0250
6.0350
62.0639
10
42.0053
0.0281
7.0137
70.0268
47.0174
0.0312
7.0925
77.0866
20
52.0275
0.0344
8.0738
85.0677
57.0519
0.0375
9.0525
93.0213

30

STD
62.0578
0.0438
11.0125
108.0433
72.0797
0.0500
12.0700
123.0289

40

XHY
82.0770
18″
0.0219
5.0563
18.0000
457
61.0948
41.0588
0.0250
6.0350
70.0593
47.0393
0.0281
7.0137
79.0208
53.0176
0.0312
7.0925
87.0792
20
58.0939
0.0375
9.0525
105.0144
STD
70.0588
0.0438
11.0125
122.0369
30
82.0152
0.0500
12.0700
139.0198
XHY
93.0450
0.0562
14.0275
155.0904
40
104.0666
0.0625
15.0875
172.0754
115.0978
20″
0.0250
6.0350
20.0000
508
78.0547
52.0733
0.0282
7.0163
88.0458
59.0386
0.0312
7.0925
97.0719
65.0604
0.0375
9.0525
117.0075
20 STD
78.0598
0.0438
11.0125
136.0305
91.0508
0.0500
12.0700
155.0106
30 XHY
104.0130
0.0594
15.0088
183.0378
40
123.0110
0.0625
15.0875
192.0640
129.0328
0.0688
17.0475
211.0368
141.0901
24″
0.0250
6.0350
24.0000
610
94.0456
63.0413
0.0281
7.0137
106.0029
71.0183
0.0312
7.0925
117.0573
18.0932
0.0375
9.0525
140.0938
20 STD
64.0618
0.0438
11.0125
164.0176
110.0219
0.0500
12.0700
186.0923
XHY
125.0490
0.0625
15.0875
232.0410
156.0028
0.0688
17.0475
255.0148
40
171.0293
0.0750
19.0050
277.0401
186.0233
30″
0.0250
6.0350
30.0000
762
118.0318
79.0433
0.0281
7.0137
132.0851
89.0189
0.0312
7.0925
147.0353
10
98.0925
0.0375
9.0525
176.0731
STD
118.0648
0.0438
11.0125
205.0983
138.0286
0.0500
12.0700
234.0647
20 XHY
157.0530
0.0625
15.0875
292.0066
30
196.0078
0.0688
17.0475
320.0817
215.0380
0.0750
19.0050
348.0988
234.0293
36″
0.0250
6.0350
36.0000
914
142.0180
95.0453
0.0281
7.0137
159.0672
107.0196
0.0312
7.0925
177.0133
10
118.0918
0.0375
9.0525
215.0525
STD
142.0678
0.0438
11.0125
247.0790
166.0353
0.0500
12.0700
282.0372
20 XHY
198.0570
0.0625
15.0875
351.0723
236.0128

0.0688
17.0475
386.0487
259.0467

0.0750
19.0050
420.0576
282.0353
42″
0.0312
7.0925
42.0000
1067
206.0914
138.0911
0.0375
9.0525
248.0319
STD
166.0708
0.0500
12.0700
33.0097
XHY
221.0610
0.0750
19.0050
492.0163
330.0413
48″
0.0375
9.0525
48.0000
1219
284.0112
STD
190.0738
0.0438
11.0125
331.0404
222.0487
0.0500
12.0700
377.0822
XHY
253.0650
0.0750
19.0050
563.0750
378.0473
0.0875
22.0225
655.0969
440.0383

 

Nickel Alloy 718 Pipe Documentation
  • NABL approved Laboratory Test Reports
  • Material Traceability Records
  • Form A for the purposes of the Generalized System of Preferences (GSP)
  • Raw Material Test Reports
  • Commercial Invoice which includes HS Code
  • Guarantee Letter
  • Quality Assurance Plan (QAP)
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Heat Treatment Charts
  • as per EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
  • Fumigation Certificates

 

Stockist of Nickel Alloy 718 ERW Tubes of Renowned manufacturers with Mill Test Certificate EN 10204/3.1B

 

Pressure Rating of DIN 2.4668 Pipe and Tube
Inconel 718 Pipe O.D.
(in.)		 Wall Thickness of Inconel 718 Pipe (inches)
0.028 0.035 0.083 0.049 0.065 0.095 0.109 0.120
  Working Pressure (psig)
1/8 7900 10100            
1/4 3700 4800   7000 9500      
5/16   3700   5400 7300      
3/8   3100   4400 6100      
1/2   2300   3200 4400      
3/4     4000 2200 3000 4600    
1     2900   2200 3400 3900 4300

 

Frequently Used Inconel 718 Pipe and Tube For Sale
Inconel 718 Exhaust Pipes
Inconel 718 718 Inconel Round Pipes
Schedule 40 Inconel 718 Pipes
UNS N07718 EFW Pipes
Inconel 718 Pipes material
Inconel 718 Hexagonal Pipes
ASME SB163 Inconel 718 Capillary Pipes
Astm B163 2.4668 Inconel 718 Custom Pipes
Small diameter Inconel 718 Pipes
Inconel 718 Rectangular Pipes
High pressure 718 Inconel Pipes
Capillary ASME SB163 Inconel 718 Thin Pipes
DIN NR. 2.4668 Clad Pipes
Inconel 718 Bush Hex Pipes
Inconel 718 Thin Wall Pipes
718 alloy Square Pipes
Inconel 718 Rectangular Tube
Inconel 718 elliptical and Oval Tube
Inconel 718 SCH 80 Tube
2.4668 Inconel 718 Alloy SCH 40 Tube
Inconel 718 Bellows Tubes
Inconel 718 High-strength capillary tubing
Inconel 718 Transmission Tubes
ASME SB163 2.4668 Inconel 718 precision Tubes
Astm B163 Inconel 718 Electropolished Tube
Inconel 718 Instrumentation Tube
Inconel 718 Electropolished Tube
Inconel 718 Seamless Hollow Tube
Astm B516 2.4668 Inconel 718 Oil & Gas Tubing
Inconel 718 Condenser Tube
Inconel 718 SCH 80 Tube
Inconel 718 SCH 40 Tube
Inconel 718 Aero engine Tubes
Inconel 718 cold drawn seamless Tubes
Inconel 718 Furnace Tubes
Inconel 718 Gas Tubing
Inconel 718 Cold drawn seamless tubing (CDS)
Inconel 718 Hot finished seamless tubing (HFS)
Inconel 718 High Pressure Tubes
2.4668 Inconel 718 Alloy Precision Tubing
ASME SB163 UNS N07718 Capillary Tubing
Inconel 718 Bourdon Tubes
Inconel 718 Finned Tubes
Inconel 718 Drawn over mandrel (DOM)
Inconel 718 Furnace Tubes
Inconel 718 Aerospace Engine Tubes
Inconel 718 seamless straight tubing
Inconel 718 seamless coil tubing

 

Outer Diameter (OD) of Inconel 718 Tube
Types Out diameter Length Wall thickness
NB Sizes (available) 1/8” ~ 8” Upto 6 Meters SCH 40 /SCH 10 /SCH 160/ SCH 5 / SCH 80
Inconel 718 Seamless tube  (as per need) 5.00 milimeter ~ 203.02 milimeter as per need
Inconel 718 Welded tube (available + as per need) 5.00 milimeter ~ 1219.02 milimeter 1.00 ~ 15.00 milimeter

 

Do you know who are the best buyers of Inconel 718 Pipe
Chile, Iran, Canada, Philippines Inconel 718 Nickle Alloy Tubing/Tube/Pipe
United Arab Emirates (UAE), Norway, Romania, Europe Inconel 718/Alloy 713c/Heat-Resisting Stainless Steel Pipe
Netherlands, Russia, Malaysia,  Sweden

Micro Precision High Consistency N07718 Inconel 718 Nickel Pipe
Egypt, Mexico, Los Alamos -Mexico, Malaysia Inconel 718 Perforated Nickel Alloy Pipe
United Kingdom -UK,  Malaysia, NY 12203 (USA), Singapore Steel Tube Inconel 718 Pipe
UK, Poland, Philippines, Dammam -KSA Inconel Alloy Seamless Steel 718 Pipe
Singapore,  Malaysia, Europe, Qatar Inconel 718/2.4668 Oxidation Resistant Stainless Steel Pipe
Malaysia, Japan, Thailand, Czechia Inconel 718 Nickel Alloy Seamless Pipe
 Malaysia, Bangladesh, Colombia, China Inconel 718 Seamless Tube/Pipe
Taiwan, South Africa, Kuwait, Philippines ASTM B622 Inconel 718 Seamless Pipe
Malaysia, South Korea, Singapore, Bahrain Inconel 718 Alloy Tube
UK, Philippines, Indonesia, Belgium 2.4668 Nickel Alloy Uns N07718 Inconel 718 Stainless Steel Pipe
Thailand, France, Hong Kong, Oman Oxidation Temperature U Bends Inconel 718 Pipe
 Malaysia, Turkey, Malaysia, Germany 15 Inch Large Diameter Seamless Inconel 718 Nickel Alloy Pipe
Malaysia, USA,  Dubai, Finland Inconel 718 Nickel-Gold Alloy Steel Pipe
Brazil, Saudi Arabia (KSA), Spain, UK N07718 /Alloy 718/Inconel 718 Stainless Steel Pipe
Singapore, South Africa, Europe, UAE Inconel 718 Nickel Alloy Seamless Pipe

 

Finishes and Coatings of Inconel Alloy 718 Heat Exchanger Tube
  • Novolac Epoxy
  • High Functionality Epoxy - Curran Coating
  • liquid epoxy coatings
  • Thin Film Engineered Polymer Coatings
  • HVAC Chillers and Heat Exchanger Coatings
  • Sakaphen- Shell and tube heat exchanger lining
  • Surface Condenser Tube Sheets
  • IGS high velocity thermal spray (HVTS) coating solutions
  • Phenol Epoxy
  • Curran 1000 T Hybrid Epoxy

 

718 Inconel Welded Tube Tolerances
WALL THICKNESS INCHES OD +/- INCHES OD INCHES
0.0025 - 0.0065 0.0005 1/2" - 1" incl0.0
Over 0.0065 - 0.0134 0.0010
0.0025 - 0.0065 0.0008 1 - 1-1/2" incl0.0
Over 0.0065 - 0.0134 0.0010
0.0025 - 0.0049 0.0010 1-1/2" - 2" incl0.0
Over 0.0049 - 0.0083 0.0011
Over 0.0083 - 0.0148 0.0012
0.0032 - 0.0065 0.0012 2" - 2-1/2" incl0.0
Over 0.0065 - 0.0109 0.0013
Over 0.0109 - 0.0165 0.0014
0.0032 - 0.0165 0.0014 2-1/2" - 3-1/2" incl0.0
Over 0.0165 - 0.0220 0.0020
0.0083 - 0.0165 0.0020 3-1/2" - 5" incl0.0
Over 0.0165 - 0.0220 0.0025

 

Industrial Application of ASME SB163 718 Inconel Pipe and Tube
  • Jet engine
  • High speed airframe parts
  • Gas turbine operations
  • Plastic injection molded tools
  • High temperature bolts & fasteners

 

Physical Properties Of Alloy 718 Pipe
Density g/centimeter3 8.019
Thermal Conductivity W.m -1.°K-1 11.04
Electrical Resistivity μohm/cm 1.032
Specific Heat (0-100°C) J.kg-1.°K-1 435
Modulus Elasticity GPa 200
Thermal Expansion μm/μm/°C 13

 

718 Inconel welded pipe Material Equivalent Grade
STANDARD UNS EN WERKSTOFF NR. JIS GOST BS AFNOR
Inconel 718 N07718 – 2.4668 NCF 718 – – –

 

Astm B163 Inconel 718 Pipe and Tube Chemical Structure
element Minimum Maximum
Si - 0.035
C - 0.008
P - 0.0015
Ti 0.065 1.015
Mn - 0.035
B - 0.06
Al 0.02 0.08
Cr 17 21
Co - 1
Fe Balance
Cu - 0.03
Nb 4.075 5.05
Mo 2.08 3.03
Ni 50 55

 

Inconel 718 Pipe and Tube Yield Strength
Temper Solution-treated
Tensile Rm 155 ksi (minimum)
Tensile Rm 1069 MPa (minimum)
R.p. 0.2% Yield 95 ksi (minimum)
R.p. 0.2% Yield 655 MPa (minimum)
Elongation (2” or 4D gl) 30 % (minimum)

 

 

 

Our Products

 

Other Products

© Copyright Victor Steel Corporation 2020. All Rights Reserved.